Table of Content:
1 Introduction
1.1 Foreword
1.2 Emissions Performance and Tampering
1.3 Notifications to User
1.4 FCC Notifications to User
1.5 Symbol Definitions
2 Safety Features
2.1 Cotton Stripper Safety Features
3 Safety
3.1 Recognize Safety Information
3.2 Understand Signal Words
3.3 Follow Safety Instructions
3.4 Spanish Safety Signs and Operator’s Manual
3.5 Replace Safety Signs
3.6 Prepare for Emergencies
3.7 Wear Protective Clothing
3.8 Protect Against Noise
3.9 Use Handholds And Steps
3.10 Keep Riders and Children Off Machine
3.11 Parking and Leaving the Machine
3.12 Instructional Seat
3.13 Use Seat Belts
3.14 Operate Safely
3.15 Operate Cleaner Safely
3.16 Transport Safely
3.17 Use Safety Lights and Devices
3.18 Avoid Electrical Power Lines
3.19 Avoid Backover Accidents
3.20 Avoid Tip-Overs
3.21 Emergency Exit (Right-Hand Cab Window)
3.22 Fire Prevention
3.23 In the Case of Fire
3.24 Fire Extinguishers
3.25 Water Type Fire Extinguisher Location
3.26 Water Fire Extinguisher?Charging
3.27 Dry Chemical Fire Extinguisher Location
3.28 Auxiliary Water System
3.29 Practice Safe Service and Maintenance
3.30 Operate Module Builder Gate and Handler Cylinder Locks
3.31 Avoid Contact with Moving Parts
3.32 Avoid Entanglement
3.33 Stay Clear Of Rotating Drivelines
3.34 Prevent Machine Runaway
3.35 Install All Guards
3.36 Support Machine Properly
3.37 Use Proper Lifting Equipment
3.38 Avoid Static Electricity Risk When Refueling
3.39 Handle Fuel Safely?Avoid Fires
3.40 Handle Starting Fluid Safely
3.41 Handle Chemical Products Safely
3.42 Refilling Diesel Exhaust Fluid (DEF) Tank
3.43 Decommissioning ? Proper Recycling and Disposal of Fluids and Components
3.44 Avoid Hot Exhaust
3.45 Handling Batteries Safely
3.46 Work In Ventilated Area
3.47 Carbon Dioxide Emissions (CO?)
3.48 Clean Exhaust Filter Safely
3.49 Remove Paint Before Welding or Heating
3.50 Welding Near Electronic Control Units
3.51 Avoid Heating Near Pressurized Fluid Lines
3.52 Avoid High-Pressure Fluids
3.53 Service Accumulator Systems Safely
3.54 Protect Against High Pressure Spray
3.55 Service Drive Belts Safely
3.56 Service Cooling System Safely
3.57 Service Tires Safely
3.58 Tightening Wheel Retaining Bolts/Nuts
3.59 Handle Electronic Components and Brackets Safely
3.60 Avoid Exposure to High Radio Frequency Fields
3.61 Use Proper Tools
3.62 Using Compressed Air For Cleaning
4 Safety Signs
4.1 Avoid Electrical Power Lines Decal
4.2 Use Seat Belts Decal
4.3 Use Park Brake Decal
4.4 Emergency Exit Decal
4.5 In Case of Fire Decal
4.6 Prevent Fires Decals
4.7 Prevent Flammable Liquid Fire
4.8 Hot Exhaust Decal
4.9 Keep Shields in Place Decal
4.10 Hydraulic Cylinder Safety Stops Decal
4.11 Accumulator Safety Stop Decal
4.12 Hydraulic Accumulator Safety Decal
4.13 Cleaner Safety Decal
4.14 Trash Chute Safety Decal
4.15 Fan Shield Decal
4.16 Pressurized Cooling System Decal
4.17 Bypass Start Decal
4.18 Do Not Ride Decal
4.19 Handler Lock Decal
4.20 Gate Lock Decal
4.21 Crush Hazard Decal
4.22 Wrap Feed Decal
4.23 Roll Crush Decal
4.24 Wrap Rolls Decal
4.25 Entanglement Danger Decal
4.26 Do Not Stand Decal
4.27 Do Not Step Decal
4.28 Avoid Contact Decal
4.29 Header Keep Shields in Place
4.30 Rotating Drive Line Decal
5 Operator’s Station
5.1 General View of Controls and Indicators
5.2 Armrest Console Controls
5.3 Multi-function Lever Palm Rest Adjustment
5.4 Header Stop/Accumulator Unload Button
5.5 Header Height Resume Buttons
5.6 Camera View Button
5.7 Header and Row Units Raise-Lower Button
5.8 Auto Mode Engage-Disengage Button
5.9 Handler Raise-Lower Switch
5.10 Row Guidance System Engage Button
5.11 Guidance System Enable Button
5.12 Row Guidance Offset Adjustment Dial
5.13 Fan and Cleaner Switch
5.14 Header Drive Switch
5.15 Header Height Control Response Rate Dial
5.16 Row Unit Height Adjust Buttons
5.17 Wrap Request Button
5.18 Saw Drum Cleaning System Flush Button
5.19 Engine Speed Buttons
5.20 ProDrive? Transmission Controls
5.21 Park Brake Button
5.22 Differential Lock Button
5.23 Header Float Button
5.24 Anti-Slip Regulation Button
5.25 Operator Interface Controls
5.26 Accessory Power Outlet (12 V DC)
5.27 Armrest Console Quick Reference Instructions
5.28 Corner Post Display
5.29 Lighting Control Panel
5.30 Windshield Wiper Switch
5.31 Light Switches
5.32 Hazard Lights
5.33 Road Lights
5.34 Field Lights
5.35 Work Lights
5.36 Cab Interior Light
5.37 Heating and Air Conditioning Control Panel
5.38 Cab Temperature Control System
5.39 Radio with CD Player
5.40 Turn Radio On and Off
5.41 Adjust Brightness of the Radio Illumination (ILLUM)
5.42 Adjust Volume
5.43 Mute the Sound (MUTE)
5.44 Turn Confirmation Beep On-Off (BEEP)
5.45 Adjust Maximum Volume at Power-On (ONVOL)
5.46 Adjust Sound
5.47 Adjust Left-Right Volume Distribution (BAL)
5.48 Adjust Front-Rear Volume Distribution (FAD)
5.49 Turn Loudness On-Off (LD)
5.50 Restore Sound Settings
5.51 Station Name
5.52 Start Radio Mode
5.53 Turn RDS Comfort Functions On-Off
5.54 Select Wave Band and Memory Level
5.55 Tune to a Station
5.56 Store Station in Memory Preset
5.57 Select Station from Memory Preset
5.58 Scan Preset Stations
5.59 Scan Receivable Stations
5.60 Set Program Type
5.61 Treble Reduction During Interference
5.62 Set Key Function
5.63 Use of CDs (General Information)
5.64 Start CD Mode
5.65 Eject CD
5.66 Operating Tips About Your Audio System
5.67 Antenna
5.68 Video Camera Observation System
5.69 Steering Column
5.70 Turn Signals
5.71 Steering Wheel Tilt and Height Adjustment
5.72 Key Switch
5.73 Travel Brake Pedals
5.74 Operator’s Seat Adjustment
5.75 Left-Hand Armrest and Seat Back Adjustment
5.76 Right-Hand Armrest and Control Console Adjustment (Rotating Cam System)
5.77 Right-Hand Armrest and Control Console Adjustment (Slide Adjust System)
5.78 Seat Belts
5.79 Auxiliary Power Outlet Strip and Diagnostic Connector
5.80 Rear View Mirrors
5.81 Emergency Exit
6 CommandCenter? Display Screens
6.1 Operator Interface System
6.2 Display Screen Layout
6.3 CommandCenter? Display Navigation
6.4 Display Screen?Data Area
6.5 Display Screen?Menu Area
6.6 Display Screen?Main Work Area
6.7 Diagnostic Trouble Codes at Start-up
6.8 Home Page Screens
6.9 Harvest Information Screen
6.10 Machine Configuration Screens
6.11 Daily Service Mode Screen
6.12 Engine Information Screen
6.13 Diagnostics and Calibration Screens
6.14 Active Alarms Screen
6.15 Diagnostic Readings Screens
6.16 Calibration Screens
6.17 Calibration Guidelines
6.18 Transmission Tow Mode Setup Screen
6.19 Transport Mode Screen
6.20 Round Module Builder (RMB) Service Mode Screens
6.21 Display Controls Screen
6.22 Main Application Menu Screen
6.23 Remote Software Update Application
6.24 Message Center Application
6.25 Performance Monitor Application
6.26 Display Settings Application
6.27 Layout Manager Application
6.28 Access Manager Application
7 Harvest Identification, Cotton Pro
7.1 Theory of Operation
7.2 Harvest Identification, Cotton Pro System Components
7.3 Set Up Harvest Identification, Cotton Pro on Home Page
7.4 Harvest Identification, Cotton Pro Gin/Producer Page Setup
7.5 Harvest Identification, Cotton Pro Files Page Setup
7.6 Harvest Identification, Cotton Pro Options Page Setup
7.7 Harvest Identification, Cotton Pro Counters Page
7.8 Harvest Identification, Cotton Pro Run Page
8 Operating the Machine
8.1 Operate Safely
8.2 Starting Engine
8.3 Starting Engine in Cold Weather
8.4 Changing Starting Fluid Can
8.5 Cold Weather Operation
8.6 Warming Engine
8.7 Idling Engine
8.8 Stopping Engine
8.9 Required Machine Stop Warning
8.10 Selective Catalytic Reduction (SCR) System Overview
8.11 Exhaust Filter System Overview
8.12 When to Disable Exhaust Filter Cleaning System
8.13 Automatic (AUTO) Exhaust Filter Cleaning Mode
8.14 Parked Exhaust Filter Cleaning
8.15 Aftertreatment Indicators Overview
8.16 EU Qualified Emergency Use ? SCR Derate Override Option
8.17 Preparing to Drive Machine
8.18 Driving Machine
8.19 Driving Machine on Public Roads
8.20 Harvesting in Auto Mode
8.21 Unload Cotton from Machine
8.22 Stopping Machine
8.23 Parking Machine
8.24 Positioning Machine for Transport
8.25 Positioning Machine for Harvest
8.26 Towing Machine (Engine Operational)
8.27 Freeing Mired Machine
9 Operator Presence System
9.1 Operator Presence System
9.2 Operator Presence System Check
10 Row Guidance System
10.1 Row Guidance System Information
10.2 Manual RowSense? Guidance System
10.3 AutoTrac? Guidance System Information
10.4 AutoTrac? RowSense? Guidance System Information
10.5 Guidance Mode Setup
10.6 Row Guidance System Operation
10.7 Advanced Row Guidance Settings
10.8 Guidance System Calibration
11 Header Height Control
11.1 Header Height Control Theory Of Operation
11.2 Header Height Control Operation and Adjustment
11.3 Header Height Control Response Rate Adjustment
11.4 Adjusting Height Sensing Shoes
12 Stripper Header
12.1 Stripper Header Drive Theory of Operation
12.2 Attach and Detach Stripper Header
12.3 Remove Unit Shields?Front
12.4 Remove Unit Shields?Rear
12.5 Set Strip Roll Timing
12.6 Adjust Row Unit Cross Auger Sensor
12.7 Adjust Strip Roll Separation and Boll Shields
12.8 Adjust Gatherer Grates
12.9 Adjust Cut-Off Angles
12.10 Adjust Strip Roll Comb Guides
12.11 Level Header
12.12 Replace Strip Roll Bats and Brushes
12.13 Install Header Drive Assembly
12.14 Replace Header Drive Belts
12.15 Change Row Spacing
12.16 Remove Header Center Bearing Support (If Necessary)
12.17 Skip Row Wiring Diagram
12.18 Install Cross Auger Extensions
12.19 Install Filler Support Bracket and Covers
12.20 Row Unit Spacing
12.21 Row Unit Spacing Diagram
12.22 Lateral Tilt Frame (If Equipped)
13 Air System
13.1 Key Air System Characteristics
13.2 Air System Theory of Operation
13.3 Inspect and Adjust Cotton Fan Belts
13.4 Separation Duct Settings
13.5 Nozzle Tab Setting
13.6 Clearing Plugged Air System
14 Cleaner
14.1 Cleaner Drive and Control Theory of Operation
14.2 Understanding Cleaner Operation
14.3 Fabricating Spacing Tool
14.4 Set Cleaner Grid Bar Spacing
14.5 Access Cleaner Doffer and Fan
14.6 Clearing Cleaner Plug
14.7 Replace Secondary Reclamation Brush
14.8 Replace Saw Brush
14.9 Saw Drum Blade Replacement
14.10 Set Grid Bar and Feed Control Channel Spacing
14.11 Replace Cleaner Doffer Brush
14.12 Remove Cleaner Belts
14.13 Cleaner Belt Chart
14.14 Adjust Cleaner Belt Tension
15 Saw Drum Cleaning System
15.1 Auxiliary Water System
15.2 Saw Drum Cleaning System Theory of Operation
15.3 Saw Drum Cleaning System Component Location
15.4 Use John Deere Spindle Cleaner
15.5 Spindle Cleaner Storage
15.6 Cold Weather Operation
15.7 Fill Saw Drum Cleaning System Solution Tank
15.8 Operate Saw Drum Cleaning System Flush
15.9 Clean Solution Strainer
16 Round Module Builder
16.1 Theory of Operation
16.2 Belt Routing and Roller Diagram
16.3 Measure and Change Module Diameter
16.4 Check Lower Feeder Belt Tracking
16.5 Adjust Lower Feeder Belt Tension
16.6 Clearing a Plugged Cotton Handling System
16.7 Check Module Builder Forming Belts and Pins
16.8 Inspect and Adjust Module Forming Belt Tracking
16.9 Adjust Rotary Brush
16.10 Replace Rotary Brush Drive Belt and Adjust Tension
16.11 Replace Module Builder Belts
16.12 Repair Module Builder Forming Belts
16.13 Load Module Builder Wrap
16.14 Remove and Replace Empty Wrap Rolls
16.15 Check and Adjust Wrap Feeder and Wrap Floor Belt Tension
16.16 Adjust Wrap Load Arms
16.17 Bleed Accumulator Extension Lift Cylinders
17 Transport Ballast Attachment
17.1 Transport Ballast Attachment
18 Electrical System Service
18.1 Battery Disconnect Switch
18.2 Auxiliary Power Terminals
18.3 Fuse Identification
18.4 Cab Fuse Block
18.5 Rear Terminal Power Supply Fuses
18.6 Replacement Fuses
18.7 Replacement Bulbs
18.8 Safety Rules for Halogen Bulb Replacement
18.9 Halogen Road Light Bulb Replacement
18.10 Adjust Halogen Cab Road Headlights
18.11 LED Field Light Replacement
18.12 LED Field Light Adjustment
18.13 Replace Light Bar Field Lights
18.14 Replace Module Builder and Handler Work Lights
18.15 Beacon Light Bulb Replacement
18.16 Front Hazard Light Bulb Replacement
18.17 Tail and Stop Light Bulb Replacement
18.18 Rear Turn Signal and Hazard Light Bulb Replacement
18.19 Turn Signal Indicator Bulb Replacement
18.20 Dome Light Bulb Replacement
18.21 Check and Adjust Cotton Handling System Speed Sensors
18.22 Handling Batteries Safely
18.23 Preventing Battery Damage
18.24 Servicing Batteries
18.25 Charging Batteries
18.26 Using a Booster Battery
18.27 Remove and Install Batteries
19 Cab and Air Conditioning
19.1 Observe Air Conditioning Precautions
19.2 Heating and Air Conditioning System (General Information)
19.3 Removing Cab Recirculating Air Filter
19.4 Removing and Cleaning Cab Fresh Air Filter
19.5 Cleaning Cab Roof Air Inlet Screen
19.6 Removing and Cleaning Roof Air Inlet Panel
19.7 Cleaning Cab Filters
20 Engine and Drive Train
20.1 Engine Accessory Belt Routing (Tier 4/Stage IV)
20.2 Replace Engine Accessory Drive Belt
20.3 Auxiliary Fan Theory of Operation
20.4 Replace Rotary Screen Drive Belts
20.5 Rotary Screen Belt Routing
20.6 Remove and Clean Fuel Strainer
20.7 Drain Primary Fuel Filter Water Separator
20.8 Replace Primary and Secondary Fuel Filter Elements
20.9 Remove and Replace Air Cleaner Elements
20.10 Inspecting Element
20.11 Drain and Flush Diesel Exhaust Fluid (DEF) Tank
20.12 Diesel Particulate Filter Maintenance and Service
20.13 Exhaust Filter Ash Handling and Disposal
20.14 Exhaust Filter Disposal
20.15 Replace Diesel Exhaust Fluid (DEF) Dosing Filter
20.16 Remove and Install Vari-Cool? Drive Fan Belt
20.17 Checking and Adding Coolant
20.18 Flushing Cooling System
20.19 Filling Cooling System
20.20 Winterizing Cooling System
20.21 Cleaning Radiator, Cooler Cores, and Rotary Screen
20.22 Do Not Modify Fuel System
21 Wheels and Tires
21.1 Service Tires Safely
21.2 Discarded Tires
21.3 Checking Tires
21.4 Jacking up Front Axle
21.5 Jacking up Rear Axle
21.6 Adjusting Mud Scrapers (If Equipped)
21.7 Checking Guide Wheel Toe-In
21.8 Adjusting Guide Wheel Toe-In
21.9 Drive Axle Diagrams
21.10 762 mm (30 in.)?With 50 mm (2 in.) Wheel Spacer
21.11 914 mm (36 in.)?With 50 mm (2 in.) Wheel Spacer
21.12 965 mm (38 in.)?With 50 mm (2 in.) Wheel Spacer
21.13 965 mm (38 in.)?With 203 mm (8 in.) Wheel Spacer
21.14 1016 mm (40 in.)?With 50 mm (2 in.) Wheel Spacer
21.15 1016 mm (40 in.)?With 203 mm (8 in.) Wheel Spacer
21.16 Change Drive Wheel Spacing
21.17 Check Guide Axle Wheel Spacing
21.18 Change Guide Axle Wheel Spacing
22 Fuels, Lubricants, and Coolants
22.1 Handle Fuel Safely?Avoid Fires
22.2 Avoid Static Electricity Risk When Refueling
22.3 Fuel Tank?Filling
22.4 Handling and Storing Diesel Fuel
22.5 Diesel Fuel
22.6 Lubricity of Diesel Fuel
22.7 Supplemental Diesel Fuel Additives
22.8 Minimizing the Effect of Cold Weather on Diesel Engines
22.9 Biodiesel Fuel
22.10 Diesel Exhaust Fluid (DEF) ? Use in Selective Catalytic Reduction (SCR) Equipped Engines
22.11 Storing Diesel Exhaust Fluid (DEF)
22.12 Testing Diesel Exhaust Fluid (DEF)
22.13 Refilling Diesel Exhaust Fluid (DEF) Tank
22.14 Disposal of Diesel Exhaust Fluid (DEF)
22.15 Changing Diesel Exhaust Fluid (DEF) Dosing Unit Filter
22.16 Cleaning Diesel Exhaust Fluid (DEF) Tank
22.17 Diesel Particulate Filter (DPF) Service?As Required
22.18 Replace Diesel Particulate Filter (DPF)?As Required
22.19 John Deere Break-In? Plus Engine Oil
22.20 Diesel Engine Oil
22.21 Engine Oil and Filter Service Intervals
22.22 Oilscan? and CoolScan?
22.23 Hydraulic, Hydrostatic, and Transmission Oils
22.24 Final Drive and Powered Rear Axle Lubricant
22.25 Diesel Engine Coolant (engine with wet sleeve cylinder liners)
22.26 John Deere COOL-GARD? II Coolant Extender
22.27 Water Quality for Mixing with Coolant Concentrate
22.28 Testing Coolant Freeze Point
22.29 Operating in Warm Temperature Climates
22.30 Multipurpose Extreme Pressure (EP) Grease
22.31 Alternative and Synthetic Lubricants
22.32 Lubricant Storage
23 Prestarting Checks
23.1 Check Fire Extinguishers
23.2 Check Engine Oil Level
23.3 Check Engine Coolant Level
23.4 Check Transmission Oil Level
23.5 Check Pump Drive Gearbox Oil Level
23.6 Check Hydraulic and Hydrostatic Oil Level
23.7 Check Auxiliary Water Tank Level
23.8 Avoid Static Electricity Risk When Refueling
23.9 Fill Fuel Tank
23.10 Fill Diesel Exhaust Fluid (DEF) Tank (Tier 4/Stage IV)
23.11 Inspect Tires and Check Pressures
23.12 Clean Windows, Mirrors, and Lights
24 Break-In Service
24.1 Breaking-in Engine
24.2 After 1 Hour
24.3 After 5 Hours
24.4 After 10 Hours
24.5 After 20 Hours
24.6 Between 100 and 375 Hours
25 Lubrication and Maintenance
25.1 Required Emission-Related Information
25.2 Replace Diesel Exhaust Fluid (DEF) Tank Header Suction Screen
25.3 Changing Diesel Exhaust Fluid (DEF) Dosing Unit Filter
25.4 Cleaning Diesel Exhaust Fluid (DEF) Tank
25.5 Decommissioning ? Proper Recycling and Disposal of Fluids and Components
25.6 Using High-Pressure Washers
25.7 Set Service Alarm Intervals
25.8 Service Interval Chart
25.9 Clean Machine Thoroughly
25.10 Adjust Access Panel Latches
25.11 Every Wrap Roll Change
25.12 Every 6 Hours of Operation
25.13 Every 12 Hours of Operation
25.14 Every 50 Hours of Operation
25.15 Every 100 Hours of Operation
25.16 Every 250 Hours of Operation
25.17 Every 400 Hours of Operation or Annually
25.18 Every 1000 Hours of Operation
25.19 Every 1500 Hours of Operation
25.20 Every 2000 Hours of Operation
25.21 Every 6000 Hours of Operation
26 Troubleshooting
26.1 General Information
26.2 Round Module Builder
26.3 Air System
26.4 Stripping Units
26.5 Header Height Control
26.6 RowSense
26.7 Cleaner
26.8 Hydrostatic Drive System
26.9 ProDrive? Transmission
26.10 Steering
26.11 Operator Presence System and Inspection Bypass System
26.12 Engine
26.13 Electrical System
26.14 Operator’s Station
27 Transporting the Machine
27.1 Positioning Machine for Truck Transport
28 Storage
28.1 Prepare Machine for Storage
28.2 Preparing Engine for Storage
28.3 Preparing Engine for Long-Term Storage
28.4 Removing Machine from Storage
29 Torque Charts
29.1 Metric Bolt and Screw Torque Values
29.2 Unified Inch Bolt and Screw Torque Values
29.3 High Pressure Face Seal Torque Chart
29.4 Service Recommendations For Flat Face O-Ring Seal Fittings
30 Specifications
30.1 Machine Specifications
30.2 Filter Location and Part Numbers
30.3 Machine Dimensions
30.4 Sound Level
30.5 Whole Body Vibration
30.6 Hand and Arm Vibration
30.7 Product Identification and Component Serial Numbers
30.8 Keep Machines Secure
30.9 Keep Proof of Ownership
30.10 Limited Battery Warranty
31 John Deere Service Keeps You on the Job
31.1 John Deere Parts
31.2 The Right Tools
31.3 Well-Trained Technicians
31.4 Prompt Service
