Table of Content:
1 Introduction
1.1 Foreword
1.2 Emissions Performance and Tampering
1.3 How to Search Parts Information
2 Glossary
2.1 Glossary
2.2 Trademarks
3 Safety
3.1 Recognize Safety Information
3.2 Understand Signal Words
3.3 Follow Safety Instructions
3.4 Prepare for Emergencies
3.5 Wear Protective Clothing
3.6 Protect Against Noise
3.7 Handle Fuel Safely?Avoid Fires
3.8 Handle Starting Fluid Safely
3.9 Fire Prevention
3.10 In Case of Fire
3.11 Avoid Static Electricity Risk When Refueling
3.12 Keep ROPS Installed Properly
3.13 Use Foldable ROPS and Seat Belt Properly
3.14 Stay Clear of Rotating Drivelines
3.15 Use Steps and Handholds Correctly
3.16 Read Operator?s Manuals for ISOBUS Controllers
3.17 Use Seat Belt Properly
3.18 Operating the Tractor Safely
3.19 Avoid Backover Accidents
3.20 Limited Use in Forestry Operation
3.21 Operating the Loader Tractor Safely
3.22 Keep Riders Off Machine
3.23 Instructional Seat
3.24 Use Safety Lights and Devices
3.25 Transport Towed Equipment at Safe Speeds
3.26 Use Caution on Slopes, Uneven Terrain, and Rough Ground
3.27 Freeing a Mired Machine
3.28 Avoid Contact with Agricultural Chemicals
3.29 Handle Agricultural Chemicals Safely
3.30 Handling Batteries Safely
3.31 Avoid Heating Near Pressurized Fluid Lines
3.32 Remove Paint Before Welding or Heating
3.33 Handle Electronic Components and Brackets Safely
3.34 Practice Safe Maintenance
3.35 Avoid Hot Exhaust
3.36 Clean Exhaust Filter Safely
3.37 Work In Ventilated Area
3.38 Support Machine Properly
3.39 Prevent Machine Runaway
3.40 Park Machine Safely
3.41 Transport Tractor Safely
3.42 Service Cooling System Safely
3.43 Service Accumulator Systems Safely
3.44 Service Tires Safely
3.45 Service Front-Wheel Drive Tractor Safely
3.46 Tightening Wheel Retaining Bolts/Nuts
3.47 Avoid High-Pressure Fluids
3.48 Do Not Open High-Pressure Fuel System
3.49 Store Attachments Safely
3.50 Decommissioning ? Proper Recycling and Disposal of Fluids and Components
4 Pictorial Safety Signs
4.1 Pictorial Safety Signs
4.2 Replace Safety Signs
4.3 Operator’s Manual
4.4 Use Seat Belt Properly
4.5 Pressure Accumulator of the Front Axle Suspension
4.6 Brake System Accumulator
4.7 Never Carry Riders (China Only)
4.8 PTO and Rotating Parts of Implements (China Only)
4.9 Hitch Remote Control
4.10 Engine Cooling System (China Only)
4.11 Fuel Tank (China Only)
5 Usage Statement of Diesel Fuel
5.1 Usage Statement of Diesel Fuel
6 Vehicle Overview
6.1 Identification View
7 Operator’s Manual ? General Information
7.1 General Information and Scope of Manual
7.2 How to Use This Manual
7.3 Comply with Operator’s Manuals of Implement Manufacturers
8 Operating the Engine
8.1 Important Engine Information
8.2 Engines with Turbocharger
8.3 Engine Protection
8.4 Required Machine Stop Warning
8.5 Access the Engine Menu
8.6 Check Engine Indicator Lights and Displays
8.7 Starting the Engine
8.8 Engine Start with an Auxiliary Battery
8.9 Shutting Off the Engine
8.10 Battery Disconnect System (If Equipped)
8.11 Tow-Starting
8.12 Fill the Fuel Tank
8.13 Fill the DEF Tank
9 Cold-Weather Operation
9.1 Cold Start Aids
9.2 Coolant Heater
9.3 Ground Fault Circuit Interrupter (GFCI)
10 Aftertreatment
10.1 Exhaust Filter Cleaning, General Information
10.2 Required Machine Stop Warning
10.3 Aftertreatment Indicators Overview
10.4 Access the Engine Menu
10.5 Exhaust Filter Cleaning Overview
10.6 AUTO Exhaust Filter Cleaning
10.7 Parked Exhaust Filter Cleaning
10.8 Exhaust Filter, Service Cleaning
10.9 Exhaust Cleaning System, Information for Operator
10.10 DEF (Diesel Exhaust Fluid) Level Gauge
10.11 Selective Catalytic Reduction (SCR) System Overview
11 Operator Controls
11.1 Vehicle Controls
11.2 Key Switch
11.3 Secondary Brake System
11.4 PTO Controls
11.5 Rear Hitch Controls
11.6 Electronic Selective Control Valves (SCV), Controls
11.7 Front-Wheel Drive Controls
11.8 Differential Lock Controls
11.9 Heating and Ventilation Controls
11.10 Radio?Additional Radio Controls
11.11 Radio?Additional Phone Controls
11.12 Intelligent Total Equipment (iTEC?), Controls
11.13 AutoTrac? Controls
11.14 ISOBUS Button (ISB)
12 Corner Post Display
12.1 Corner Post Display, Overview
12.2 Corner Post Display
12.3 Warning Indicators
12.4 Digital Indicators?Revolution Counter, Travel Speed, Transmission, and Set Speed
12.5 Gauges – Coolant Temperature, DEF Level, and Fuel Level
13 CommandARM? Controls
13.1 Controls with Variable Functions
13.2 Controls Setup?General Information
13.3 Controls Setup?Assignment of Functions
13.4 Controls Setup?Resetting to Default
13.5 Controls Setup?Custom Settings (Settings Manager)
14 CommandCenter?
14.1 Generation 4 Display
14.2 Machine Settings Overview
14.3 Automation Status Overview
14.4 Navigate Generation 4 CommandCenter?
14.5 Compatible Displays
14.6 Power Display On and Off
14.7 Shortcut Buttons
14.8 Navigate to Display and Sound
14.9 Navigate to the Section Multiple Displays
14.10 Navigate to Date and Time
14.11 Navigate to Language and Units
14.12 Change Pages and Values
14.13 Navigate to Software Manager
14.14 Factory and Service ADVISOR? Installed Onscreen Help
14.15 Navigate to File Manager
14.16 Export Custom Tractor Settings
14.17 Import Custom Tractor Settings
14.18 Navigate to Settings Manger
14.19 Navigate to Diagnostics Center
14.20 Navigate to Users and Access
14.21 Navigate to Layout Manager
14.22 Navigate to Fields Page
14.23 Navigate to Equipment Manager
14.24 Navigate to Machine Monitor
14.25 Navigate to Work Monitor
14.26 Navigate to Maintenance and Calibrations
14.27 Radar Calibration
14.28 Wheel Slip Calibration
14.29 Navigate to Controls Setup
14.30 Controls
14.31 Controls Setup
14.32 Automation Status
14.33 Read ISOBUS Control Unit Operator?s Manual
14.34 Use Video Display Capability Properly
14.35 Navigate to Video Application
15 Radio Operation
15.1 Radio?Controls and Instruments
15.2 Radio?Auxiliary and USB Inputs
16 Guidance
16.1 AutoTrac? Steering System (If Equipped)
16.2 Variable Ratio Steering (If Equipped)
17 Intelligent Total Equipment Control (iTEC?)
17.1 iTEC? Controls and Functions (CommandARM?)
17.2 CommandCenter? Pages Descriptions and Functions
17.3 Status Area
17.4 All Sequences Page
17.5 Add New Sequence
17.6 Sequence, Available Functions, and Measures
17.7 Sequence Step Status
17.8 Edit or Remove Sequence
17.9 Sequence Sets Page
17.10 Perform Sequence
17.11 Recommendations (AutoLearn)
18 Tractor-Implement Management (TIM and TIA?)
18.1 TIM and TIA??Tractor-Implement Management (General)
18.2 TIM/TIA??Operator Controls
18.3 TIM/TIA??Activating the Implements
18.4 TIM/TIA??Requirements for Rear Hitch
18.5 TIM/TIA??Requirements for PTO
18.6 TIM/TIA??Requirements for Electronic Selective Control Valves (SCV)
18.7 TIM/TIA??Requirements for Guidance
18.8 TIM/TIA??Requirements for AutoPowr?/IVT?
18.9 TIM/TIA??Operating the Tractor-Implement Automation
19 Drivetrain
19.1 Drive Systems, Overview
20 Front-Wheel Drive
20.1 Front-Wheel Drive?Manual Engagement and Disengagement
20.2 Front-Wheel Drive?Automatic Engagement and Disengagement
20.3 Front-Wheel Drive?Smart MFWD (Optional)
20.4 Front-Wheel Drive?Automatic Disengagement Depending on the Steering Angle (Optional)
20.5 Tractor Equipped with Front Suspension Option
21 Differential Lock
21.1 Differential Lock?Manual Engaging/Disengaging
21.2 Differential Lock?Automatic Engaging/Disengaging
21.3 Differential Lock?Automatic Engaging/Disengaging via Custom Shutoff Angle (If Equipped)
22 Brakes
22.1 Hydraulic Service Brakes
22.2 Secondary Brake System
22.3 Park the Tractor with AutoPowr?/IVT?
22.4 Chock Block
23 Transmission – General Information
23.1 Reduce Fuel Consumption
23.2 Notes on Changing to a Different Size of Tire
23.3 Transmission, Information on Maximum Speed
23.4 Switch the Backup Alarm ON or OFF (If Equipped)
24 AutoPowr?/IVT? Transmission
24.1 AutoPowr?/IVT??Controls
24.2 AutoPowr?/IVT??Park Lock
24.3 AutoPowr?/IVT??Reverse Drive Lever
24.4 AutoPowr?/IVT??Speed Control Lever
24.5 AutoPowr?/IVT??Speed Control Pedal and Hand Throttle
24.6 AutoPowr?/IVT??Brake Pedals
24.7 AutoPowr?/IVT??Clutch Pedal
24.8 AutoPowr?/IVT??Special Features when Maneuvering the Tractor
24.9 AutoPowr?/IVT??Cold-Weather Starting
24.10 AutoPowr?/IVT??Set Travel Speed
24.11 AutoPowr?/IVT??Maximum Engine Speed
24.12 AutoPowr?/IVT??Set Operating Mode
24.13 AutoPowr?/IVT??Set Engine Speed Reduction (Custom Setting)
24.14 AutoPowr?/IVT??Set Engine Droop (Custom Setting)
24.15 AutoPowr?/IVT??Adjust Engine Speed for Additional Load Anticipation
24.16 AutoPowr?/IVT??Set Reverse/Forward Speed Ratio
24.17 AutoPowr?/IVT??AutoClutch Sensitivity
24.18 AutoPowr?/IVT??Operation on Hillsides in Slippery Conditions
24.19 AutoPowr?/IVT??Use Creeper Mode
24.20 AutoPowr?/IVT??Use Individual Brake Pedals
24.21 AutoPowr?/IVT??Speed Control Pedal Mode
24.22 AutoPowr?/IVT??Stop and Park the Tractor
24.23 AutoPowr?/IVT??Come-Home Mode
24.24 AutoPowr?/IVT??Tow the Tractor
24.25 Backup Alarm (If Equipped)
25 PTO Shaft, Rear Hitch, and Trailer Hitches
25.1 Rear Hitch – Maximum Lifting Force
26 PTO Shaft?General Information
26.1 Rear PTO?PTO Shield
26.2 None-Rotating PTO Guard
26.3 Operating Instructions
26.4 PTO Speeds
26.5 PTO Options
27 Rear PTO
27.1 Rear PTO
27.2 Engage and Disengage the Rear PTO
27.3 Rear PTO?Select Standard Speed (Shiftable PTO)
27.4 Rear PTO?Fine Adjustment of PTO Speeds (Shiftable PTO)
27.5 Rear PTO?Remote Control and Function
27.6 Rear PTO?Change the PTO Stub Shaft
27.7 Rear PTO?Connect an Implement
28 Rear Hitch
28.1 Rear Hitch?Operation with CommandARM?
28.2 Rear Hitch?Settings and Functions in CommandCenter?
28.3 Rear Hitch?General Information on Electronic Hitch Sensing
28.4 Rear Hitch?Use the Depth Control Lever
28.5 Rear Hitch?Set Operating Depth
28.6 Rear Hitch?Use the Float Position
28.7 Rear Hitch ? Set the Raise Height Limit
28.8 Rear Hitch ? Adjust the Rate-of-Drop
28.9 Rear Hitch ? Set the Raise Rate
28.10 Rear Hitch ? Draft/Depth Control Adjustment
28.11 Rear Hitch?Use the Depth Control
28.12 Rear Hitch?Use Draft Control
28.13 Rear Hitch ? Adjust Slip Sensitivity (If Equipped)
28.14 Rear Hitch ? Set Locking Height of the Stabilizer Bar (If Equipped)
28.15 Rear Hitch?Driving under Load with Mounted Implement
28.16 Rear Hitch?Hitch Dampening
28.17 Rear Hitch?Remote Control
28.18 Rear Hitch?Direct Actuation
28.19 Three-Point Hitch
28.20 Quick-Coupling (Hook-Type) Draft Links
28.21 Attach Three-Point Hitch Mounted and Drawn Implements
28.22 Leveling Implement
28.23 Center Link
28.24 Center Link Positions
28.25 Hook-Type Center Link
28.26 Adjust Lift Links
28.27 Lift Links?Adjust for Vertical Float
28.28 Stabilizer Bar (If Equipped)
28.29 Stabilizing System (If Equipped)
28.30 Draft Links ? Adjust Spreading Dimension
28.31 Adjust Draft Links for Category II/IIIN or III (If Equipped)
29 Trailer Hitches
29.1 Trailer Hitches?Foreword
29.2 CAT III Drawbar
29.3 Proper Use of Drawbar
29.4 Lock the Hitch Pin
29.5 Hitch Jaw
30 Hydraulic System
30.1 Selective Control Valves (SCVs) ? Maximum Permissible Oil Withdrawal
30.2 Using Large-Volume Hydraulic Cylinders
30.3 Additional Oil Reservoir
31 Hydraulic Connections
31.1 Fittings of Selective Control Valves (SCVs)
31.2 Connect Hydraulic Hoses to SCVs
31.3 Disconnect Hydraulic Hoses from SCVs
31.4 Hydraulic Connections for Implements and Hydraulic Motors
31.5 Connect Implements to SCVs
32 Selective Control Valves (SCVs) – Controls
32.1 SCV Control Levers (CommandARM?)
32.2 SCV Control Levers ? Neutral Position
32.3 SCV Control Levers ? Extend and Extend Click Position
32.4 SCV Control Levers ? Retract and Retract Click Position
32.5 SCV Control Levers ? Float Position (Detent)
33 Selective Control Valves (SCVs) – Settings
33.1 SCV Main Page
33.2 SCV ? Activate/Deactivate Independent Mode
33.3 SCV ? Set Flow Time
33.4 SCV ? Set Flow Rate
33.5 SCV ? Set Responsiveness
33.6 SCV ? Activate/Deactivate Loader Mode
34 Wheels and Tires
34.1 Axles Overview
34.2 Tires and Wheels?Foreword
34.3 General Wheel, Tire, and Tread Guidelines
34.4 Prevent Front Wheel or Fender Contact with Tractor Components
34.5 Change to a Different Tire Size
34.6 Changing the Tire Combination
34.7 Use of Dual Wheels (Easy-to-Attach)
34.8 Service Tires Safely
34.9 Change Wheels Safely
34.10 Wheel Exchange with Wheel Weights
34.11 Air Pressures and Load Capacities of Tires
34.12 Tire Pressures
34.13 Tire Inflation Pressure Guidelines
34.14 Select Tire Inflation Pressure
35 Front Wheels, Tires, and Tread Widths
35.1 Tires and Wheels?Foreword
35.2 Front Tires with Front-Wheel Drive
35.3 Front-Wheel Drive Axle?Toe-In Check and Adjustment
35.4 Front-Wheel Drive Axle?Check Toe-In (Conventional Method)
35.5 Front-Wheel Drive Axle?Check Toe-In Using a Laser Wheel-Measuring Tool
35.6 Front-Wheel Drive Axle?Adjust Toe-In
35.7 Front-Wheel Tread Adjustment
36 Steering Stop and Fender?Settings
36.1 Three-Piece Front Axle (Version 2)?Identify Axle Type
36.2 Three-Piece Front Axle (Version 2)?Notes on Adjusting the Steering Stop (750 and 755)
37 Rear Wheels, Tires, and Tread Widths
37.1 Tires and Wheels?Foreword
37.2 Rear Wheel Tread Adjustment
37.3 Steel Adjustable Wheels in Combination with Adjustable Rear Axles
37.4 Rack-and-Pinion Axles?Adjust Tread Widths for Steel and Cast Rear Wheels
38 Operator’s Cab
38.1 Avoid Contact with Agricultural Chemicals
38.2 Clean Vehicle of Hazardous Pesticides
38.3 Emergency Exits
38.4 Roll-Over Protective Structure
38.5 Use Seat Belt
39 Seat Adjustment
39.1 Seat Adjustment and Functions
39.2 CommandARM??Adjust Height
39.3 Instructional Seat for Training Purposes
40 Steering Column
40.1 Adjust the Steering Wheel
41 Mirrors
41.1 Adjustable Outside Mirrors
42 Access Steps
42.1 Access Steps and Handrails
42.2 Remove and Install Right Access Step
42.3 Remove and Install Left Access Step
43 Wiper/Washer System
43.1 Wiper and Washer System
44 Heater/Ventilation/Air Conditioning (HVAC)
44.1 Heating and Ventilation
44.2 Air Flow Distribution, Description
44.3 Heater/Ventilation/Air-Conditioning System and Rear Window Heater
45 Lights
45.1 Overview of the Lights
45.2 Shift Lever for Turn Signal and Horn with Detent Position
45.3 Shift Lever for Turn Signal and Horn without Detent Position
45.4 Light Switch (Low/High-Beam Headlights)
45.5 Select Headlights
45.6 Select Worklights
45.7 Worklights of ISOBUS Implement
45.8 Select Egress Light
45.9 Switch On the Hazard Warning Lights
45.10 Access-Step Light
45.11 Dome Lights
45.12 Seven-Terminal Trailer Socket
46 Power Outlet Sockets
46.1 Sockets ? Overview, Cab with CommandARM?
46.2 Socket for GreenStar? Display
46.3 USB Service Connection for CommandCenter?
46.4 3-Terminal Power Outlet Socket and Power Outlet Socket Strip (12V, ECE)
46.5 12-V Power Outlet Socket/Cigarette Lighter
46.6 ISOBUS Socket in Cab
46.7 Signal Socket According to ISO Standard 11786
46.8 USB Charging Sockets
46.9 12-V Socket on CommandARM?
46.10 Diagnostic Connector (CAN Bus)
46.11 Radio A?Auxiliary and USB Inputs
46.12 ISOBUS Socket (ISB), Rear Hitch
46.13 Seven-Terminal Trailer Socket, Rear Hitch
47 Accessories
47.1 Storage Tray
47.2 Install Additional Monitors
47.3 Open Rear Window
47.4 Rear Window – Cable Guides
47.5 Sunshade
47.6 Tank Filler Cap
48 Performance Ballast
48.1 Ballasting Information and Guidelines for Tractors with Single Tires
48.2 General Guidelines for Tractor Weight Based on Engine Horsepower (according to UN ECE R120, using PS as Unit of Measurement)
48.3 Selection of Weights
48.4 Load on Rear Wheels
48.5 Measure Rear Wheel Slip
48.6 Change Wheel Weights Safely
48.7 Weight in Three-Point Hitch
48.8 Install Front Weights
49 Transport
49.1 Transporting Tractor
49.2 Lashing the Tractor on a Transport Trailers
49.3 Wash Machine After Unloading
49.4 Driving on Public Roads
49.5 Towing Loads and Transporting with Ballast
49.6 Freeing a Mired Machine
49.7 AutoPowr?/IVT??Tow the Tractor
49.8 Tow the Tractor
49.9 Release the Park Lock Manually
50 Fuel, Lubricants, and Coolant
50.1 Oil Filters
50.2 Fuel Filters
50.3 Storing Fuel
50.4 Oilscan? and CoolScan?
51 Diesel Fuel
51.1 Diesel Fuel
51.2 Handling and Storing Diesel Fuel
51.3 Lubricity of Diesel Fuel
51.4 Testing Diesel Fuel
51.5 Biodiesel Fuel
51.6 Minimizing the Effect of Cold Weather on Diesel Engines
51.7 Supplemental Diesel Fuel Additives
52 Diesel Exhaust Fluid
52.1 Diesel Exhaust Fluid (DEF) ? Use in Selective Catalytic Reduction (SCR) Equipped Engines
52.2 Refilling Diesel Exhaust Fluid (DEF) Tank
52.3 Storing Diesel Exhaust Fluid (DEF)
52.4 Testing Diesel Exhaust Fluid (DEF)
52.5 Disposal of Diesel Exhaust Fluid (DEF)
53 Engine Oil
53.1 John Deere Break-In Plus? Engine Oil ? Interim Tier 4, Final Tier 4, Stage IIIB, Stage IV, and Stage V
53.2 Diesel Engine Oil ? Interim Tier 4, Final Tier 4, Stage IIIB, Stage IV, and Stage V
53.3 Engine Oil and Filter Service Intervals ? Interim Tier 4, Final Tier 4, Stage IIIB, Stage IV, and Stage V Engines
53.4 Diesel Engine Oil Service Interval for Operation at High Altitude
54 Engine Coolant
54.1 Diesel Engine Coolant (engine with wet sleeve cylinder liners)
54.2 Operating in Warm Temperature Climates
54.3 Water Quality for Mixing with Coolant Concentrate
54.4 Testing Coolant Freeze Point
55 Other Lubricants
55.1 Transmission and Hydraulic Oil
55.2 Oil for Front-Wheel Drive Axle
55.3 Multipurpose Extreme Pressure (EP) Grease
55.4 Grease for Automated Lubrication Systems
55.5 Grease
55.6 Multipurpose Grease
55.7 Mixing of Lubricants
55.8 Lubricant Storage
55.9 Alternative and Synthetic Lubricants
56 Service?General Information
56.1 Required Emission-Related Information
56.2 Safe Maintenance and Cleaning
56.3 Using High-Pressure Washers
56.4 Observe Service Intervals
56.5 Maintenance Intervals
56.6 Raise the Hood
56.7 Open Service Door for Dipstick
56.8 Open Service Doors
56.9 Bleed Air from Fuel System (6-Cylinder Engines)
56.10 Jack Up the Tractor, Lifting Points
56.11 General Instructions Regarding the Condition of the Tractor
56.12 Inspect/Replace Hydraulic Hoses
56.13 Important Instructions Regarding Alternator
56.14 Note on Wheels and Tires
56.15 Notes on, Before Initial Start-Up and Daily Service
56.16 Service Checks (If Equipped)
56.17 Instructions for Starting up the Air-Conditioning System
56.18 Unified Inch Bolt and Screw Torque Values
56.19 Metric Bolt and Screw Torque Values
57 Service Intervals and Records
57.1 GENERAL INFORMATION
57.2 Notes
57.3 Service Daily or Every 10 Operating Hours
57.4 Service (As Required, Annually, Every 2 and 3 Years) (Only on Tractors with 6-Cylinder Final Tier 4 Engines)
57.5 Periodic Service
57.6 Information on Engine Oil Change
57.7 Engine Oil and Filter Change
57.8 Engine Oil and Filter Change
57.9 Engine Oil and Filter Change
57.10 Engine Oil and Filter Change
57.11 Service the Engine Air Cleaner and Cab Air Filters
57.12 Service the Engine Air Cleaner and Cab Air Filters
57.13 Service the Cooling System
57.14 Service the Cooling System
57.15 Service the DEF System
57.16 Service the DEF System
57.17 Yearly
57.18 Yearly
57.19 Service after 100 Operating Hours
57.20 Service after 500 Operating Hours
57.21 Service after 750 Operating Hours
57.22 Service after 1000 Operating Hours
57.23 Service after 1500 Operating Hours
57.24 Service after 2000 Operating Hours
57.25 Service after 2250 Operating Hours
57.26 Service after 2500 Operating Hours
57.27 Service after 3000 Operating Hours
57.28 Service after 3500 Operating Hours
57.29 Service after 3750 Operating Hours
57.30 Service after 4000 Operating Hours
57.31 Service after 4500 Operating Hours
57.32 Service after 5000 Operating Hours
57.33 Service after 5250 Operating Hours
57.34 Service after 5500 Operating Hours
57.35 Service after 6000 Operating Hours
57.36 Information about Further Services
57.37 Record for Further Services
58 Service?Cleaning
58.1 Clean CommandCenter? Screen
58.2 Clean Dust Unloading Valve
58.3 Clean Radiator, Viscous Fan, Condenser, and Engine Environment
58.4 Clean Cab Air Filters
58.5 Check the Fuel Filters
58.6 Service Fuel Tank
58.7 Clean Screen on Filler Neck of DEF Tank
58.8 Check Filter of DEF Tank Vent
58.9 Cleaning Diesel Exhaust Fluid (DEF) Tank
59 Service ? Electrical System
59.1 Disconnect the Electrical Circuit of Battery
59.2 Access to the Battery
59.3 Access to Fuses
59.4 Fuse and Relay of Electrical Starting Aid
59.5 Fuse and Relay Box (PLB)
59.6 Fuses and Relays (LCS) (AutoPowr?/IVT? Transmission)
59.7 Check the Movement Inhibitor (AutoPowr?/IVT? Transmission)
59.8 Check Safety Device of PTO Actuation
59.9 Starter Motor
59.10 Check Engine Ground Connection
59.11 Light Test
59.12 Handling Halogen Bulbs Safely
59.13 Safe Maintenance and Cleaning
59.14 Replace Bulb of Low-Beam Headlight on Headlight in the Engine Hood
59.15 Replace Bulb of High-Beam Headlight on Headlight in the Engine Hood
59.16 Replace Bulb of Worklight in the Engine Hood
59.17 Replace Bulb of Worklights on Cab Frame, Cab Roof, or Rear Fender
59.18 Replace Bulb of Turn Signal and Clearance Lights on Cab Frame
59.19 Replace Bulb of Tail Brake Light/Turn Signal on Fender
59.20 Replace Bulb of Cab Lighting
59.21 Replace Bulb of Lighting of the Transmission Shift Unit
60 Service?Check Hardware Torques
60.1 Tighten Front-Wheel Bolts of Vehicles with Front-Wheel Drive Axles with 10-Bolt Circle
60.2 Tighten Wheel Bolts of the Rear Wheels with Flanged Axles with 10-Bolt Circle
60.3 Tighten Rear-Wheel Bolts?Rack-and-Pinion Axles, Hub Diameter 100 mm with Double Tapered Clamping Sleeves (6R 175 to 6R 250)
60.4 Tighten Screws of Wheel Weights
60.5 Tighten Screws of CAT III Drawbar
60.6 Tighten Screws of Trailer Hitch, Guide Rails
61 Service?Checks
61.1 Check Engine Oil Level
61.2 Check Engine Drive Belt for Wear
61.3 Check Viscous Fan of Cooling System
61.4 Check Coolant Level
61.5 Check Air Intake Hoses
61.6 Check Oil Level of Axle Housing on Front-Wheel Drive Axle (750 and 755)
61.7 Check Accumulator of Front Axle Suspension
61.8 Check Oil Level of Transmission/Hydraulic System
61.9 Check Leak-Off Oil Container (If Equipped)
61.10 Inspect Hydraulic Hoses
61.11 Check Closing Mechanisms and Rubber Seals of the Doors, Windows of Cab
61.12 Check Dust Prefilter of Cab
61.13 Inspect Seat Belt
61.14 Check Brakes
61.15 Bleed and Check the Brake System
61.16 Check Drawbar for Wear
62 Service ? Change
62.1 Replace Bulbs
62.2 Replace Engine Oil Filter
62.3 Change Engine Oil
62.4 Replace Filter of Oil Separator in Crankcase Vent (If Equipped)
62.5 Replace Engine Torsion Damper (6-Cylinder Engines Only)
62.6 Change Fuel Filter
62.7 Replace Engine Air Cleaner
62.8 Replace Secondary Element Engine Air Cleaner
62.9 Replace Cab Air Filters and Recirculation Air Filters
62.10 Replace Activated Carbon Filter of Cab Air Filter (If Equipped)
62.11 Change Coolant
62.12 Change Diesel Exhaust Fluid (DEF) Dosing Unit Filter
62.13 Installation Position of In-Line DEF Filter
62.14 Change Diesel Exhaust Fluid (DEF) In-Line Filter
62.15 Replace Diesel Particulate Filter (DPF)
62.16 Front-Wheel Drive Axle?Instructions on Changing Oil (Axle Housing and Final Drives)
62.17 Front-Wheel Drive Axle (750 and 755)?Change Oil of Final Drives with Brake
62.18 Front-Wheel Drive Axle (750 and 755)?Change Oil of Axle Housing
62.19 Electrical Hydraulic Pump Oil Change
62.20 Replace Transmission/Hydraulic Oil Filters,
62.21 Change Transmission/Hydraulic Oil and Clean Intake Screens (AutoPowr?/IVT? Transmission)
63 Service?Lubrication
63.1 General Information for Lubrication
63.2 Unscheduled Lubrication
63.3 Lubricate Tractor?Lubrication Points
63.4 Lubricate Rear PTO Stub Shaft Support
63.5 Grease Hinges of Windshield (Not with Glued Windshields)
64 Troubleshooting
64.1 Transmission
64.2 Hydraulic System
64.3 Selective Control Valves
64.4 Engine
64.5 Electrical System
64.6 Operator’s Cab
64.7 Premium Radio
65 Troubleshooting ? Diagnostic Trouble Codes and Customization
65.1 STOP, Service Alert, and Information Indicators
65.2 Access Diagnostic Trouble Codes
65.3 Access Diagnostic Addresses
66 Storage
66.1 Shutting Down for an Extended Period
66.2 Remove from Storage
67 Specifications
67.1 GENERAL INFORMATION
67.2 Note on Specifications
67.3 Machine Dimensions and Weights
67.4 Machine Technical Specifications
67.5 Capacities
67.6 Oil Withdrawal
67.7 Operating the Tractor in an Inclined Position
67.8 Loads and Weights
67.9 Vibration
67.10 Safety Note Regarding the Subsequent Installation of Electrical and Electronic Appliances and/or Components
67.11 Machine Design Life
67.12 China Emission Control Warranty Statement
68 Serial Numbers
68.1 Type Plates
68.2 Plate for Product Identification and Serial Numbers of Components
68.3 Plate for Product Identification Number (PIN)
68.4 Engine Serial Number
68.5 Transmission Serial Number
68.6 Differential with Final Drive Serial Number
68.7 Front-Wheel Drive Serial Number
68.8 Serial Number of Operator’s Cab
68.9 Serial Number of Operator’s Seat
68.10 Subassembly Serial Numbers
69 Change of Ownership
69.1 Record of Changes of Ownership
70 Predelivery Inspection
70.1 Notes on Pre-Delivery Inspection
70.2 Service Procedure
70.3 Machine Telematics Unit (MTU) Check
70.4 Copy for Owner
70.5 Copy for Dealer
71 Index
72 John Deere Service Keeps You On the Job
72.1 John Deere Parts
72.2 The Right Tools
72.3 Well-Trained Technicians
72.4 Prompt Service
