Table of Content:
1 Introduction
1.1 Foreword
1.2 Trademarks
1.3 A Message to Our Customers
1.4 John Deere Technical Information Bookstore
2 Safety
2.1 Recognize Safety Information
2.2 Follow Safety Instructions
2.3 Understand Signal Words
2.4 Observe Road Traffic Regulations
2.5 Parking and Leaving the Machine
2.6 Prevent Machine Runaway
2.7 Use Safety Lights and Devices
2.8 Prepare for Emergencies
2.9 Wear Protective Clothing
2.10 Handle Agricultural Chemicals Safely
2.11 Handle Fuel Safely?Avoid Fires
2.12 Store Attachments Safely
2.13 Check Machine Safety
2.14 Use Steps and Handholds Correctly
2.15 Handle Electronic Components and Brackets Safely
2.16 Use Electronic Display Properly
2.17 Operate Guidance Systems Safely
2.18 Read the Guidance Manual
2.19 Cutterhead Access Foot Step
2.20 Engine Compartment Access Ladder
2.21 Keep Riders and Children off Machine
2.22 Instructional Seat
2.23 Use Seat Belts
2.24 Road Safety Mode Button
2.25 Drive the Machine
2.26 Avoid Backover Accidents
2.27 Guards and Shields
2.28 Handle Knives
2.29 Stay Clear of Harvesting Units
2.30 Keep Hands Away From Knives
2.31 Stay Clear of Rotating Drivelines
2.32 Avoid Entanglement
2.33 Transport With Header Installed
2.34 Emergency Exit
2.35 Radio Aerial
2.36 Work In Ventilated Area
2.37 Avoid Hot Exhaust
2.38 Avoid Static Electricity Risk When Refueling
2.39 Practice Safe Maintenance
2.40 Service Machines Safely
2.41 Support Machine Properly
2.42 Service Accumulator Systems Safely
2.43 Avoid High-Pressure Fluids
2.44 Prevent Battery Explosions
2.45 Prevent Acid Burns
2.46 Follow Tire Recommendations
2.47 Retorque Wheel Bolts and Nuts
2.48 Service Tires Safely
2.49 Service Cooling System Safely
2.50 Speed Limit
2.51 Decommissioning ? Proper Recycling and Disposal of Fluids and Components
2.52 Avoid High-Pressure Jet on Safety Decals
2.53 Machine Safety Features
2.54 Safety Decals
2.55 Remove Accumulated Crop Debris
2.56 Cleaning and Inspection – Instructions
2.57 Fire Extinguisher Recommendations
2.58 Fire Prevention – Instructions
2.59 Operate a Fire Extinguisher
2.60 In Case of Fire
2.61 Automatic Guidance System Detected
2.62 Use Electronic Display Properly
2.63 Prevent Electrical Shock and Fires
2.64 Avoid Exposure to High Radio Frequency Fields
3 Operating the Controls and Displays
3.1 Cab Access
3.2 Cab Doors
3.3 Emergency Exit Cab Hammer
3.4 Steering Column
3.5 Windshield Wiper/Washer Selector Switch
3.6 ComfortCommand? Operator’s Seat (Premium Cloth Seat)
3.7 ComfortCommand? Operator’s Seat (Premium Leather Seat)
3.8 Left-Hand Armrest and Seat Back (Premium Cloth/Leather Seat)
3.9 Heated/Ventilated Seat Switch (Premium Cloth/Leather Seat)
3.10 Lumbar Support Switch (Premium Leather Seat)
3.11 Instructional Seat
3.12 Seat Belts
3.13 CommandTouch? Armrest and CommandARM? Control Consoles
3.14 CommandCenter? Display
3.15 Overhead Control Panel
3.16 Rear-View Mirror and Outside Mirrors
3.17 Cab Roof
3.18 Brake Pedals
3.19 Cab Interior Lights
3.20 Power Outlet Socket Strip
3.21 Cab 12-V Sockets
3.22 GreenStar? 4640 Display and Video Signal Socket
3.23 Images Collected From Camera Devices
3.24 Service ADVISOR? Diagnostic Socket
3.25 USB Port
3.26 Refrigerator (If Equipped)
3.27 Storage Locations
3.28 CommandTouch? Armrest Console
3.29 Road Safety Mode Button
3.30 Engine Speed Buttons
3.31 Main Clutch Switch
3.32 Gear Buttons (PBST Machines Only)
3.33 Park Brake Button
3.34 Differential Lock Button (ProDrive? Machines Only)
3.35 Four-Wheel Drive Button
3.36 Traction Control Button (ProDrive? Transmission Only)
3.37 Left, Right, and Rear Wiper Buttons (If Equipped)
3.38 Air Compressor Button
3.39 Row Guidance Offset Control Dial (If Equipped)
3.40 Header Height/Ground Pressure Control Dial
3.41 ProTouch Functions Button (If Equipped)
3.42 CommandARM? Controls
3.43 Menu Button
3.44 Home Button
3.45 Header Settings Button
3.46 Cutterhead Assembly Settings Button
3.47 Additive Dosing System Settings Button (If Equipped)
3.48 Spout Settings Button
3.49 Engine Settings Button
3.50 Vehicle Settings Button
3.51 Operator Settings Button
3.52 Statistics Button
3.53 ClimaTrak? Automatic Temperature Control
3.54 Radio Controls (If Equipped)
3.55 Machine Lights (Depending on Machine Equipment)
3.56 Machine Hydraulic Functions
3.57 Spout Raise/Lower Switch
3.58 SCV I Switch
3.59 SCV II Switch
3.60 Wagon Dump Switch (If Equipped)
3.61 CommandCenter? Display
3.62 CommandCenter? Display Navigation
3.63 CommandCenter? Display Startup Sequence
3.64 CommandCenter? Display Functions Icons
3.65 Corner Post Display
3.66 GreenStar? 4640 Display
3.67 Multi-Function Lever
3.68 Quick Stop Button
3.69 Header Engage/Reverse Switch
3.70 Activation Buttons
3.71 Header Raise/Lower Switch
3.72 Header Tilt Switch (With AHC Option Only)
3.73 Spout Turn Switch
3.74 Spout Flap Raise/Lower Switch
3.75 Spout Return to Home Position Button (If Equipped with Automatic Spout Control Option)
3.76 Active Fill Control Button (If Equipped with Active Fill Control Option)
3.77 AutoTrac? Button
3.78 Configurable Switches
3.79 Configurable Switch R?T (Assigned to SCV I)
3.80 Configurable Switch P (Assigned to Horn)
3.81 Configurable Switch M?N (Assigned to Spout Raise/Lower)
3.82 Configurable Switch K?L (Assigned to SCV II)
3.83 Message Center Page
3.84 Display Main Page
3.85 Display Advanced Settings Page
3.86 Layout Manager Page
3.87 Access Manager Page
3.88 Home Page
3.89 Header Page
3.90 Header Drive Speed Control?Auto Mode
3.91 Header Drive Speed Control?Manual Mode
3.92 Header Setup Page
3.93 Header Advanced Settings Page
3.94 Selective Control Valve (SCV) Tab
3.95 Automatic Header Control
3.96 Header Height Resume (Return to Position) – Operation
3.97 Active Header Float (Return to Pressure) – Operation
3.98 Header Height Sensing (Machines with AHC Option Only) – Operation
3.99 Cutterhead Assembly Setup Page
3.100 Cutterhead Assembly Advanced Settings Tab (1)
3.101 Stone/Metal Detector and Kernel Processor Settings Tab (2)
3.102 JD XStream KP? Kernel Processor Bearing Temperatures Tab (3)
3.103 Knife Sharpening/Stationary Knife Adjustment
3.104 AutoLoc? Page
3.105 Metal/Stone Detector Operation
3.106 Additive Dosing System Page (Option)
3.107 Additive Dosing System Page?High Volume (Option)
3.108 Additive Dosing System Page?High and Low Volume (Option)
3.109 Additive Dosing System?Water Injection Bar
3.110 Operate High and Low Volume Dosing System with Water Injection Bar
3.111 Operate Water Injection Bar
3.112 Spout Speeds Page
3.113 Spout Setup Page
3.114 Auto Spout Positioning Page
3.115 Spout Fold/Unfold Timeout
3.116 Automatic Spout Control (Option)
3.117 Store and Assign Spout Position
3.118 Active Fill Control (Option)
3.119 Aftertreatment Indicators Overview
3.120 Required Machine Stop Warning
3.121 Engine Page
3.122 Engine Speed Management?Field Mode (ProDrive? Machines Only)
3.123 Engine Speed Management?Field Mode (PBST Machines Only)
3.124 Engine Speed Limit
3.125 Exhaust Filter Cleaning?Final Tier 4/Stage V Engines Only
3.126 Engine Settings Page
3.127 Vehicle Settings Page
3.128 Vehicle Lubrication
3.129 Header Lubrication
3.130 Tow Mode Page
3.131 Wiper Interval Page
3.132 Mass Flow Calibration
3.133 Diagnostics Information
3.134 Spout Fold Hydraulic Pressure Relief Function
3.135 Lighting Setup Page
3.136 Machine Lighting
3.137 Machine Lighting?Lower Front Location
3.138 Machine Lighting?Upper Front Location
3.139 Machine Lighting?Rear and Side Location
3.140 Operator Settings Page
3.141 Programmable Switch Function Assignment
3.142 ProTouch Page
3.143 ProTouch?Field Transition Status Page
3.144 ProTouch?Road Transition Status Page
3.145 Harvest Statistics Page
3.146 Machine Performances Page
3.147 Statistics Settings Page
3.148 Diagnostic Trouble Code Priorities
3.149 Access Diagnostic Trouble Codes Menu
3.150 AutoTrac? RowSense? Guidance (Option)
3.151 GreenStar? Settings Page
3.152 GreenStar? Guidance Page
3.153 GreenStar? Machine/Implement Pages
3.154 Enable/Activate/Operate AutoTrac? RowSense?
3.155 Calibrate the Row Sensor
3.156 Video Interface (Option)
3.157 Video Trigger Setup Page
3.158 Phone Interface (Option)
3.159 Audio Interface (Option)
3.160 Acoustic Alarm System
4 Field Operation
4.1 General
4.2 Selective Catalytic Reduction (SCR) System Overview
4.3 Prestarting Checks
4.4 Break in the Engine
4.5 Operate the Engine
4.6 Handle Starting Fluid Safely
4.7 Start the Engine With a Battery Booster or Charger
4.8 Disconnect the Battery on Machine with Final Tier 4/Stage V Engine
4.9 Battery Disconnect Switch
4.10 Operate the Exhaust Cleaning System
4.11 Transport Information
4.12 Tow the Machine
4.13 Ballast the Machine
4.14 Attach Weight Plates
4.15 Lateral Tilt Frame Locking Device
4.16 Machine Road Transport Guard (Germany and Italy Only)
4.17 Machine Road Transport Deflectors
4.18 Attach and Detach Header
4.19 Basic Settings of Machine
4.20 Operate Machine in Grass or Alfalfa Harvest
4.21 Operate Machine in Corn (Maize) Harvest
4.22 Operate Machine in Ear Corn Silage
4.23 Operate Machine in Whole Plant Silage
4.24 Operate Machine in Sorghum (Milo) Harvest
4.25 Operate the Air Compressor System (Option)
4.26 Operate the Grass Chute
4.27 Operate the Kernel Processor (Option)
4.28 Remove Kernel Processor
4.29 Install Kernel Processor
4.30 Adjust JD Premium KP? Kernel Processor Gap (Manual Adjustment)
4.31 Adjust JD XStream KP? Kernel Processor Gap (Manual Adjustment)
4.32 JD XStream KP? Kernel Processor Lubrication System Air Supply (If Equipped)
4.33 Adjust Lateral Tilt Frame Balance Springs
4.34 Open/Close Discharge Chute
4.35 Adjust Spiral/Recutter Floor
4.36 Adjust Smooth Roll Scraper
4.37 Adjust Feed Roll Springs
4.38 Adjust Feed Roll Bars
4.39 Cutterhead Knives
4.40 Stationary Knife
4.41 Kernel Processor Rolls
4.42 Feed Roll Paddles
4.43 Grass and Whole-Crop Machine Adaptation
4.44 Ear Corn Silage Machine Adaptation
4.45 Grain Panels (Corn)
4.46 Feed Roll Stone Deflector
4.47 Transfer Stereo Camera from Machine-to-Machine (If Equipped)
5 Lubrication and Maintenance
5.1 Required Emission-Related Information
5.2 General Cleaning Guidelines
5.3 Cutterhead Access Foot Step
5.4 Engine Compartment Access Ladder
5.5 Central Service Compartment Access
5.6 Tool Box Compartment
5.7 Service Lights (If Equipped)
5.8 12-V Power Outlets
5.9 Secure Cutterhead Lift Lock
5.10 Interactive Calibration Procedures
5.11 Break-in Service
5.12 After the First 10 Operating Hours
5.13 During the First 50 Operating Hours
5.14 After the First 100 Operating Hours
5.15 John Deere Break-In? Plus Engine Oil (8100?8600 and 9600 Final Tier 4/Stage V Engine Only)
5.16 John Deere Break-In? Engine Oil (8100?8600 Tier 3/Stage III A Engine Only)
5.17 John Deere Break-In? Engine Oil (8100?8600 Tier 2/Stage II Engine Only)
5.18 Diesel Engine Oil (8100?8600 and 9600 Final Tier 4/Stage V Engine Only)
5.19 Diesel Engine Oil (8100?8600 Tier 3/Stage III A Engine Only)
5.20 Diesel Engine Oil (8100?8600 Tier 2/Stage II Engine Only)
5.21 Engine Oil and Filter Service Intervals (8100?8600 and 9600 Final Tier 4/Stage V Engine Only)
5.22 Engine Oil and Filter Service Intervals (8100?8600 Tier 3/Stage III A Engine Only)
5.23 Engine Oil and Filter Service Intervals (8100?8600 Tier 2/Stage II Engine Only)
5.24 Transmission Oil
5.25 Hydraulic Oil
5.26 JD XStream KP? Kernel Processor Lubrication System Oil
5.27 Multipurpose Extreme Pressure Grease
5.28 General Multipurpose Grease
5.29 Grease for Automated Lubrication Systems
5.30 Brake Fluid (Push-Button Shift Transmission Only)
5.31 Capacities
5.32 Important Lubrication Instructions
5.33 Central Lubrication System
5.34 Refill/Bleed Central Lubrication System Reservoir
5.35 JD XStream KP? Kernel Processor Lubrication System Reservoir (If Equipped)
5.36 Greasing Points (Manually Lubricated)
5.37 Every 10 Operating Hours
5.38 Every 50 Operating Hours?Machine with Manual Grease Banks Only
5.39 Every 100 Operating Hours?Machine with Manual Grease Banks Only
5.40 Every 250 Operating Hours
5.41 Every 500 Operating Hours
5.42 Every 1000 Operating Hours
5.43 Every 1500 Operating Hours
5.44 Every 2000 Operating Hours
5.45 Every 2500 Operating Hours (8300?8600 and 9600)
5.46 As Required
5.47 Annually
5.48 Every 2 Years
5.49 Every 3 Years or 4500 Operating Hours
5.50 Every 4 Years or 6000 Operating Hours
5.51 Hydraulic Hose Replacement
5.52 Hydraulic System Cleanliness
5.53 Change Hydraulic System Oil
5.54 Replace Hydraulic System Reservoir Filter
5.55 Change Power Distribution Gearbox Oil
5.56 Replace Power Distribution Gearbox Oil Filter
5.57 Change ProDrive? Transmission Oil
5.58 Replace ProDrive? Transmission Hydraulic Oil Filter
5.59 Change Push-Button Shift Transmission Oil
5.60 Change Final Drive Oil
5.61 Change Header Gear Case Oil
5.62 Change Left Feed Roll Gear Case Oil
5.63 Change Right Feed Roll Gear Case Oil
5.64 Change Rear Axle Oil
5.65 Diesel Exhaust Fluid (DEF) ? Use in Selective Catalytic Reduction (SCR) Equipped Engines
5.66 Storing Diesel Exhaust Fluid (DEF)
5.67 Testing Diesel Exhaust Fluid (DEF)
5.68 Disposal of Diesel Exhaust Fluid (DEF)
5.69 Fill the Diesel Exhaust Fluid (DEF) Tank
5.70 Diesel Fuel
5.71 Handling and Storing Diesel Fuel
5.72 Lubricity of Diesel Fuel
5.73 Testing Diesel Fuel
5.74 Biodiesel Fuel
5.75 Fill the Fuel Tank
5.76 Minimizing the Effect of Cold Weather on Diesel Engines
5.77 Mixing of Lubricants
5.78 Oilscan? and CoolScan?
5.79 Alternative and Synthetic Lubricants
5.80 Lubricant Storage
5.81 Oil Filters
5.82 Diesel Engine Coolant (engine with wet sleeve cylinder liners)
5.83 Supplemental Coolant Additives
5.84 Drain Intervals for Diesel Engine Coolant
5.85 Additional Information About Diesel Engine Coolants and John Deere LIQUID COOLANT CONDITIONER
5.86 Testing Diesel Engine Coolant
5.87 Operating in Warm Temperature Climates
5.88 Adjust Engine Valve Clearance
5.89 Check Engine Oil Level (8100?8600 Only)
5.90 Change Engine Oil and Filter (8100 and 8200 Final Tier 4/Stage V and Tier 3/Stage III A Engine Only)
5.91 Change Engine Oil and Filter (8100 and 8200 Tier 2/Stage II Engine Only)
5.92 Change Engine Oil and Filter (8300?8600 and 9600 Final Tier 4/Stage V Engine Only)
5.93 Change Engine Oil and Filter (8300?8600 Tier 2/Stage II and Tier 3/Stage III A Engine Only)
5.94 Check Engine Weep Hole
5.95 Do Not Open High-Pressure Fuel System
5.96 Do Not Modify Fuel System
5.97 Fuel Tank Breather
5.98 Drain Water Separator
5.99 Drain Fuel Precleaner (8100?8600 Tier 2/Stage II Engine Only)
5.100 Replace Fuel Filter Elements (8100?8600 and 9600 Final Tier 4/Stage V and Tier 3/Stage III A Engine Only)
5.101 Replace Fuel Filter Elements (8100 and 8200 Tier 2/Stage II Engine Only)
5.102 Replace Fuel Filter Elements (8300?8600 Tier 2/Stage II Engine Only)
5.103 Check Fuel Injection Nozzles
5.104 Check Cooling Elements
5.105 Check the Rotary Screen
5.106 Engine Coolant
5.107 Engine Coolant Drain Valves
5.108 Drain, Flush, and Refill Cooling System
5.109 Check Alternator/Compressor and Air Compressor Drive Belt Wear
5.110 Check Fan Drive Belt Wear
5.111 Check Suction Fan Drive Belt Wear
5.112 Air Cleaner Elements
5.113 Air Intake Lines
5.114 Turbocharger
5.115 Diesel Particulate Filter Maintenance and Service
5.116 Exhaust Filter/Diesel Particulate Filter Ash Handling and Disposal
5.117 Exhaust Filter Disposal
5.118 Clean Diesel Exhaust Fluid (DEF) Tank
5.119 Clean Diesel Exhaust Fluid (DEF) Tank Filler Neck Filter
5.120 Replace Diesel Exhaust Fluid (DEF) Tank Header Suction Filter
5.121 Replace Diesel Exhaust Fluid (DEF) Pump Filter and Equalizing Element
5.122 Replace Diesel Exhaust Fluid (DEF) Tank Vent Filter
5.123 Open/Close Feed Roll Housing
5.124 Cutterhead Knives?General
5.125 Replace Cutterhead Knives
5.126 Replace Individual Knives
5.127 Replace Complete Set of Knives
5.128 Stationary Knife?General
5.129 Replace Stationary Knife
5.130 Knife Sharpening Device?General
5.131 Replace Sharpening Stone
5.132 Replace Spiral/Recutter Floor
5.133 Replace Recutter Floor Knives
5.134 Replace Feed Roll Stone Deflector
5.135 Replace Cutterhead Wear Plate
5.136 Replace Feed Roll Housing Wear Plate
5.137 Weld Near Electronic Control Units
5.138 Keep Electronic Control Unit Connectors Clean
5.139 Observe Electrical Precautions
5.140 Basic Electrical Component Handling – Precautions for Machines Equipped with Computer Controlled Systems
5.141 Battery Disconnect Switch
5.142 Fuse Center
5.143 Inline Fuses?12 V
5.144 Master Fuses?12 V
5.145 Cab Fuse (Diode Module Fuse)
5.146 Starter Relay
5.147 Kernel Processor Winch Relay (If Equipped)
5.148 Safety Rules When Replacing Halogen Bulbs
5.149 Replace Cab Headlight Bulb (Non Light Emitting Diode (LED) Lights)
5.150 Adjust Cab Headlights (Non Light Emitting Diode (LED) Lights)
5.151 Replace Cab Headlights (Light Emitting Diode (LED) Lights?If Equipped)
5.152 Adjust Cab Headlights (Light Emitting Diode (LED) Lights?If Equipped)
5.153 Replace Cab Halogen Light Bulb
5.154 Adjust Cab Halogen Lights
5.155 Replace Fascia or Side Finder Light Bulb (If Equipped)
5.156 Replace Lower Driving or Lower Work Light Bulb (If Equipped)
5.157 Adjust Lower Driving or Lower Work Lights (If Equipped)
5.158 Replace Beacon Light (Light Emitting Diode (LED) Lights)
5.159 Replace Work Lights (If Equipped)
5.160 Replace Service Lights
5.161 Replace Tail, Stop or Turn Lights
5.162 Replace Cab Interior Light
5.163 Replace Map Light
5.164 Replace Toolbox Compartment Light
5.165 Replace Access Ladder Light
5.166 Replace License Plate Light
5.167 Rear Axle Toe-In
5.168 Hydrostatic Drive ? Adjusting Cable (Push-Button Shift Transmission Only)
5.169 Check Brake Fluid Reservoir (Push-Button Shift Transmission Only)
5.170 Check Park Brake Cylinder Cables (Push-Button Shift Transmission Only)
5.171 Brake System
5.172 Active Fill Control System (Option)
5.173 AutoTrac? RowSense? System (Option)
5.174 Additive Dosing System (Option)
5.175 Change Additive Dosing System Nozzle
5.176 Replace JD XStream KP? Kernel Processor Air Filter Element (if equipped)
5.177 Replace Fresh Air Filter
5.178 Replace Recirculation Air Filter
5.179 Check Refrigerant Level
5.180 Replace Blower Rear Wear Plates
5.181 Replace Blower Side Wear Plates
5.182 Replace Discharge Tower Wear Plates
5.183 Replace and Adjust Blower Paddles
5.184 Spout Service Opening and Wear Plates
5.185 Adjust Spout Motor Gear and Ring Gear
5.186 Adjust Kernel Processor Drive Belt Tension (8100 and 8200 Only)
5.187 Jacking Points
5.188 Service Tires Safely
5.189 Care and Service of Tires
5.190 Wheel Bolts and Nuts
5.191 Mounting Tires
5.192 Changing Tires
5.193 Tire Sizes
5.194 Tire Pressures
5.195 Use Genuine John Deere Parts
5.196 Engine Storage Guidelines for Long Term Storage
5.197 Prepare Machine for Storage
5.198 Remove Machine from Storage
6 Specifications
6.1 8100 Forage Harvester
6.2 8200 Forage Harvester
6.3 8300 Forage Harvester
6.4 8400 Forage Harvester
6.5 8500 Forage Harvester
6.6 8600 Forage Harvester
6.7 9600 Forage Harvester
6.8 8100?8600 and 9600 Forage Harvesters
6.9 Dimensions
6.10 Type Plates
6.11 Identify Date Code
6.12 Forage Harvester (Product Identification) Type Plate
6.13 Product Identification Number
6.14 Machine Component Serial Numbers
6.15 Metric Bolt and Screw Torque Values
6.16 Unified Inch Bolt and Screw Torque Values
6.17 EC Declaration of Conformity
6.18 EC Declaration of Conformity
6.19 EU Declaration of Conformity
6.20 EU Declaration of Conformity
6.21 Declaration of Conformity
6.22 Eurasian Economic Union?EAC
6.23 Eurasian Economic Union?EAC (English, Russian, and Kazakh)
6.24 Machine Design Life
6.25 Toxic or Hazardous Substances or Elements Disclosure?Image Processing Module (IPM)
6.26 Toxic or Hazardous Substances or Elements Disclosure?Motec Stereo Camera
6.27 FCC Notifications to User
6.28 Safety Note Regarding the Subsequent Installation of Electrical and Electronic Appliances and/or Components
6.29 Fluorinated Greenhouse Gas
7 Regulatory and Compliance Information
7.1 Federal Communications Commission Notifications to User
7.2 Federal Communications Commission Notifications to User
7.3 Third-Party Software Notifications and Licenses
7.4 Industry Canada Notifications to User
7.5 Identify Date Code
7.6 Identify Date Code
7.7 Toxic or Hazardous Substances or Elements Disclosure
7.8 CCC A Class Statement
7.9 Brazil?Declaration of Conformity
7.10 EU Declaration of Conformity
7.11 EU Declaration of Conformity
7.12 EU Declaration of Conformity
7.13 EU Declaration of Conformity
7.14 Customs Union?EAC
7.15 Federal Communications Commission (FCC)
7.16 Toxic or Hazardous Substances or Elements Disclosure
7.17 Identify Date Code
7.18 Eurasian Economic Union?EAC
7.19 EC Declaration of Conformity?HarvestLab? 3000 Sensor
7.20 Eurasian Economic Union?EAC (English and Russian) ? HarvestLab? 3000
7.21 EU Declaration of Conformity
7.22 Thailand?Declaration of Conformity
7.23 Vietnam?Declaration of Conformity
8 StarFire? 6000 Receiver (If Equipped)
8.1 StarFire? 6000 Receiver Theory of Operation
8.2 Display Compatibility
8.3 StarFire? 6000 Receiver Dust Protection
8.4 Install StarFire? 6000 Receiver
8.5 Remove StarFire? 6000 Receiver
8.6 Navigate to StarFire? Main Page Using GreenStar? 2 and GreenStar? 3 Displays
8.7 Navigate to StarFire? Main Page Using Generation 4 CommandCenter?
8.8 Activations Tab
8.9 Activations
8.10 Activation and Deactivation Codes
8.11 Enter Activation Code
8.12 Activation/Subscription Status Window
8.13 Receiver Correction Mode
8.14 Receiver Setup Tab
8.15 Receiver Mount Direction
8.16 Enter Receiver Fore/Aft
8.17 Enter Receiver Height
8.18 Hours On After Shutdown
8.19 QuickStart
8.20 Serial Port Tab
8.21 Baud Rate and Output Rate
8.22 NMEA Messages
8.23 StarFire? 6000?Main
8.24 Receiver Position Mode
8.25 Machine Location and Speed
8.26 Receiver Accuracy Indicator
8.27 Receiver Position Accuracy
8.28 Receiver Signal Quality
8.29 Receiver Terrain Compensation Module
8.30 Satellite Information
8.31 Satellite Tracking Information
8.32 Sky Plot Tab
8.33 Reading Satellite Sky Plot
8.34 Satellite Tracking Chart
8.35 Graph Tab
8.36 Graph
8.37 Global Positioning System (GPS) Accuracy Indicator
8.38 StarFire? File Manager
8.39 Capture Data
8.40 Manage Data
8.41 Update Receiver
8.42 Hardware Failure
8.43 Diagnostics
8.44 Diagnostic Readings Tab
8.45 Diagnostic Data Logs Tab
8.46 Diagnostic Over-the-Air Tab
8.47 StarFire? 6000 ? USB Drive Options
8.48 USB Drive Best Practices
8.49 USB Drive Options
8.50 USB Drive Requirements
8.51 Access GreenStar? 2 Display and GreenStar? 3 Display Diagnostics
8.52 Access Generation 4 CommandCenter? Diagnostics
8.53 GreenStar? 2 and 3 Displays?Diagnostic Information
8.54 StarFire? 6000 LED Status
8.55 LICENSE AGREEMENT FOR JOHN DEERE STARFIRE? SATELLITE RECEIVER SOFTWARE
9 GreenStar? Forage Harvester (If Equipped)
9.1 Read Me First
9.2 HarvestLab? Sensor
9.3 Control Unit
9.4 Integrated Printer (Option)
9.5 Setup Integrated Printer (Option)
9.6 Setup Inoculant Dosing Device (Option)
9.7 GreenStar? Forage Harvester?Mapping
9.8 GreenStar? Forage Harvester?Totals View
9.9 GreenStar? Forage Harvester?Documentation
9.10 HarvestLab??Main Screen
9.11 HarvestLab??Diagnostics Screen
9.12 Replace HarvestLab? 3000 Sensor Adapter Glass
9.13 After the First 50 Operating Hours
9.14 Once a Year
9.15 As Required?Change Printer Paper Roll
9.16 As Required?Change Printer Ink Ribbon
9.17 Warning Screens?Diagnostic Trouble Codes
9.18 HarvestLab? Sensor
9.19 Identification Labels
9.20 2630 Display Serial Number
9.21 HarvestLab? Sensor (Version 1.4) Serial Number
9.22 HarvestLab? 3000 Sensor Serial Number
9.23 Control Unit Serial Number
9.24 Printer Serial Number (Option)
10 JDLink? (If Equipped)
10.1 ZXLink?
10.2 Modular Telematics Gateway Theory of Operation
10.3 Customer Owned SIM
10.4 Satellite Module Theory of Operation
10.5 Data Collection
10.6 JDLink? Functions
10.7 Satellite Module Service Level
10.8 Mobile to Machine
10.9 Components
10.10 Modular Telematics Gateway
10.11 Cellular, GPS, and Wireless Antenna
10.12 Wireless Antenna
10.13 Satellite Module and Antenna
10.14 Ethernet Switch
10.15 Ethernet Switch Operating Voltage
10.16 Website Login
10.17 Getting Started
10.18 Website Navigation
10.19 Overview
10.20 Vehicle Reprogramming
10.21 Troubleshooting ? Reprogramming
10.22 SOFTWARE TERMS AND CONDITIONS
10.23 END USER LICENSE AGREEMENT (EULA)
10.24 Electrical Specifications
11 GreenStar Applications GS3 CommandCenter? Display (If Equipped)
11.1 Read This Manual
11.2 GreenStar Basic Information
11.3 Manual Guidance
11.4 On-Screen Mapping
11.5 Boundaries
11.6 AutoTrac
11.7 License Agreement
11.8 Activating GreenStar Applications
11.9 Managing Activations
11.10 Locking GreenStar Functions
11.11 GreenStar Main Page
11.12 Setup Wizard
11.13 Basic Setup Mode
11.14 Standard Setup Mode
11.15 Machine
11.16 Implement
11.17 Recording Source
11.18 Field
11.19 Guidance Track
11.20 Repeating Guidance Track Setup
11.21 GreenStar Run Page
11.22 General GreenStar System Operations
11.23 Changing Fields
11.24 Creating a Boundary
11.25 Calculating Area
11.26 Coverage Mapping
11.27 Recording Coverage Maps
11.28 Clearing Coverage Maps
11.29 StarFire GPS Accuracy Indicator
11.30 Red Bar Graph
11.31 Orange Bar Graph
11.32 Green Bar Graph
11.33 Displaying GPS Accuracy on Coverage Map
11.34 Operating GreenStar System Guidance
11.35 Theory of Operation
11.36 Creating a New Straight Track
11.37 A+B, A+Auto B, and A+Heading Methods
11.38 Lat/Long and Lat/Long+Heading Methods
11.39 Guiding on a Straight Track
11.40 Theory of Operation
11.41 Creating a New AB Curve Track
11.42 Recording a Straight Path or Navigating Around Obstacles
11.43 Straight Line Extensions
11.44 Guiding on an AB Curve
11.45 Theory of Operation
11.46 Guidance Patterns
11.47 Creating a New Adaptive Curve Track
11.48 Recording a Straight Path or Navigating Around Obstacles
11.49 Guiding on a Previously Recorded Track
11.50 Shift Track
11.51 Guiding around Obstacles in Field
11.52 Theory of Operation
11.53 Creating a New Circle Track
11.54 Drive Circle Method
11.55 Lat / Long Method
11.56 Guiding on a Circle Track
11.57 Shift Track
11.58 Accuracy
11.59 Theory of Operation
11.60 Row Finder Operation
11.61 Turning On and Off
11.62 Clearing Guidance Tracks
11.63 Shift Track
11.64 Tracking Tones
11.65 Turning View
11.66 Turn Predictor
11.67 Guidance Settings
11.68 Lightbar Settings
11.69 Curve Track Settings
11.70 Data Management
11.71 Transferring Data
11.72 Backup Data to a USB storage device
11.73 Importing Data from a USB storage device
11.74 Importing Data from 3rd Party Software
11.75 View Amount Internal Memory Remaining
11.76 Removing Data from the Internal Memory
11.77 Clearing Guidance Tracks
11.78 Data Cleanup
11.79 Guidance Alarms
11.80 Message Center
11.81 Reprogramming Error Codes
11.82 Alarm Screens
11.83 Diagnostic Addresses
11.84 Trouble Code Pop-Up Boxes?Platform Core Software
11.85 Trouble Code Pop-Up Boxes?Documentation Software
11.86 GreenStar Diagnostics
11.87 Troubleshooting And Diagnostics
12 AutoTrac? RowSense? (If Equipped)
12.1 Overview
12.2 AutoTrac? RowSense? Guidance
12.3 GreenStar Settings Page
12.4 GreenStar Guidance Page
12.5 GreenStar Machine/Implement Pages
12.6 Enable/Activate/Operate AutoTrac? RowSense?
12.7 Calibrate The Row Sensor
12.8 Clean Row Sensor
13 John Deere Service Keeps You on the Job
13.1 John Deere Parts
13.2 The Right Tools
13.3 Well-Trained Technicians
13.4 Prompt Service
