John Deere 6r 145, 6r 155, 6r 165, 6r 175 6r 185, 6r 195, And 6r 215 (my22 Operator Manuals OMAL234699

Table of Content:

1 Introduction
1.1 Foreword
1.2 Emissions Performance and Tampering
1.3 Download Instructions
2 Glossary
2.1 Glossary
2.2 Trademarks
3 Safety
3.1 Recognize Safety Information
3.2 Understand Signal Words
3.3 Follow Safety Instructions
3.4 Prepare for Emergencies
3.5 Wear Protective Clothing
3.6 Protect Against Noise
3.7 Handle Fuel Safely?Avoid Fires
3.8 Fire Prevention
3.9 In Case of Fire
3.10 Avoid Static Electricity Risk When Refueling
3.11 Use Foldable ROPS and Seat Belt Properly
3.12 Stay Clear of Rotating Drivelines
3.13 Use Steps and Handholds Correctly
3.14 Read Operator?s Manuals for ISOBUS Controllers
3.15 Use Seat Belt Properly
3.16 Vibration
3.17 Operating the Tractor Safely
3.18 Avoid Backover Accidents
3.19 Limited Use in Forestry Operation
3.20 Operating the Loader Tractor Safely
3.21 Keep Riders Off Machine
3.22 Passenger Seat
3.23 Use Safety Lights and Devices
3.24 Towing Trailers/Implements Safely
3.25 Use Caution on Slopes, Uneven Terrain, and Rough Ground
3.26 Freeing a Mired Machine
3.27 Avoid Contact with Agricultural Chemicals
3.28 Handle Agricultural Chemicals Safely
3.29 Handling Batteries Safely
3.30 Avoid Heating Near Pressurized Fluid Lines
3.31 Remove Paint Before Welding or Heating
3.32 Handle Electronic Components and Brackets Safely
3.33 Practice Safe Maintenance
3.34 Avoid Hot Exhaust
3.35 Clean Exhaust Filter Safely
3.36 Work In Ventilated Area
3.37 Support Machine Properly
3.38 Prevent Machine Runaway
3.39 Park Machine Safely
3.40 Transport Tractor Safely
3.41 Service Cooling System Safely
3.42 Service Accumulator Systems Safely
3.43 Service Tires Safely
3.44 Service Front-Wheel Drive Tractor Safely
3.45 Tightening Wheel Retaining Bolts/Nuts
3.46 Avoid High-Pressure Fluids
3.47 Do Not Open High-Pressure Fuel System
3.48 Store Attachments Safely
3.49 Decommissioning ? Proper Recycling and Disposal of Fluids and Components
4 Safety Signs
4.1 Pictorial Safety Signs
4.2 Operator’s Manual
4.3 Passengers on Tractors with Passenger Seat
4.4 Use Seat Belt Properly
4.5 Front Hitch Remote Control (If Equipped)
4.6 Rear Hitch Remote Control
4.7 Pickup Hitch
4.8 Cab Suspension Accumulators
4.9 Pressure Accumulator of the Front Hitch (Tractors without Triple-Link Suspension)
4.10 Pressure Accumulator of the Front Axle Suspension
4.11 Brake System Accumulator
4.12 Hydraulic Lines and Hydraulic Components?Front Hitch
4.13 Hydraulic Lines and Hydraulic Components?Rear Hitch
4.14 .
5 Vehicle Overview
5.1 Identification View
6 Operator’s Manual ? General Information
6.1 General Information and Scope of Manual
6.2 How to Use This Manual
6.3 Comply with Operator’s Manuals of Implement Manufacturers
7 Operating the Engine
7.1 EU Qualified Emergency Use ? SCR Derate Override Option
7.2 Important Engine Information
7.3 Engines with Turbocharger
7.4 Engine Protection
7.5 Required Machine Stop Warning
7.6 Access the Engine Menu
7.7 Check Engine Indicator Lights and Displays
7.8 Intelligent Power Management (Power Boost)
7.9 Starting the Engine
7.10 Engine Start with an Auxiliary Battery
7.11 Shutting Off the Engine
7.12 Battery Disconnect System (If Equipped)
7.13 Tow-Starting
7.14 Use Reversible Fan (If Equipped)
7.15 Fill the Fuel Tank
7.16 Fill the DEF Tank
8 Cold-Weather Operation
8.1 Cold Start Aids
8.2 Coolant Heater
8.3 Connecting the Coolant Heater to a 230 V Power Grid
8.4 Ground Fault Circuit Interrupter (GFCI), 120 V
9 Aftertreatment
9.1 Exhaust Filter Cleaning, General Information
9.2 Required Machine Stop Warning
9.3 Aftertreatment Indicators Overview
9.4 Access the Engine Menu
9.5 Exhaust Filter Cleaning Overview
9.6 AUTO Exhaust Filter Cleaning
9.7 Parked Exhaust Filter Cleaning
9.8 Exhaust Filter, Service Cleaning
9.9 Exhaust Cleaning System, Information for Operator
9.10 DEF (Diesel Exhaust Fluid) Level Gauge
9.11 Selective Catalytic Reduction (SCR) System Overview
10 Operator Controls
10.1 Vehicle Controls with AutoQuad? PLUS Transmission
10.2 Vehicle Controls with DirectDrive Transmission
10.3 Vehicle Controls with AutoPowr?/IVT? Transmission
10.4 Vehicle Controls with AutoPowr?/IVT? Transmission and CommandPRO? Joystick
10.5 Controls in the Side Console, Overview
10.6 Key Switch
10.7 Immobilizer
10.8 Secondary Brake System
10.9 Creeper Controls
10.10 PTO Controls
10.11 Economy Front Hitch Controls
10.12 Premium Front Hitch Controls
10.13 Rear Hitch Controls
10.14 Electronic Selective Control Valves (SCV), Controls
10.15 Mechanical Joystick (Factory Installed)
10.16 Electrical Joystick
10.17 Front-Wheel Drive Controls
10.18 Differential Lock Controls
10.19 Heating and Ventilation Controls
10.20 Radio A?Additional Radio Controls
10.21 Radio A?Additional Phone Controls
10.22 Touchscreen Radio?Additional Radio Controls
10.23 Touchscreen Radio?Additional Phone Controls
10.24 Intelligent Total Equipment (iTEC?), Controls
10.25 AutoTrac? Controls
10.26 ISOBUS Button (ISB)
11 Corner Post Display
11.1 Corner Post Display, Overview
11.2 Corner Post Display
11.3 Warning Indicators
11.4 Digital Indicators – Revolution Counter, Travel Speed, Transmission, and Set Speed
11.5 Gauges – Coolant Temperature, DEF Level, and Fuel Level
12 CommandARM? Controls
12.1 Controls with Variable Functions
12.2 Controls Setup?General Information (without CommandPRO? Joystick)
12.3 Controls Setup?General Information (with CommandPRO? Joystick)
12.4 Controls Setup?Assignment of Functions
12.5 Controls Setup?Independent Mode for Toggle Switch
12.6 Controls Setup?Resetting to Default
12.7 Controls Setup?Custom Settings (Settings Manager)
12.8 Lock Out the Button Functions with CommandPRO? Joystick
13 CommandCenter?
13.1 Generation 4 Display
13.2 Machine Settings Overview
13.3 Automation Status Overview
13.4 Navigate Generation 4 CommandCenter?
13.5 Compatible Displays
13.6 Power Display On and Off
13.7 Shortcut Buttons
13.8 Navigate to Display and Sound
13.9 Navigate to the Section Multiple Displays
13.10 Navigate to Date and Time
13.11 Navigate to Language and Units
13.12 Change Pages and Values
13.13 Navigate to Software Manager
13.14 Factory and Service ADVISOR? Installed Onscreen Help
13.15 Navigate to File Manager
13.16 Export Custom Tractor Settings
13.17 Import Custom Tractor Settings
13.18 Navigate to Settings Manger
13.19 Navigate to Diagnostics Center
13.20 Navigate to Users and Access
13.21 Navigate to Layout Manager
13.22 Navigate to Fields Page
13.23 Navigate to Equipment Manager
13.24 Navigate to Machine Monitor
13.25 Navigate to Work Monitor
13.26 Navigate to Maintenance and Calibrations
13.27 Radar Calibration
13.28 Wheel Slip Calibration
13.29 Navigate to Controls Setup
13.30 Controls
13.31 Controls Setup
13.32 Automation Status
13.33 Read ISOBUS Control Unit Operator?s Manual
13.34 Use Video Display Capability Properly
13.35 Navigate to Video Application
14 Radio A?Operation
14.1 Radio A?Controls and Instruments
14.2 Radio A?Additional Radio Controls
14.3 Radio A?Additional Phone Controls
14.4 Radio A?Microphone for Bluetooth Applications
14.5 Radio A?Auxiliary and USB Inputs
14.6 FM, MW, LW and DAB/DAB+-Compliant Radio Antenna (Europe Only)
15 Touchscreen Radio?Operation
15.1 Touchscreen Radio?Controls and Instruments
15.2 Touchscreen Radio?Additional Radio Controls
15.3 Touchscreen Radio?Additional Phone Controls
15.4 Touchscreen Radio?Microphone for Bluetooth Applications
15.5 Touchscreen Radio?Auxiliary and USB Inputs
15.6 FM, MW, LW and DAB/DAB+-Compliant Radio Antenna (Europe Only)
16 Guidance
16.1 AutoTrac? Steering System (If Equipped)
16.2 Variable Ratio Steering (If Equipped)
17 Intelligent Total Equipment Control (iTEC?)
17.1 iTEC? Controls and Functions (Side Console)
17.2 iTEC? Controls and Functions (CommandARM?)
17.3 CommandCenter? Pages Descriptions and Functions
17.4 Status Area
17.5 All Sequences Page
17.6 Add New Sequence
17.7 Sequence, Available Functions and Measures
17.8 Sequence Step Status
17.9 Edit or Remove Sequence
17.10 Sequence Sets Page
17.11 Perform Sequence
17.12 Recommendations (AutoLearn)
18 Tractor-Implement Management (TIM and TIA?)
18.1 TIM and TIA??Tractor-Implement Management (General)
18.2 TIM/TIA??Operator Controls
18.3 TIM/TIA??Activating the Implements
18.4 TIM/TIA??Requirements for Rear Hitch
18.5 TIM/TIA??Requirements for PTO
18.6 TIM/TIA??Requirements for Electronic Selective Control Valves (SCV)
18.7 TIM/TIA??Requirements for Guidance
18.8 TIM/TIA??Requirements for AutoPowr?/IVT?
18.9 TIM/TIA??Requirements for AutoPowr?/IVT? Transmission with CommandPRO? Joystick
18.10 TIM/TIA??Operating the Tractor-Implement Automation
19 Drivetrain
19.1 Drive Systems, Overview
20 Front-Wheel Drive
20.1 Front-Wheel Drive?Manual Engagement and Disengagement
20.2 Front-Wheel Drive?Automatic Engagement and Disengagement
20.3 Front-Wheel Drive?Smart MFWD (Optional)
20.4 Front-Wheel Drive?Automatic Disengagement Depending on the Steering Angle (Optional)
20.5 Tractor Equipped with Front Suspension Option
21 Differential Lock
21.1 Differential Lock?Manual Engaging/Disengaging
21.2 Differential Lock?Automatic Engaging/Disengaging
21.3 Differential Lock?Automatic Engaging/Disengaging via Custom Shutoff Angle (If Equipped)
22 Brakes
22.1 Brake System Compliance
22.2 Hydraulic Service Brakes
22.3 Secondary Brake System
22.4 Single-Line Hydraulic Trailer Brake (If Equipped)
22.5 Dual-Line Hydraulic Trailer Brake* (If Equipped)
22.6 Air Trailer Brake (If Equipped)
22.7 Trailer Brake Test
22.8 Socket for the Anti-Lock Brake System (ABS) of Trailer
22.9 Park the Tractor with AutoQuad? PLUS
22.10 Park the Tractor with DirectDrive
22.11 Park the Tractor with AutoPowr?/IVT?
22.12 Parking the Tractor with AutoPowr? and CommandPRO? Joystick
22.13 Chock Block
23 Transmission – General Information
23.1 Reduce Fuel Consumption
23.2 Selecting Correct Travel Speed
23.3 Notes on Changing to a Different Size of Tire
23.4 Transmission, Information on Maximum Speed
23.5 Engage Creeper Transmission
23.6 Switch the Backup Alarm ON or OFF (If Equipped)
23.7 Travel Speed Tables and SRI Values
23.8 Travel Speeds, AutoQuad? PLUS Transmissions for 40 km/h (20/20), on 6R 145, 6R 155, and 6R 165 Tractors?Tires with SRI 800
23.9 Travel Speeds, AutoQuad? PLUS Transmissions for 40 km/h (20/20), on 6R 145, 6R 155, and 6R 165 Tractors?Tires with SRI 825 and 875
23.10 Travel Speeds, AutoQuad? PLUS Transmissions for 40 km/h (20/20), on 6R 145, 6R 155, and 6R 165 Tractors?Tires with SRI 925 and 975
23.11 Travel Speeds, AutoQuad? PLUS Transmissions for 40 km/h (20/20), on 6R 175, 6R 195, and 6R 215 Tractors?Tires with SRI 925, 975, and 1025
23.12 Travel Speeds, AutoQuad? PLUS Transmission with EcoShift for 40 km/h (20/20), on 6R 145, 6R 155, and 6R 165 Tractors?Tires with SRI 800
23.13 Travel Speeds, AutoQuad? PLUS Transmission with EcoShift for 40 km/h (20/20), on 6R 145, 6R 155, and 6R 165 Tractors?Tires with SRI 825 and 875
23.14 Travel Speeds, AutoQuad? PLUS Transmission with EcoShift for 40 km/h (20/20), on 6R 145, 6R 155, and 6R 165 Tractors?Tires with SRI 925 and 975
23.15 Travel Speeds, AutoQuad? PLUS Transmission with EcoShift for 40 km/h (20/20), on 6R 175, 6R 195, and 6R 215 Tractors?Tires with SRI 925, 975, and 1025
23.16 Travel Speeds, AutoQuad? PLUS Transmission for 50 km/h (20/20), on 6R 145, 6R 155, and 6R 165 Tractors?Tires with SRI 800
23.17 Travel Speeds, AutoQuad? PLUS Transmission for 50 km/h (20/20), on 6R 145, 6R 155, and 6R 165 Tractors?Tires with SRI 825 and 875
23.18 Travel Speeds, AutoQuad? PLUS Transmission for 50 km/h (20/20), on 6R 145, 6R 155, and 6R 165 Tractors?Tires with SRI 925 and 975
23.19 Travel Speeds, AutoQuad? PLUS Transmission for 50 km/h (20/20), on 6R 175, 6R 195, and 6R 215 Tractors?Tires with SRI 925, 975, and 1025
23.20 Travel Speeds, DirectDrive Transmission for 40 km/h (24/24), on 6R 145, 6R 155, and 6R 165 Tractors?Tires with SRI 800, 825, 875, 925, and 975
23.21 Travel Speeds, DirectDrive Transmission for 50 km/h (24/24), on 6R 145, 6R 155, and 6R 165 Tractors?Tires with SRI 800, 825, 875, 925, and 975
23.22 Travel Speeds, DirectDrive Transmission for 40 km/h (24/24), on 6R 175, 6R 195, and 6R 215 Tractors?Tires with SRI 925, 975, and 1025
23.23 Travel Speeds, DirectDrive Transmission for 50 km/h (24/24), on 6R 175, 6R 195, and 6R 215 Tractors?Tires with SRI 925, 975, and 1025
24 AutoQuad? PLUS Transmission
24.1 AutoQuad? PLUS Transmission?Controls
24.2 AutoQuad? PLUS Transmission?Park Lock
24.3 AutoQuad? PLUS Transmission?Reverse Drive Lever
24.4 AutoQuad? PLUS Transmission?Range-Shift Lever
24.5 AutoQuad? PLUS Transmission?Gearshift Buttons
24.6 AutoQuad? PLUS Transmission?Clutch Pedal and Clutch Button
24.7 AutoQuad? PLUS Transmission?Automatic Gear Shifting
24.8 AutoQuad? PLUS Transmission?Speed Control Pedal and Hand Throttle
24.9 AutoQuad? PLUS Transmission?Cold-Weather Operation
24.10 AutoQuad? PLUS Transmission?Auto Mode
24.11 AutoQuad? PLUS Transmission?SoftShift
24.12 AutoQuad? PLUS Transmission?Reverse/Forward Ratio
24.13 AutoQuad? PLUS Transmission?Speed Matching
24.14 AutoQuad? PLUS Transmission?Start-Up Gear
24.15 AutoQuad? PLUS Transmission?PowrReverser?
24.16 AutoQuad? PLUS Transmission?Come-Home Mode
24.17 AutoQuad? PLUS Transmission?Tow the Tractor
24.18 Backup Alarm (If Equipped)
25 DirectDrive Transmission
25.1 DirectDrive Transmission?Controls
25.2 DirectDrive Transmission?Park Lock
25.3 DirectDrive Transmission?Reverse Drive Lever
25.4 DirectDrive Transmission?Range-Shift Unit
25.5 DirectDrive Transmission?Shift Lever
25.6 DirectDrive Transmission?Speed Control Pedal and Hand Throttle
25.7 DirectDrive Transmission?Brake Pedals
25.8 DirectDrive Transmission?Clutch Pedal
25.9 DirectDrive Transmission?Cold-Weather Starting
25.10 DirectDrive Transmission?Special Features when Maneuvering the Tractor
25.11 DirectDrive Transmission?Adjust Maximum Travel Set Speed
25.12 DirectDrive Transmission?Set Maximum Engine Speed
25.13 DirectDrive Transmission?Adjust Engine Set Speed
25.14 DirectDrive Transmission?Set Operating Mode
25.15 DirectDrive Transmission?Set Engine Speed Reduction (Custom Setting)
25.16 DirectDrive Transmission?Set Engine Droop (Custom Setting)
25.17 DirectDrive Transmission?Adjust Engine Speed for Additional Load Anticipation
25.18 DirectDrive Transmission?Set Reverse/Forward Speed Ratio
25.19 DirectDrive Transmission?AutoClutch Settings
25.20 DirectDrive Transmission?Set the Start Gear
25.21 DirectDrive Transmission?SoftShift when Changing Gears
25.22 DirectDrive Transmission?Customize Vehicle Behavior
25.23 DirectDrive Transmission?Operate with Trailer on Hillsides in Slippery Conditions
25.24 DirectDrive Transmission?Stop and Park the Tractor
25.25 DirectDrive Transmission?Come-Home Mode
25.26 DirectDrive Transmission?Tow the Tractor
25.27 Backup Alarm (If Equipped)
26 AutoPowr?/IVT? Transmission
26.1 AutoPowr?/IVT??Controls
26.2 AutoPowr?/IVT??Park Lock
26.3 AutoPowr?/IVT??Reverse Drive Lever
26.4 AutoPowr?/IVT??Speed Control Lever
26.5 AutoPowr?/IVT??Speed Control Pedal and Hand Throttle
26.6 AutoPowr?/IVT??Brake Pedals
26.7 AutoPowr?/IVT??Clutch Pedal
26.8 AutoPowr?/IVT??Special Features when Maneuvering the Tractor
26.9 AutoPowr?/IVT??Cold-Weather Starting
26.10 AutoPowr?/IVT??Set Travel Speed
26.11 AutoPowr?/IVT??Maximum Engine Speed
26.12 AutoPowr?/IVT??Set Operating Mode
26.13 AutoPowr?/IVT??Set Engine Speed Reduction (Custom Setting)
26.14 AutoPowr?/IVT??Set Engine Droop (Custom Setting)
26.15 AutoPowr?/IVT??Adjust Engine Speed for Additional Load Anticipation
26.16 AutoPowr?/IVT??Set Reverse/Forward Speed Ratio
26.17 AutoPowr?/IVT??AutoClutch Sensitivity
26.18 AutoPowr?/IVT??Operation on Hillsides in Slippery Conditions
26.19 AutoPowr?/IVT??Use Creeper Mode
26.20 AutoPowr?/IVT??Use Individual Brake Pedals
26.21 AutoPowr?/IVT??Speed Control Pedal Mode
26.22 AutoPowr?/IVT??Stop and Park the Tractor
26.23 AutoPowr?/IVT??Come-Home Mode
26.24 AutoPowr?/IVT??Tow the Tractor
26.25 Backup Alarm (If Equipped)
27 AutoPowr?/IVT? Transmission with CommandPRO? Joystick
27.1 CommandPRO? Joystick?Basic Functions
27.2 CommandPRO? Joystick?Park Lock
27.3 CommandPRO? Joystick?Start to Drive
27.4 CommandPRO? Joystick?Increase and Reduce Travel Speed
27.5 CommandPRO? Joystick?Change Direction of Travel
27.6 CommandPRO? Joystick?Change Travel Speed using the Speed Control Pedal
27.7 CommandPRO? Joystick?Comfort Function for Quick Adjustment of the Speed Control Pedal Range
27.8 CommandPRO? Joystick?Slow Forward and Reverse Travel
27.9 CommandPRO? Joystick?Triggering the Travel Speed
27.10 CommandPRO? Joystick?Maximum Speed/Stopping
27.11 CommandPRO? Joystick?Set the Characteristics for Increasing and Decreasing Travel Speed
27.12 CommandPRO? Joystick?Set and Store Travel Speeds (Travel Set Speed)
27.13 CommandPRO? Joystick?Limit Maximum Speed for Forward and Reverse Travel
27.14 CommandPRO? Joystick?Target Travel Speed when Changing Direction of Travel
27.15 CommandPRO? Joystick?Engine Speed / Hand Throttle Module
27.16 CommandPRO? Joystick?PTO Operation / Engine Speed Setting
27.17 CommandPRO? Joystick?Set the Operating Mode
27.18 CommandPRO? Joystick?Reset Custom Setting to Default
27.19 CommandPRO? Joystick?Set Engine Speed Increase (Custom Setting)
27.20 CommandPRO? Joystick?Set Engine Droop (Custom Setting)
27.21 CommandPRO? Joystick?Operating on Hillsides in Slippery Conditions
27.22 CommandPRO? Joystick?Use Creeper Mode
27.23 CommandPRO? Joystick?Use Individual Brake Pedals
27.24 CommandPRO? Joystick?Stop and Park the Tractor
27.25 CommandPRO? Joystick?Cold-Weather Starting
27.26 CommandPRO? Joystick?Come-Home Mode
27.27 CommandPRO? Joystick?Tow the Tractor
27.28 CommandPRO? Joystick?Assignment of Functions
27.29 CommandPRO? Joystick?Lock Out Functions
27.30 Backup Alarm (If Equipped)
28 PTO Shaft, Hitches, and Trailer Hitches
28.1 Hitch – Maximum Lifting Force
29 PTO Shaft – General Information
29.1 Front PTO?PTO Shield
29.2 Rear PTO?PTO Shield
29.3 None-Rotating PTO Guard
29.4 Operating Instructions
29.5 PTO Speeds
29.6 PTO Options
30 Front PTO
30.1 Front PTO
30.2 Engage and Disengage the Front PTO
30.3 Operate PTO with CommandPRO? Joystick
30.4 Front PTO?PTO Automatic Shutoff Function (If Equipped)
31 Rear PTO
31.1 Rear PTO
31.2 Engage and Disengage the Rear PTO
31.3 Operate PTO with CommandPRO? Joystick
31.4 Rear PTO?Select Standard Speed (Shiftable PTO)
31.5 Rear PTO?Fine Adjustment of PTO Speeds (Shiftable PTO)
31.6 Rear PTO?Remote Control and Function
31.7 Rear PTO?PTO Automatic Shutoff Function (If available)
31.8 Rear PTO?Change the PTO Stub Shaft
31.9 Rear PTO?Connect an Implement
32 Front Hitch
32.1 Economy Front Hitch Controls
32.2 Economy Front Hitch
32.3 Premium Front Hitch
32.4 Premium Front Hitch?Set Transport Position and Operating Depth
32.5 Premium Front Hitch?Set the Raise Height Limit
32.6 Premium Front Hitch?Set Rate-of-Drop
32.7 Premium Front Hitch?Set the Raise Rate
32.8 Premium Front Hitch?Activate Single-Acting Mode
32.9 Premium Front Hitch?Automatically Activate Float Position (with CommandPRO? Joystick)
32.10 Premium Front Hitch?Activate Float Position
32.11 Premium Front Hitch?Activate Float Position Automatically
32.12 Front Hitch?Center Link
32.13 Front Hitch?Center Link Positions
32.14 Front Hitch?Hook-Type Center Link
33 Rear Hitch
33.1 Rear Hitch?Operation without CommandARM?
33.2 Rear Hitch?Operation with CommandARM?
33.3 Rear Hitch?Settings and Functions in CommandCenter?
33.4 Rear Hitch?General Information on Electronic Hitch Sensing
33.5 Rear Hitch?Use the Depth Control Lever
33.6 Rear Hitch?Set Operating Depth
33.7 Rear Hitch?Use the Float Position
33.8 Rear Hitch?Set the Raise Height Limit
33.9 Rear Hitch?Adjust the Rate-of-Drop
33.10 Rear Hitch?Set the Raise Rate
33.11 Rear Hitch?Draft/Depth Control Adjustment
33.12 Rear Hitch?Use the Depth Control
33.13 Rear Hitch?Use Draft Control
33.14 Rear Hitch?Adjust Slip Sensitivity (If Equipped)
33.15 Rear Hitch?Set Locking Height of the Stabilizer Bar (If Equipped)
33.16 Rear Hitch?Driving under Load with Mounted Implement
33.17 Rear Hitch?Hitch Dampening
33.18 Rear Hitch?Remote Control
33.19 Rear Hitch?Direct Actuation
33.20 Three-Point Hitch
33.21 Telescopic Draft Links
33.22 Quick-Coupling (Hook-Type) Draft Links
33.23 Attach Three-Point Hitch Mounted and Drawn Implements
33.24 Leveling Implement
33.25 Center Link
33.26 Center Link Positions
33.27 Hook-Type Center Link
33.28 Hydraulic Center Link
33.29 EasyGuide? Center Link (If Equipped)
33.30 Hydraulic Center Link?Remote Control
33.31 Adjust Lift Links
33.32 Lift Links?Adjust for Vertical Float
33.33 Sway Blocks, Category II (If Equipped)
33.34 Sway Blocks, Category III/IIIN (If Equipped)
33.35 Stabilizer Bar (If Equipped)
33.36 Stabilizing System (If Equipped)
33.37 Draft Links?Adjust Spreading Dimension
33.38 Adjust Draft Links for Category III or IIIN (If Equipped)
33.39 Telescopic Draft Links?Convert Category III and IIIN (If Equipped)
33.40 Quick-Coupler?Set Category III and IIIN
33.41 Hydraulic Stabilizer Bars (If Equipped)
33.42 Adjust the Spreading Dimension on Hydraulic Stabilizer Bars
34 Trailer Hitches
34.1 Trailer Hitches?Foreword
34.2 CAT II Drawbar
34.3 CAT III Drawbar
34.4 Proper Use of Drawbar
34.5 Lock the Hitch Pins
34.6 Lock the Height-Adjustable Trailer Hitch
34.7 Latch for Telescopic Draft Links
34.8 Hitch Jaw
34.9 Trailer Hitch with Piton-Fix or Ball-Type (Rigid)
34.10 Height-Adjustable Ball-Type Hitch (Version 1)
34.11 Height-Adjustable Ball-Type Hitch (Version 2)
34.12 Height-Adjustable Trailer Hitch
34.13 Extendable Ball-Type Hitch (Not Available for All Models)
34.14 Remote Control for Trailer Hitch (If Equipped)
34.15 Hydraulic Pickup Hitch (Mechanically Actuated)
34.16 Hydraulic Pickup Hitch (Electrically Actuated)
35 Hydraulic System
35.1 Selective Control Valves (SCVs)?Maximum Permissible Oil Withdrawal (6R 145R, 6R 155, 6R 165, and 6R 185)
35.2 Selective Control Valves (SCVs)?Maximum Permissible Oil Withdrawal (6R 175, 6R 195, and 6R 215)
35.3 Using Large-Volume Hydraulic Cylinders
35.4 Additional Oil Reservoir (6R 145R, 6R 155, 6R 165, and 6R 185)
35.5 Additional Oil Reservoir (6R 175, 6R 195, and 6R 215)
36 Hydraulic Connections
36.1 Fittings of Selective Control Valves (SCVs)
36.2 Connect Hydraulic Hoses to SCVs
36.3 Disconnect Hydraulic Hoses from SCVs
36.4 Connect or Disconnect Hydraulic Hoses to or from SCVs at Front Hitch (If Equipped)
36.5 Hydraulic Connections for Implements and Hydraulic Motors
36.6 Connect Implements to SCVs
36.7 Adjustable Power Beyond Valve
37 Selective Control Valves (SCVs) – Controls
37.1 SCV Control Levers (Side Console)
37.2 SCV Control Levers (CommandARM?)
37.3 SCV Control Levers?Neutral Position
37.4 SCV Control Levers?Extend and Extend Click Position
37.5 SCV Control Levers?Retract and Retract Click Position
37.6 SCV Control Levers?Float Position (Detent)
38 Selective Control Valves (SCVs) – Settings
38.1 SCV Main Page
38.2 SCV?Activate/Deactivate Independent Mode
38.3 SCV?Set Flow Time
38.4 SCV?Set Flow Rate
38.5 SCV?Set Responsiveness
38.6 SCV?Activate/Deactivate Loader Mode
38.7 Operator Presence Sensor (For North America, Australia, and New Zealand Only)
39 Front Loader
39.1 Front Loader Mounting Frames for Loaders 640R/643R, 660R/663R, and 680R/683R
39.2 Front Loader?Hydraulic Quick Release (If Equipped)
39.3 Front Loader?Influence of Engine Speed on Lifting Function
39.4 Mechanical Joystick (Factory Installed)?Controls
39.5 Electrical Joystick?Controls
39.6 Electrical Joystick?Layout and Functions
39.7 Electrical Joystick?Idendify Software Version
39.8 Electrical Joystick (Only with Software until MY23.5)?Lock Function (Transport Lock)
39.9 Electrical Joystick with CommandARM? (Only with Software from MY23.5)?Lock Function (Transport Lock)
39.10 Electrical Joystick?Hand Presence Detection System, Error Message
39.11 Electrical Joystick?Setup of Controls
39.12 Electrical Joystick?Assign an SCV to a Motion Axis of the Joystick
40 Front Loader RTP ? Return-to-Position Function
40.1 RTP?Front Loader with Return-to-Position Function
40.2 RTP?Access the Return-to-Position Page
40.3 RTP?Return-to-Position Page (Functions)
40.4 RTP?Shortcut Keys and Run Page
40.5 RTP?Functions of the Joystick
40.6 RTP?Enable Use of the Function
40.7 RTP?Prepare the Joystick
40.8 RTP?Operate the Boom
40.9 RTP?Operate the Bucket
40.10 RTP?Select and Save an Implement
40.11 RTP?Set the Return-to-Position Function
40.12 RTP?Set the Responsiveness
41 Front Loader Functions RTP ? ESL and LTH
41.1 Front Loader Functions?Automatic Tool Alignment
41.2 ESL?Electronic Self-Leveling
41.3 LTH?Leveling to Horizon
42 Front Loader Function ? Dynamic Weighing System DWS
42.1 Front Loader Function?Dynamic Weighing System DWS
42.2 DWS?User Interface
42.3 DWS?Single Material and Material Groups
42.4 DWS?Select Type of Material
42.5 DWS?Set Tare Weight to Zero
42.6 DWS?Load without Target Weight Input
42.7 DWS?Joystick, Assign Function of Button
42.8 DWS?Load with Specification of Target Weight or Number of Units
42.9 DWS?Load a Material Group
42.10 DWS?Display During Loading
42.11 DWS?Load a Subset
42.12 DWS?Create and Save Single Materials
42.13 DWS?Create and Save Material Group
42.14 DWS?Overview of Measurements
43 Wheels and Tires
43.1 Tractor Models and Corresponding Axles?Overview, Tractors 6R 110 to 6R 250 (MY22- ) with Cab
43.2 Tires and Wheels?Foreword
43.3 General Wheel, Tire, and Tread Guidelines
43.4 Prevent Front Wheel or Fender Contact with Tractor Components
43.5 Change to a Different Tire Size
43.6 Changing the Tire Combination
43.7 Use of Dual Wheels (Easy-to-Attach)
43.8 Service Tires Safely
43.9 Change Wheels Safely
43.10 Wheel Exchange with Wheel Weights
43.11 Tire Combinations?Front-Wheel Drive Axle (6R 6145, 6R 155, 6R 165, and 6R 185)
43.12 Tire Combinations?Front-Wheel Drive Axle (6R 6175, 6R 195, and 6R 215)
43.13 Tire Labeling?Ascertain the Load Capacity of Tires
43.14 Tire Load Index
43.15 Tire Pressures
43.16 Tire Inflation Pressure Guidelines
43.17 Special Requirements for Very High Flexion (VF) Front Tires When Driving on Road
43.18 Special Requirements for 600/70R28 Tires on Tractors 6R 175, 6R 195 and 6R 215 with a Top Speed of 50 km/h
43.19 Select Tire Inflation Pressure
44 Front Wheels, Tires, and Tread Widths
44.1 Tires and Wheels?Foreword
44.2 Front Tires with Front-Wheel Drive
44.3 Front-Wheel Drive Axle?Toe-In Check and Adjustment
44.4 Front-Wheel Drive Axle?Check Toe-In (Conventional Method)
44.5 Front-Wheel Drive Axle?Check Toe-In Using a Laser Wheel-Measuring Tool
44.6 Front-Wheel Drive Axle?Adjust Toe-In
44.7 Instructions for Front-Wheel Tread Adjustment with Rims for 2, 8, and 16 Positions
44.8 Three-Piece Front Axle (Version 2)?Tread Widths for Front Wheels with Rims for 2 Positions (6R145, 6R 155, 6R 165, and 6R 185)
44.9 Three-Piece Front Axle (Version 2)?Tread Widths for Front Wheels with Rims for 2 Positions (6R 175, 6R 195, and 6R 215)
44.10 Three-Piece Front Axle (Version 2)?Tread Widths for Front Wheels with Rims for 8 Positions (6R145, 6R 155, 6R 165, and 6R 185)
44.11 Three-Piece Front Axle (Version 2)?Tread Widths for Front Wheels with Rims for 8 Positions (6R 175, 6R 195, and 6R 215)
44.12 Three-Piece Front Axle (Version 2)?Tread Widths for Front Wheels with Rims for 16 Positions (6R145, 6R 155, 6R 165, and 6R 185)
44.13 Three-Piece Front Axle (Version 2)?Tread Widths for Front Wheels with Rims for 16 Positions (6R 175, 6R 195, and 6R 215)
45 Steering Stop and Fender ? Settings
45.1 Adjust Fenders
45.2 Three-Piece Front Axle (Version 2)?Identify Axle Type
45.3 Notes on Adjusting the Fenders
45.4 Three-Piece Front Axle (Version 2)?Notes on Adjusting the Steering Stop (750 and 755)
45.5 Three-Piece Front Axle (Version 2)?Adjust the Fixed Fenders and Steering Stop (750) Part 1
45.6 Three-Piece Front Axle (Version 2)?Adjust the Fixed Fenders and Steering Stop (750) Part 2
45.7 Three-Piece Front Axle (Version 2)?Adjust the Pivoting Fenders and Steering Stop (750) Part 1
45.8 Three-Piece Front Axle (Version 2)?Adjust the Pivoting Fenders and Steering Stop (750) Part 2
46 Rear Wheels, Tires, and Tread Widths
46.1 Tires and Wheels?Foreword
46.2 Instructions for Rear Wheel Tread Adjustment with Rims for 2, 8, and 16 Positions (Flanged Axle)
46.3 Tread Widths for Rear Wheels with Rims for 2 Positions?Flanged Axles (6R 145, 6R 155, 6R 165, and 6R 185)
46.4 Tread Widths for Rear Wheels with Rims for 2 Positions?Flanged Axles (6R 175, 6R 195, and 6R 215)
46.5 Tread Widths for Rear Wheels with Rims for 2 Positions, Heavy-Duty Type?Flanged Axles (6R 145, 6R 155, 6R 165, and 6R 185)
46.6 Tread Widths for Rear Wheels with Rims for 2 Positions, Heavy-Duty Type?Flanged Axles (6R 175, 6R 195, and 6R 215)
46.7 Tread Widths for Rear Wheels with Rims for 8 Positions?Flanged Axles (6R 145, 6R 155, 6R 165, and 6R 185)
46.8 Tread Widths for Rear Wheels with Rims for 8 Positions?Flanged Axles (6R 175, 6R 195, and 6R 215)
46.9 Tread Widths for Rear Wheels with Rims for 16 Positions?Flanged Axles (6R 145, 6R 155, 6R 165, and 6R 185)
46.10 Tread Widths for Rear Wheels with Rims for 16 Positions?Flanged Axles (6R 175, 6R 195, and 6R 215)
46.11 Tread Widths for Rear Wheels with Rims for 16 Positions, Heavy-Duty Type?Flanged Axles (6R 145, 6R 155, 6R 165, and 6R 185)
46.12 Steel Adjustable Wheels in Combination with Adjustable Rear Axles
46.13 Notes on Rear Wheels?Rack-and-Pinion Axles, Hub Diameter 86, 92, and 100 mm with Single Tapered Clamping Sleeves
46.14 Rack-and-Pinion Axles, Hub Diameter 86, 92, and 100 mm with Single Tapered Clamping Sleeves?Adjust Tread Widths for Cast Rear Wheels
46.15 Rack-and-Pinion Axles, Hub Diameter 86, 92, and 100 mm with Single Tapered Clamping Sleeves?Adjust Tread Widths for Steel Rear Wheels (with Adjusting Pinion)
46.16 Rack-and-Pinion Axles, Hub Diameter 86, 92, and 100 mm with Single Tapered Clamping Sleeves?Adjust Tread Widths for Steel Rear Wheels (without Adjusting Pinion)
46.17 Tread Widths for Rear Wheels with Rims for 2 Positions?Rack-and-Pinion Axles (6R 145, 6R 155, 6R 165, and 6R 185)
46.18 Tread Widths for Rear Wheels with Rims for 2 Positions?Rack-and-Pinion Axles (6R 175, 6R 195, and 6R 215)
46.19 Tread Widths for Rear Wheels with Rims for 2 Positions, Heavy-Duty Type?Rack-and-Pinion Axles (6R 145, 6R 155, 6R 165, and 6R 185)
46.20 Tread Widths for Rear Wheels with Rims for 2 Positions, Heavy-Duty Type?Rack-and-Pinion Axles (6R 175, 6R 195, and 6R 215)
47 Operator