Table of Content:
1 Introduction
1.1 Foreword
1.2 Emissions Performance and Tampering
1.3 Look For Supplemental Information
1.4 Trademarks
1.5 Traction Class
2 Glossary
2.1 Glossary of Terms
3 Safety
3.1 Recognize Safety Information
3.2 Understand Signal Words
3.3 Follow Safety Instructions
3.4 Prepare for Emergencies
3.5 Wear Protective Clothing
3.6 Protect Against Noise
3.7 Handle Fuel Safely?Avoid Fires
3.8 Handle Starting Fluid Safely
3.9 Fire Prevention
3.10 In Case of Fire
3.11 Avoid Static Electricity Risk When Refueling
3.12 Keep ROPS Installed Properly
3.13 Use Foldable ROPS and Seat Belt Properly
3.14 Stay Clear of Rotating Drivelines
3.15 Use Steps and Handholds Correctly
3.16 Read Operator?s Manuals for ISOBUS Controllers
3.17 Use Seat Belt Properly
3.18 Operating the Tractor Safely
3.19 Avoid Backover Accidents
3.20 Limited Use in Forestry Operation
3.21 Operating the Loader Tractor Safely
3.22 Keep Riders Off Machine
3.23 Instructional Seat
3.24 Use Safety Lights and Devices
3.25 Transport Towed Equipment at Safe Speeds
3.26 Use Caution on Slopes, Uneven Terrain, and Rough Ground
3.27 Freeing a Mired Machine
3.28 Avoid Contact with Agricultural Chemicals
3.29 Handle Agricultural Chemicals Safely
3.30 Handling Batteries Safely
3.31 Avoid Heating Near Pressurized Fluid Lines
3.32 Remove Paint Before Welding or Heating
3.33 Handle Electronic Components and Brackets Safely
3.34 Practice Safe Maintenance
3.35 Avoid Hot Exhaust
3.36 Clean Exhaust Filter Safely
3.37 Work In Ventilated Area
3.38 Support Machine Properly
3.39 Prevent Machine Runaway
3.40 Park Machine Safely
3.41 Transport Tractor Safely
3.42 Service Cooling System Safely
3.43 Service Accumulator Systems Safely
3.44 Service Tires Safely
3.45 Service Front-Wheel Drive Tractor Safely
3.46 Tightening Wheel Retaining Bolts/Nuts
3.47 Avoid High-Pressure Fluids
3.48 Do Not Open High-Pressure Fuel System
3.49 Store Attachments Safely
3.50 Decommissioning ? Proper Recycling and Disposal of Fluids and Components
4 Safety Signs
4.1 Operator’s Manual
4.2 Seat Belt
4.3 Hinge Area
4.4 Park Brake (Stored Energy)
4.5 Track Accumulators
4.6 Rear Hitch (If Equipped for China Only) [Ag]
4.7 Engine Cooling System (For China Only)
4.8 Rear PTO (If Equipped for China Only) [Ag]
5 Vehicle Overview
5.1 9RX Series Tractor
6 Engine Operation
6.1 Required Machine Stop Warning
6.2 Engine Fuel System and Power Rating
6.3 Battery Disconnect Switch
6.4 Start the Engine
6.5 Theft Deterrent Systems
6.6 Run the Engine
6.7 Stop the Engine
6.8 Restart Engine That Has Run Out of Fuel
6.9 Reduce Fuel Consumption
6.10 Battery Booster or Charger
7 Cold Weather Operation
7.1 Cold Weather Starting?With Starting Aid
7.2 Cold Weather Starting And Operation?Internal Starting Aid
7.3 Change Starting Fluid Canister
7.4 Engine Coolant Heater Use?13.5 L or 15 L Engines
8 Emissions Equipment
8.1 Exhaust Filter System Overview?Final Tier 4/Stage V Engine
8.2 Aftertreatment Indicators Overview
8.3 Selective Catalytic Reduction (SCR) System Overview
8.4 Auto Exhaust Filter Cleaning Mode?Final Tier 4/Stage V Engine
8.5 Parked Exhaust Filter Cleaning?Final Tier 4/Stage V Engine
8.6 Selective Catalytic Reduction (SCR) System?Final Tier 4/Stage V Engine
8.7 Low Fuel or Low DEF Warning
8.8 Disconnect Battery?Final Tier 4/Stage V Engine
9 Controls and Instruments
9.1 Front Console
9.2 CommandARM? ISOBUS Shortcut Button (ISB)
9.3 Foot Decelerator
10 Corner Post Display
10.1 Corner Post Display
10.2 Information Indicators
10.3 Warning Indicators
10.4 Digital Indicators?Tachometer, Ground Speed, and Transmission
10.5 Gauges?Coolant Temperature, DEF Level, and Fuel Level
11 CommandARM? Controls
11.1 CommandARM? with Generation 4 CommandCenter? Display
11.2 CommandARM? Secondary Brake Lever
11.3 CommandARM? Hitch Controls [Ag]
11.4 CommandARM? SCV Control Levers
11.5 CommandARM? Climate, Radio and Lighting Controls
11.6 CommandARM? PTO Control Lever [Ag]
11.7 CommandARM? Left-Hand Side Controls
12 CommandCenter?
12.1 Rear Hitch or PTO Availability
12.2 Onscreen Help
12.3 Generation 4 CommandCenter?
12.4 Generation 4 CommandCenter? Processor
12.5 Generation 4 CommandCenter? 4600 Processor Wi-Fi? Capabilities
12.6 Run Page Structure
12.7 Menu
12.8 Machine Settings Overview
12.9 Operating System Applications Overview
12.10 AMS Applications Overview
12.11 CommandCenter? Activations
12.12 Demo Activations
12.13 Automation Status Overview
12.14 Navigate Generation 4 CommandCenter?
12.15 Power Display On and Off
12.16 Navigate Run Pages on Main Page
12.17 Shortcut Buttons
12.18 Display and Sound
12.19 Brightness
12.20 Sound
12.21 Multiple Displays
12.22 Display Calibration
12.23 Date and Time
12.24 Change Current Date
12.25 Change Current Time
12.26 Language and Units
12.27 Language and Units Settings
12.28 Change Pages and Values
12.29 Status Center
12.30 Shortcut Softkeys
12.31 Software Manager
12.32 Factory and Service ADVISOR? Installed Onscreen Help
12.33 Update Display Software
12.34 Activations
12.35 Service ADVISOR? Remote
12.36 Vehicle Reprogramming
12.37 Troubleshooting ? Reprogramming
12.38 System Recovery
12.39 Remote Display Access
12.40 File Manager
12.41 USB Drive
12.42 Capture Screen Shots
12.43 Diagnostics Center
12.44 Controller Diagnostics
12.45 Diagnostic Information
12.46 Hide Diagnostic Center
12.47 Diagnostic Trouble Codes
12.48 Display Hardware
12.49 CAN Bus Information
12.50 CAN Bus Values
12.51 Network
12.52 DataSync
12.53 Users and Access
12.54 User Profiles
12.55 Access Groups
12.56 Layout Manager
12.57 Active Set
12.58 Shortcut Bar
12.59 All Run Pages
12.60 Add, Edit, or Duplicate Run Pages
12.61 Fields and Boundaries
12.62 Field Boundaries
12.63 Manage Clients, Farms, and Fields
12.64 AutoTrac? Guidance
12.65 Equipment Manager
12.66 Machine Profile
12.67 Implement Profile
12.68 Machine Monitor
12.69 Work Monitor
12.70 Work Recording
12.71 Maintenance and Calibrations
12.72 Calibrations
12.73 Radar Calibration
12.74 Slip Calibration
12.75 Service Intervals
12.76 Steering
12.77 Steering Settings
12.78 Controls Setup
12.79 Settings Manager
12.80 Automation Status
12.81 ISOBUS VT
12.82 StarFire? GPS Receiver
12.83 Install Video Display Camera
12.84 Video
12.85 Video Triggers
13 CommandCenter? – Radio
13.1 Mexico Bluetooth? Information
13.2 External Sources
13.3 Select Radio Source with Generation 4 CommandCenter?
13.4 AM/FM Home Page
13.5 Premium Radio USB Home Page
13.6 Premium Radio Bluetooth? Home Page
13.7 Auxiliary Home Page
13.8 Pair Bluetooth? Device to Generation 4 CommandCenter?
13.9 Manage Paired Bluetooth? Devices
13.10 Phone Operation
13.11 Contact List
13.12 Recent Calls
13.13 Clear Favorites and Call History
14 Intelligent Total Equipment Control (iTEC?)
14.1 CommandARM? Control Functions
14.2 iTEC? Station Description
14.3 CommandCenter? Pages Descriptions and Functions
14.4 Status Area
14.5 All Sequence Page
14.6 Add New Sequence
14.7 Sequence Step Status
14.8 Edit or Remove Sequence
14.9 Sequence Sets Page
14.10 Perform Sequence
14.11 Recommendations (AutoLearn)
14.12 iTEC? Functions?Efficiency Manager?
15 Tractor-Implement Automation? (TIA?)
15.1 Tractor-Implement Automation? (TIA?)
15.2 Activate Tractor-Implement Automation? Equipment
15.3 Tractor-Implement Automation? ? Status Page
15.4 Operate Tractor-Implement Automation?
15.5 PTO Requirements [Ag]
15.6 SCV Requirements
15.7 Powershift Transmission Requirements
15.8 AutoTrac? Guidance Requirements
15.9 Rear Hitch Requirements [Ag]
15.10 Drive Strategy Requirements
16 Drivetrain
16.1 Drivetrain Overview
16.2 Differential Lock
16.3 Change Differential Lock Disengagement Steering Angle
16.4 Drivetrain Protection
17 Brakes
17.1 Brake Use
17.2 Trailer Brakes Regulation (EAEU-compliant Tractors Only)
17.3 Hydraulic Trailer Brakes
17.4 Hydraulic Trailer Brakes (If Equipped)
17.5 Engine Brake ? 15 L Engine (If Equipped)
17.6 Use Secondary Brake Lever
17.7 Foot Decelerator
18 Transmission – General Information
18.1 Warm-Up Transmission-Hydraulic System
18.2 Activate and Set Maximum Set Speed
18.3 Use Maximum Set Speed with Different Transmission Modes
18.4 Back Up Alarm
18.5 Back Up Alarm Setting
19 e18? Powershift Transmission
19.1 Operate the e18? Powershift Transmission
19.2 Shift e18? Transmission
19.3 Avoid Tractor Overspeed
19.4 Set Start Gears
19.5 CommandCenter? Transmission Main Page
19.6 Efficiency Manager? on the e18? Transmission
19.7 Efficiency Manager? on e18? Transmission in Manual Mode
19.8 e18? Custom Mode Settings
20 PTO [Ag], Hitch [Ag], and Drawbar
20.1 Scraper Tractor Drawbar [Scraper]
20.2 Attach PTO-Driven Implement [Ag]
21 PTO – General Information [Ag]
21.1 Stay Clear of Rotating Drivelines
21.2 PTO Settings?Access
21.3 PTO Settings
21.4 PTO Settings?Advanced
21.5 PTO Settings?Engagement Rate
21.6 PTO Settings?Rear PTO Cruise
21.7 PTO Settings?Auto Disengage
21.8 Operate PTOs
21.9 External PTO Switches (If Equipped)
22 Rear PTO [Ag]
22.1 Operating Instructions
22.2 Use PTO Master Shield (If Equipped)
22.3 PTO Engine Speed
23 Rear Hitch [Ag]
23.1 Hitch Capacities
23.2 Rear Hitch Settings?Access
23.3 Rear Hitch Settings
23.4 Rear Hitch Settings?Upper Limit
23.5 Rear Hitch Settings?Drop Rate
23.6 Rear Hitch Settings?Raise Rate
23.7 Rear Hitch Settings?Load Depth
23.8 Rear Hitch Settings?Slip Sensitivity
23.9 Rear Hitch Settings?Position
23.10 Rear Hitch Settings?Position Control
23.11 Rear Hitch Settings?Draft Control
23.12 Hitch Control Lever Adjustments
23.13 Hitch Depth Set Point
23.14 Float Operation
23.15 Hitch Components
23.16 Hitch External Switches
23.17 Manual Lowering
23.18 Sway Blocks
23.19 Attach Implement to Quick-Hitch
23.20 Adjust Implement Level
23.21 Lateral Float
23.22 Detach Implement From Quick-Hitch
23.23 Hitch Conversion ? Category 4/4N Convertible Quick-Hitch
23.24 Converting Category 4N/3 Convertible Quick-Hitch Lower Hooks
23.25 Converting Category 4N/3 Convertible Quick-Hitch Upper Hook
24 Drawbar [Ag]
24.1 Drawbar Load Limitations
24.2 Non-John Deere Scrapers Drawbar Load Limits
24.3 Selecting Drawbar Position
24.4 Adjusting Drawbar Side-to-Side
24.5 Install Clevis Assembly ? Category 4 Drawbar
24.6 Clevis Assembly Use ? Category 4 Drawbar
24.7 Install Clevis Assembly ? Category 5 Drawbar
24.8 Clevis Assembly Use ? Category 5 Drawbar
24.9 Use Correct Drawbar Pin ? Category 5 to 4
25 Drawbar [Scraper]
25.1 Install Drawbar or Quick-Attach in Short Drawbar Support
25.2 Short Scraper Drawbar Conversion
25.3 Tow Cable
26 Hydraulics – General Information
26.1 Hydraulic System Overview
27 Selective Control Valves
27.1 Configure SCV Modes
27.2 Configure SCV – Standard Mode
27.3 Activate Independent Mode
27.4 Configure SCV – Independent Mode
27.5 Configure SCV – Feature Mode
27.6 Flow Sharing
27.7 Total Rear SCV Flow
27.8 Six-Position SCV Control Levers
27.9 SCV Control Lever?Neutral Position
27.10 SCV Control Lever?Extend and Retract Position
27.11 SCV Control Lever?Extend Detent and Retract Detent Position
27.12 SCV Control Lever?Float Position
27.13 Operator Presence Sensor
27.14 Operate SCVs with CommandARM? Joystick (If Equipped)
27.15 CommandARM? Joystick (If Equipped) – Custom Setup
27.16 CommandARM? Joystick (If Equipped) – Layout and Joystick Lever Functions
27.17 SCV Lever and Joystick Flow Response Setting
27.18 SCV Flow Sharing Setting
28 Hydraulic Connections
28.1 Connecting Hydraulic Hoses?Rear of Tractor
28.2 Disconnecting Hydraulic Hoses?Rear of Tractor
28.3 Standard Hydraulic Component Identification [AG]
28.4 Standard Hydraulic Component Identification [Scraper]
28.5 High Flow Hydraulic Component Identification [AG]
28.6 High Flow Hydraulic Component Identification [Scraper]
28.7 Using Load-Sensing Hydraulic System?Power-Beyond
28.8 Examples Using Load-Sensing Hydraulic System?Power-Beyond
28.9 Using Hydraulic Spray Pumps [AG]
28.10 Implement Connection Example 1?Pressure Control Valve Applications (Grain Drills or Air Seeders with Constant Down-Pressure System)?Less Hitch?Standard Hydraulics [AG]
28.11 Implement Connection Example 2?Motor Application Using Motor Case Drain?Less Hitch?Standard Hydraulics [AG]
28.12 Implement Connection Example 3?Closed Center Valve, Pump at High Pressure?Less Hitch?Standard Hydraulics [AG]
28.13 Implement Connection Example 4?Planter with Vacuum Motor and Return Line to SCV Using Motor Return Tip?Less Hitch?Standard Hydraulics [AG]
28.14 Implement Connection Example 5?Planter with Vacuum Motor and Return Line to Motor Return?With Hitch?With Lift Assist?Standard Hydraulics [AG]
28.15 Implement Connection Example 6?Planter with Vacuum Motor and Return Line to Motor Return?With Hitch?Implement Lift Assist?Standard Hydraulics [AG]
28.16 Connecting Implements to High Flow Hydraulic SCV’s [AG]
28.17 Connecting Implements to Air Seeder Special High-Flow Hydraulic SCVs [AG]
28.18 Implement Connection Example 1?Implement Control Valves?Less Hitch?High Flow Hydraulics [AG]
28.19 Implement Connection Example 2?Pressure Control Valve Applications (Grain Drills or Air Seeders with Constant Down-Pressure System)?Less Hitch?High Flow Hydraulics [AG]
28.20 Implement Connection Example 3?Closed Center Valve, Pump at High Pressure?Less Hitch?High Flow Hydraulics [AG]
28.21 Implement Connection Example 4?Planter with Vacuum Motor and Return Line to SCV Using Motor Return Tip?With Hitch?High Flow Hydraulics [AG]
28.22 Scraper Connection Example: Pulling 1, 2, and 3 Scrapers [Scraper]
28.23 Implements Requiring Large Volumes of Oil
28.24 Scraper Hydraulic Hose Tips [Scraper]
29 TouchSet? Depth Control
29.1 Attaching Implement and Control System
29.2 Reset Implement Connector
29.3 Set TouchSet? Depth Controls
29.4 Use TouchSet? Depth Controls
30 Laser Scraper Control [Ag]
30.1 Laser Scraper?for Scrapers Equipped with Scraper Control Unit
31 Scraper Information [Scraper]
31.1 Scraper Operation Cycle
31.2 Weight Transfer Limits
31.3 Scraper/Tractor Attachment
31.4 Loading Techniques
31.5 Connect AutoLoad? Harness
31.6 AutoLoad? Displays
31.7 Scraper Control Panel Reference
31.8 AutoLoad? Settings – Setting Auto Dimensions
31.9 Using AutoLoad?
31.10 Set Scraper ?Transport? Height
31.11 Set Scraper ?Ready? (Dump) Height
31.12 Set Scraper Ground ?Loading? Entering the Cut Height
31.13 AutoLoad? Operation
31.14 AutoLoad? Set Up Wizard
32 Tracks – General Information
32.1 General Track Use Guidelines
32.2 Tracks Service
33 Operator?s Station – General Information
33.1 Avoid Contact with Agricultural Chemicals
33.2 Clean Vehicle of Hazardous Pesticides
33.3 Keep Riders Off Machine
33.4 Keep Operator Station Window and Door Closed
33.5 Use Seat Belts
33.6 Use Emergency Exit
33.7 Monitor Bracket Mounts
34 Seat
34.1 Adjust ComfortCommand? Seat
34.2 Adjust Heated Leather Seat
34.3 Adjust CommandARM? Position
34.4 Operator Presence Sensor (If Equipped)
34.5 Adjust Instructional Seat
35 Steering Column
35.1 Adjust Steering Wheel and Column
35.2 Operate Horn
36 Mirrors
36.1 Manual Mirror
36.2 Electric Mirror
36.3 Telescoping Heated Electric Mirror
37 Wiper Washer
37.1 Operate Front Windshield Wiper and Washer
37.2 Operate Rear Wiper and Washer
37.3 Operate Right-Hand Wiper and Washer
38 Lights
38.1 Light Identification (Version A)
38.2 Light Identification (Version B)
38.3 Configurable Lights
38.4 Steering Column Light Controls (Version A)
38.5 Steering Column Light Controls (Version B)
38.6 Exit Lights
38.7 Operate Turn Signals and High/Low Beam
38.8 Safety Lights and Devices
38.9 CommandARM? Light Buttons
38.10 Hazard Lights and Extremity Warning Lights
38.11 Trailering Lights
38.12 Rotary Beacon Light
38.13 7-Pin Outlet (Equipped with Version A Lighting)
38.14 7-Pin Outlet (Equipped with Version B Lighting)
39 Accessories
39.1 Pull-Down Sunshade
39.2 Install Business Band or Citizens Band (CB) Radio and Antenna
39.3 Auxiliary Power Strip Use
39.4 Accessory Electrical Outlet Use
39.5 Mount StarFire? Receiver
39.6 Connect Compatible Electronic Equipment
39.7 Configure Tractor for GPS or Radar
39.8 Refrigerator or Storage Space
39.9 Implement Connector Use
39.10 Use AutoLoad? Harness Connector [Scraper]
40 HVAC
40.1 HVAC Settings?Access
40.2 HVAC Settings
40.3 HVAC Settings?Climate Control Automation
40.4 HVAC Settings?Set Temperature
40.5 HVAC Settings?Air Flow Mode
40.6 HVAC Settings?Fan Speed
40.7 HVAC Settings?Air Conditioning
41 Performance Ballasting
41.1 Ballast Recommendations
41.2 Mounted Attachments [Ag]
41.3 Measure Track Slip [Ag]
41.4 Quik-Tatch? Weight Use [Ag]
42 Transport
42.1 Weight Chart – Narrow Track (If Equipped) [Ag]
42.2 Driving Tractor on Roads
42.3 Extended Road Transport
42.4 Towed Mass
42.5 Towed Loads and Transport with Ballast
42.6 Use Safety Lights and Devices
42.7 Safety Chains Use
42.8 Carrier Transport
42.9 Load Extended Axle Width Track Tractor [Ag]
42.10 Tow Mode?Engine Will Start
42.11 Tow Mode?Engine Will Not Start
42.12 Come Home Mode
42.13 Freeing a Mired Machine
43 Fuel, Lubricants, and Coolant – General Information
43.1 Determine Tractor Engine Type
43.2 Minimizing the Effect of Cold Weather on Diesel Engines
43.3 Oil Filters
44 Fuel
44.1 Diesel Fuel
44.2 Supplemental Diesel Fuel Additives
44.3 Biodiesel Fuel
44.4 Lubricity of Diesel Fuel
44.5 Handling and Storing Diesel Fuel
44.6 Avoid Static Electricity Risk When Refueling
44.7 Fill Fuel Tank
44.8 Testing Diesel Fuel
44.9 Fuel Filters
45 Diesel Exhaust Fluid (DEF)
45.1 Fill DEF Tank – FT4/Stage V Engine
45.2 Diesel Exhaust Fluid (DEF) ? Use in Selective Catalytic Reduction (SCR) Equipped Engines
45.3 Storing Diesel Exhaust Fluid (DEF)
45.4 Refilling Diesel Exhaust Fluid (DEF) Tank
45.5 Testing Diesel Exhaust Fluid (DEF)
45.6 Disposal of Diesel Exhaust Fluid (DEF)
46 Engine Oil
46.1 Diesel Engine Oil Service Interval for Operation at High Altitude
46.2 Diesel Engine Oil ? Tier 2 and Stage II
46.3 Engine Oil and Filter Service Intervals ? Tier 2 and Stage II Engines
46.4 Diesel Engine Oil ? Tier 3 and Stage IIIA
46.5 Engine Oil and Filter Service Intervals ? Tier 3 and Stage III A ? PowerTech? Plus Engines
46.6 John Deere Break-In Plus? Engine Oil ? Final Tier 4/Stage V 13.5 L Engine
46.7 Break-In Engine Oil Use ? Final Tier 4/Stage V 15 L Engines
46.8 Diesel Engine Oil ? Interim Tier 4, Final Tier 4, Stage IIIB, Stage IV, and Stage V
46.9 Engine Oil and Filter Service Intervals ? Final Tier 4/Stage V 13.5 L Engines
46.10 Engine Oil and Filter Service Intervals
47 Engine Coolant
47.1 Diesel Engine Coolant (engine with wet sleeve cylinder liners)
47.2 John Deere COOL-GARD? II Coolant Extender
47.3 Operating in Warm Temperature Climates
47.4 Water Quality for Mixing with Coolant Concentrate
47.5 Testing Coolant Freeze Point
47.6 Disposing of Coolant
48 Other Lubricants
48.1 Transmission and Hydraulic Oil
48.2 Multipurpose Extreme Pressure (EP) Grease
48.3 Lubricant Storage
48.4 Mixing of Lubricants
48.5 Alternative and Synthetic Lubricants
49 Service – General Information
49.1 Service Sections Overview
49.2 Service Tasks Performed As Required
49.3 Identify Tractor Engine Emissions Status
49.4 Open Hood
49.5 Open Hood (If Equipped)
49.6 Remove Engine Access Panel
49.7 Remove Front Engine Side Shield
49.8 Remove Rear Engine Side Shield
49.9 Jack Up Tractor – Lifting Points and Support Stand Placement
49.10 Service and Connect STC? (Snap-to-Connect) Fittings
49.11 Diesel Particulate Filter Service
49.12 Exhaust Filter / Diesel Particulate Filter Ash Handling and Disposal
49.13 Exhaust Filter Disposal
49.14 Transmission Calibration
49.15 Abort Transmission Calibration
49.16 Do Not Modify Fuel System
49.17 Do Not Open High-Pressure Fuel System
49.18 Bleed Fuel System
49.19 Identify Zinc-Flake Coated Fasteners
49.20 Metric Bolt and Screw Torque Values
49.21 Unified Inch Bolt and Screw Torque Values
50 Break-In Service (100 Hours or Less)
50.1 Perform Break-In Services
50.2 Perform Track Systems Break-In
51 Service – Record Charts
51.1 Engine Oil and Filter Change
51.2 As Required Service
51.3 Annual Service
51.4 10 Hour or Daily Service
51.5 50 Hour Service
51.6 250 Hour Service
51.7 400 Hour Service
51.8 500 Hour Service
51.9 750 Hour Service
51.10 800 Hour Service
51.11 1000 Hour Service
51.12 1200 Hour Service
51.13 1250 Hour Service
51.14 1500 Hour Service
51.15 1600 Hour Service
51.16 1750 Hour Service
51.17 2000 Hour Service
51.18 2250 Hour Service
51.19 2400 Hour Service
51.20 2500 Hour Service
51.21 2750 Hour Service
51.22 2800 Hour Service
51.23 3000 Hour Service
51.24 3200 Hour Service
51.25 3250 Hour Service
51.26 3500 Hour Service
51.27 3600 Hour Service
51.28 3750 Hour Service
51.29 4000 Hour Service
51.30 4250 Hour Service
51.31 4400 Hour Service
51.32 4500 Hour Service
51.33 4750 Hour Service
51.34 4800 Hour Service
51.35 5000 Hour Service
51.36 5200 Hour Service
51.37 5250 Hour Service
51.38 5500 Hour Service
51.39 5600 Hour Service
51.40 5750 Hour Service
51.41 6000 Hour Service
51.42 Services – 6250 to 8800 Hours
51.43 9000 Hour Service
51.44 Services Beyond 9000 Hours
52 Service – Clean
52.1 Tractor Exterior
52.2 Diesel Particulate Filter (DPF)?Final Tier 4/Stage V Engine
52.3 Engine Cooling System?13.5 L Engine
52.4 Engine Cooling System?15 L Engine
52.5 Cleaning Diesel Exhaust Fluid (DEF) Tank
52.6 DEF Tank Filler Neck Filter
52.7 Clean Display
52.8 Dual Beam Radar Sensor
52.9 Aftertreatment Fuel Injector?15 L Engine
52.10 Optional Fuel Water Separator
53 Service – Check
53.1 Engine Coolant Level
53.2 Engine Coolant Freeze Point
53.3 Optional Fuel/Water Separator
53.4 Water Separator
53.5 Engine and Exhaust Compartments
53.6 Outer Exhaust Screens
53.7 Air Conditioning System
53.8 Engine Water Pump Weep Hole?13.5 L Engine
53.9 Engine Water Pump Seal?15 L Engine
53.10 Fuel Tank Sump
53.11 Engine Oil Level?13.5 L Engine
53.12 Engine Oil Level?15 L Engine
53.13 Transmission-Hydraulic Oil Level
53.14 Track Alignment
53.15 Track Tension
53.16 Track Wear
53.17 Track Trash Buildup
53.18 Undercarriage
53.19 Cab Suspension Bushings
53.20 Undercarriage Articulation Bumper Stops
53.21 Drive, Mid-Rollers, and Idler Wheels
53.22 Mid-Rollers Oil Level
53.23 Idler Wheel Hub Oil Level
53.24 Drive Wheel Scraper Clearance
53.25 Secondary Brake
53.26 NEUTRAL Start System
53.27 Transmission PARK System
53.28 Engine Air Intake System?13.5 L Final Tier 4/Stage V Engine
53.29 Engine Air Intake System?13.5 L Tier 2/Stage II or Tier 3/Stage IIIA Engines
53.30 Engine Air Intake System?15 L Engine
53.31 Seat Belts
53.32 Engine Auxiliary Drive Belt and Drive Belt Tensioner
53.33 Engine Valve Clearance
53.34 Vari-Cool? Fan Drive and Belt?13.5L Final Tier 4/Stage V Engine
53.35 Suspension Mount Clearance (Narrow Track) (For Australia Only)
53.36 Front Driveshaft Health (FDH) Sensor System
53.37 Drawbar Sensor Calibration
54 Service – Tighten
54.1 Mid-Roller, Drive, and Idler Wheel Fasteners
54.2 Drawbar Support Cap Screws
55 Service – Change
55.1 Vari-Cool? Fan Belt?13.5 L Final Tier 4/Stage V Engine
55.2 Fan Belt?13.5 L Tier 2/Stage II or Tier 3/IIIA Engines
55.3 Auxiliary Drive Belt?13.5 L Engine
55.4 Engine Auxiliary Drive Belt?15 L Engine
55.5 Engine Water Pump Drive Belt?15 L Engine
55.6 Vari-Cool? Fan Drive Bushings and Seals?13.5L Final Tier 4/Stage V Engine
55.7 Vari-Cool? Fan Drive Bearing and Retaining Capscrew?13.5L Final Tier 4/Stage V Engine
55.8 Engine Oil and Filter?13.5 L Engine
55.9 Engine Oil and Filter?15 L Engine
55.10 Fuel Filters?13.5 L Engine
55.11 Fuel Filters?15 L Engine
55.12 Optional Fuel Water Separator Filter Element
55.13 Cab Recirculation Air Filter
55.14 Cab Fresh Air Filter
55.15 Engine Primary and Secondary Air Filters?Tier 2/Stage II or Tier 3/Stage IIIA Engine
55.16 Engine Primary and Secondary Air Filters?Final Tier 4/Stage V Engine
55.17 Fuel Tank Vent Filters
55.18 SCV Pilot Valve Filter
55.19 DEF Tank Vent Filter?Final Tier 4/Stage V Engine
55.20 In-Line DEF Filter
55.21 Transmission-Hydraulic Oil and Filters
55.22 Engine Cooling System Radiator Cap?15 L Engine
55.23 Transmission-Hydraulic Vent Filter
55.24 Access DEF Dosing Unit Filter?Final Tier 4 or Stage V Engine
55.25 DEF Dosing Unit Filter?Final Tier 4/Stage V Engine
55.26 Transmission Drive Shaft Damper
55.27 Engine Coolant?13.5 L Engine
55.28 Engine Coolant?15 L Engine
55.29 Engine Crankshaft Damper?13.5 L Engine
55.30 Engine Crankcase Breather Filter Element?15 L Engine
55.31 Front Drive Shaft U-Joints
56 Service – Lubricate
56.1 Heavy Duty Lift Link Pins (Optional)
56.2 Hinge Pins
56.3 Steering Pins
56.4 Telescoping Drive Shaft
56.5 PTO Drive Shaft
56.6 Track Tension Cylinder
56.7 Heavy-Duty Gudgeon Bearings
56.8 Lower Drive Line Bearings
56.9 Rear Hitch
56.10 Lift Cylinders and Rockshaft
56.11 Vari-Cool? Fan Drive?13.5 L Final Tier 4/Stage V Engine
57 Service – Electrical
57.1 Service – Electrical Overview
57.2 Welding Near Electronic Control Units
57.3 Keep Electronic Control Unit Connectors Clean
57.4 Compressed Air Use
57.5 High-Pressure Washer Use
57.6 Disconnect Battery
57.7 Handling Batteries Safely
57.8 Service Batteries and Connections
57.9 Access Load Center Fuses
57.10 Access Master Fuses
57.11 Access Implement Power Relay Module Fuses
57.12 Handle Halogen Light Bulbs Safely
57.13 Change Front HID/LED Light Assembly
57.14 Change Front Grille Halogen Light Bulbs
57.15 Adjust Front Grille Lights
57.16 Adjust Headlights
57.17 Change Front, Side And Rear Cab Roof Light Bulb
57.18 Change Brake or Turn Signal Light Bulb
57.19 Change Dome Light Bulb
57.20 Change Extremity Warning Light Bulb
58 Troubleshooting – Procedures
58.1 Engine
58.2 Transmission-Hydraulic-Axles
58.3 Hydraulic System
58.4 Brakes
58.5 Hitch
58.6 Selective Control Valve (SCV)
58.7 Electrical System
58.8 Operator Enclosure
59 Troubleshooting – Diagnostic Trouble Codes (DTC)
59.1 STOP, Service, and Information Alerts on CommandCenter?
59.2 Access Diagnostic Trouble Codes
60 Service – Storage
60.1 Place Tractor in Storage
60.2 Remove Tractor from Storage
61 Specifications
61.1 Engine: John Deere
61.2 Engine: QSX15 Cummins?
61.3 Capacities
61.4 Hydraulics
61.5 Transmission and Power Train
61.6 PTO [Ag], Hitch [Ag], and Drawbar
61.7 Electrical
61.8 Integrated Technology
61.9 Overall Dimensions
61.10 Loads and Weights [Ag]
61.11 Loads and Weights [Scraper]
61.12 How to Calculate Permissible Mass
61.13 Sound Level
61.14 Cab Classification According to EN 15695-1 (for Application of Crop Protection Chemicals and Liquid Fertilizer)
61.15 Ground Speeds?e18? PowerShift Transmission
61.16 Limited Battery Warranty
61.17 Eurasian Economic Union
61.18 Machine Design Life
61.19 Required Emission-Related Information
61.20 Carbon Dioxide Emissions (CO?)
62 Identification Numbers
62.1 Identification Plates
62.2 Product Identification Number
62.3 Product Identification Number (China Only)
62.4 Engine Serial Number
62.5 Cab Serial Number
62.6 Transmission Serial Number
62.7 Track Serial Numbers
62.8 PTO Dropbox Serial Number [Ag]
62.9 PTO Clutch Serial Number [Ag]
62.10 Keep Proof of Ownership
62.11 Keep Machines Secure
63 Change of Ownership
63.1 Subsequent Ownership
64 Predelivery
64.1 Predelivery Checklist
64.2 Delivery Checklist and Certificate
65 John Deere Service Literature Available
65.1 Technical Information
66 John Deere Service Keeps You On The Job
66.1 John Deere Parts
66.2 The Right Tools
66.3 Well-Trained Technicians
66.4 Prompt Service
