John Deere 6100e, 6110e, 6115e, 6125e, 6130e, 6105eh And 6120eh Tier 0-tier Iii Tractors Operator Manuals OMSU65826

Table of Content:

1 General Information
1.1 Product View
1.2 Trademarks
1.3 Glossary of Terms
1.4 Regions and Country Versions
1.5 Machine Overview
2 Safety Precautions
2.1 Recognize Safety Information
2.2 Understand Signal Words
2.3 Follow Safety Instructions
2.4 Prepare for Emergencies
2.5 Wear Protective Clothing
2.6 Protect Against Noise
2.7 Handle Fuel Safely-Avoid Fires
2.8 Handle Starting Fluid Safely
2.9 Fire Prevention
2.10 In Case of Fire
2.11 Avoid Static Electricity Risk When Refueling
2.12 Keep ROPS Installed Properly
2.13 Use Foldable ROPS and Seat Belt Properly
2.14 Stay Clear of Rotating Drivelines
2.15 Use Steps and Handholds Correctly
2.16 Read Operator?s Manuals for ISOBUS Controllers
2.17 Use Seat Belt Properly
2.18 Operating the Tractor Safely
2.19 Avoid Backover Accidents
2.20 Limited Use in Forestry Operation
2.21 Operating the Loader Tractor Safely
2.22 Keep Riders Off Machine
2.23 Instructional Seat
2.24 Use Safety Lights and Devices
2.25 Transport Towed Equipment at Safe Speeds
2.26 Use Caution on Slopes, Uneven Terrain, and Rough Ground
2.27 Freeing a Mired Machine
2.28 Avoid Contact with Agricultural Chemicals
2.29 Handle Agricultural Chemicals Safely
2.30 Handling Batteries Safely
2.31 Avoid Heating Near Pressurized Fluid Lines
2.32 Remove Paint Before Welding or Heating
2.33 Handle Electronic Components and Brackets Safely
2.34 Practice Safe Maintenance
2.35 Avoid Hot Exhaust
2.36 Clean Exhaust Filter Safely
2.37 Work In Ventilated Area
2.38 Support Machine Properly
2.39 Prevent Machine Runaway
2.40 Park Machine Safely
2.41 Transport Tractor Safely
2.42 Service Cooling System Safely
2.43 Service Accumulator Systems Safely
2.44 Service Tires Safely
2.45 Service Front-Wheel Drive Tractor Safely
2.46 Tightening Wheel Retaining Bolts/Nuts
2.47 Avoid High-Pressure Fluids
2.48 Do Not Open High-Pressure Fuel System
2.49 Store Attachments Safely
2.50 Decommissioning – Proper Recycling and Disposal of Fluids and Components
3 Safety Signs
3.1 Replace Safety Signs
3.2 Operator’s Manual Safety Sign
3.3 Use Seat Belt Safety Sign
3.4 Riders Safety Sign
3.5 ROPS in Normal Position Safety Sign
4 Controls and Instruments
4.1 Front Console Controls
4.2 Right-Hand Console Controls
4.3 Left-Hand Console Controls
4.4 Instrument Cluster and Information Display
4.5 Information Display (Roll Mode Switch)
5 Engine Operation
5.1 Before Starting the Engine
5.2 Operate Key Switch
5.3 Start the Engine
5.4 Cold Weather Start
5.5 Engine Coolant Heater
5.6 Check Engine Indicators and Gauges
5.7 Change Engine Speeds
5.8 Recommended Engine Speeds and Operational Procedures
5.9 Stop the Engine
6 Air Intake, Fuel, Coolant, and Exhaust Operation
6.1 Fill Fuel Tank
7 Electrical and Lighting Operation
7.1 Light Switch-Tier 0 and Tier 1
7.2 Light Switch-Tier 3
7.3 Use Headlights
7.4 High Beam Indicator
7.5 Use Work Lights
7.6 Use Tail Lights
7.7 Use Warning Lights
7.8 Use Turn Signals
7.9 Use Rotating Beacon Light-If Equipped
7.10 Use License Plate Light
7.11 Route Cables and Harnesses
7.12 Use Dome Light
7.13 Use Courtesy Light
7.14 Use Seven-Terminal Outlet
7.15 Accessory Electrical Outlets
8 Drivetrain Operation
8.1 Gear Selection
9 Transmission Operation
9.1 Operate Transmission
9.2 Operate Transmission-PR
9.3 Shift Transmission
9.4 Use Infinitely Variable Shuttle
9.5 Stop Tractor
9.6 Creeper Operation
10 MFWD and Front Axle Operation
10.1 Operate MFWD
11 Differential and Rear Axle Operation
11.1 Differential Lock
12 Power Take Off (PTO) Operation
12.1 Change Reversible PTO Stub Shaft
12.2 Attach PTO-Driven Implement
12.3 Operate Tractor PTO
13 Steering and Brake Operation
13.1 Steering Stop Adjustment (MFWD Axle)
13.2 Use Brakes
14 Hydraulics Operation
14.1 Open Center Hydraulic System
14.2 Warm Hydraulic System Oil
15 Hitch and Drawbar Operation
15.1 3-Point Hitch Components
15.2 Prepare Implement
15.3 Rockshaft Control Levers
15.4 Use Rockshaft Position Control
15.5 Set Position Control Lever Stop
15.6 Use Draft Control
15.7 Adjust Rockshaft Rate-of-Drop
15.8 Attach Implements to 3-Point Hitch
15.9 Attach Implement with Telescoping Draft Links
15.10 Adjust Hitch Side Sway
15.11 Level Hitch
15.12 Adjust Lateral Float
15.13 Observe Drawbar Load Limitations
15.14 Adjust Drawbar Length
15.15 Adjust Drawbar Side-to-Side
15.16 Use Clevis Assembly
16 Selective Control Valve Operation
16.1 Connecting Cylinder Hoses
16.2 Connect or Disconnect High-Pressure Hoses
16.3 Connect Cylinder Hoses-Rear SCV
16.4 Connect Cylinder Hoses-Mid-Mount Valve
16.5 Connect and Operate Single-Acting Cylinder
16.6 Rear SCV Control Lever and Coupler Identification
16.7 Mid-Mount SCV Control Lever Identification
16.8 Mid-Mount Valve Coupler Identification
16.9 Operate SCV Control Levers-Single or Two-Function Valve
16.10 Set Detents and Operate SCV Control Levers-Three-Function Deluxe Valve
16.11 Use Rear SCV to Operate Hydraulic Motor
16.12 Operate Multi-Function Lever
16.13 Adjust Flow Control-Triple Rear SCV
16.14 Match Tractor Power to Implement
17 Wheels and Tires Operation
17.1 Check Implement-to-Tire Clearance
17.2 Tire Sidewall Information
17.3 Select Tire Inflation Pressure
17.4 Tire Inflation Pressure Guidelines
17.5 Check Tire Inflation Pressure
17.6 Front and Rear Tire Combinations-2WD
17.7 Front and Rear Tire Combinations-MFWD
17.8 Selecting Front Tire Rolling Direction
17.9 Changing to a Different Tire Size
17.10 Calculate Tire Combinations (Graphic)
17.11 Tighten Wheel/Axle Hardware Correctly
17.12 Tighten Bolts-Rear Axle
17.13 Tighten Bolts-Adjustable Front Axle, 2WD
17.14 Tighten Bolts-MFWD Axle
17.15 Tread Settings-Adjustable Front Axle, 2WD
17.16 Tread Settings-MFWD Axle
17.17 Tread Settings-Multi-Position Rear Wheels (Steel Disks)
17.18 Adjust Front Wheel Tread-2WD
17.19 Check Toe-In-Adjustable Front Axle, 2WD
17.20 Adjust Toe-In-Adjustable Front Axle, 2WD
17.21 Check Toe-In-MFWD Axle
17.22 Front Fender-MFWD Axle
18 Ballasting
18.1 Plan for Maximum Productivity
18.2 Select Ballast Carefully
18.3 Determine Maximum Front Ballast
18.4 Determine Maximum Rear Ballast
18.5 Add Rear Ballast for Front Loader
18.6 Use Cast Iron Weights
18.7 Use Liquid Weights
18.8 Use Implement Codes
19 Additional Equipment
19.1 Additional Equipment Operation
19.2 Front Loader Mounting Bracket
19.3 Ag Precision Technology
20 Operator Station Operation
20.1 Operate Foldable Roll-Over Protective Structure (ROPS)
20.2 Operator Manual Storage Compartment
20.3 Use Seat Belt
20.4 Adjust Seat-Deluxe
20.5 Adjust Seat-Mechanical Suspension
20.6 Adjust Seat-Air Suspension
20.7 Adjust Steering Wheel
20.8 Sun Roof
20.9 Front Sun Shade
20.10 Emergency Exit-Fixed Right-Hand Door
20.11 Use Emergency Exit
20.12 Open Windows
20.13 Open Door
20.14 Inside Rear View Mirror and Sun Visor
20.15 Adjust Blower Speed
20.16 Control Temperature
20.17 Deice, Demist, or Defrost Windshield
20.18 Optimize Air Conditioner and Heater Performance
20.19 Operate Windshield Wiper and Washer
20.20 Operate Rear Window Wiper and Washer
20.21 Operate Radio (AM/FM)
20.22 Operate Radio with Compact Disc Player
20.23 Operate Compact Disc Player
20.24 Set Clock
20.25 Use Monitor Mounts
21 Transport and Storage
21.1 Operator Training Required
21.2 Observe Maximum Travel Speeds
21.3 Driving on Public Roads
21.4 Driving Tractor on Roads
21.5 Transporting on Carrier
21.6 Towing Tractor
21.7 Use Caution on Hillsides
21.8 Place Tractor in Long-Term Storage
21.9 Remove Tractor from Storage
21.10 Paint Finish Care
22 Maintenance Intervals
22.1 Important Considerations
22.2 Practice Safe Maintenance
22.3 Service Interval Chart
22.4 Service Tractor Safely
22.5 Observe Service Intervals
22.6 Daily Service Before Start-Up
22.7 Additional Service Information
23 Fuels, Lubricants, and Coolants
23.1 Alternative and Synthetic Lubricants
23.2 Transmission and Hydraulic Oil
23.3 Testing Coolant Freeze Point
23.4 John Deere COOL-GARD? II Coolant Extender
23.5 Water Quality for Mixing with Coolant Concentrate
23.6 Diesel Engine Coolant (engine with wet sleeve cylinder liners)
23.7 Operating in Warm Temperature Climates
23.8 Diesel Engine Oil – Non-Emissions Certified and Certified Tier 1 and Stage I
23.9 Diesel Engine Oil – Tier 3 and Stage IIIA
23.10 Diesel Engine Break-In Oil – Non-Emissions Certified and Certified Tier 1, Tier 2, Tier 3, Stage I, Stage II, and Stage III
23.11 Extended Diesel Engine Oil Service Intervals – Non-Emissions Certified and Certified Tier 1 and Stage I
23.12 Engine Oil and Filter Service Intervals-Tier 3 and Stage IIIA – PowerTech? Engines
23.13 Mixing of Lubricants
23.14 Oil Filters
23.15 Fuel Filters
23.16 Storing Fuel
23.17 Fuel Cleanliness
23.18 Diesel Fuel
23.19 Minimizing the Effect of Cold Weather on Diesel Engines
23.20 Handling and Storing Diesel Fuel
23.21 Handling and Storing Diesel Fuel
23.22 Lubricity of Diesel Fuel
23.23 Testing Diesel Fuel
23.24 Gear Oil
23.25 Multipurpose Extreme Pressure (EP) Grease
23.26 Multipurpose Grease
23.27 Mixing of Lubricants
23.28 Lubricant Storage
23.29 Transmission, Steering, Brake, Hydraulic, and Gear Case Oil
23.30 Oilscan? and CoolScan?
23.31 Cold Weather Operation
23.32 Hot Weather Operation
23.33 Diesel Fuel
23.34 Lubricity of Diesel Fuel
23.35 Testing Diesel Fuel
23.36 Alternative and Synthetic Lubricants
23.37 Lubricant Storage
23.38 Diesel Engine Break-In Oil – Non-Emissions Certified and Certified Tier 1, Tier 2, Tier 3, Stage I, Stage II, and Stage III
23.39 Diesel Engine Oil – Tier 2 and Stage II
23.40 Oil Filters
23.41 Diesel Engine Coolant (engine with wet sleeve cylinder liners)
23.42 Liquid Coolant Conditioner
23.43 Transmission and Hydraulic Oil
23.44 Use Correct Transmission/Hydraulic Filter Element
23.45 MFWD Axle and Wheel Hub Oil
23.46 Multipurpose Extreme Pressure (EP) Grease
24 As Required Maintenance
24.1 As Required Maintenance
24.2 Wash Machine After Unloading
25 Controls and Instruments Maintenance
25.1 Controls and Instruments Maintenance
25.2 Clutch Pedal Considerations
26 Engine Maintenance
26.1 Engine Operation-Break-In Check
26.2 Break-In Service-During First 10 Hours of Operation
26.3 Break-In Check-After First 50 Hours of Operation
26.4 Break-In Check-After First 100 Hours of Operation
26.5 Open Hood
26.6 Check Engine Idle Speeds
26.7 Engine Valve Adjustment
26.8 Use Correct Lubricant
26.9 Check Engine Oil Level
26.10 Change Engine Oil and Filter
26.11 Engine Oil Filter Change-If Equipped with Loader Frames
26.12 Lubricate Hood Latch
26.13 Clean Engine Compartment
26.14 Replace Engine Crankshaft Vibration Damper
27 Air Intake, Fuel, Coolant, and Exhaust Maintenance
27.1 Inspect Engine Air Intake Filters
27.2 Use High-Pressure Washer
27.3 Replace Engine Air Intake Filters-Primary and Secondary
27.4 Inspect Engine Air Intake System
27.5 Tighten Hose Clamps
27.6 Clean Engine Crankcase Vent Tube
27.7 Do Not Modify Fuel System
27.8 Drain Water and Sediment from Fuel Filters
27.9 Drain Water and Sediment from Fuel Tank
27.10 Replace Prefilter / Water Separator
27.11 Replace Primary Fuel Filter / Water Separator
27.12 Check Coolant Level
27.13 Check Cooling System for Leaks
27.14 Flush Cooling System and Replace Thermostat
27.15 Bleed Fuel System
27.16 Clean Front Grille, Side Screens, Radiator, Condenser (Cab), and Coolers
28 Electrical and Lighting Maintenance
28.1 Electrical Service Precautions
28.2 Use a Booster Battery or Charger
28.3 Inspect Alternator/Fan Belt Tensioner
28.4 Replace Alternator/Fan Belt
28.5 Access Battery
28.6 Charge Battery
28.7 Clean Battery
28.8 Check Battery Condition
28.9 Remove Battery
28.10 Battery Replacement Specifications
28.11 Service Battery
28.12 Access Fuses and Relays
28.13 Load Center Fuses and Relays-OOS (Tier 0)
28.14 Load Center Fuses and Relays-OOS (Tier 3)
28.15 Load Center Fuses and Relays-Cab (Tier 0)
28.16 Load Center Fuses and Relays-Cab (Tier 3)
28.17 Fusible Link Location
28.18 Starter Wiring Connections
28.19 Handle Halogen Light Bulbs Safely
28.20 Replace Headlight Element
28.21 Adjust Headlights
28.22 Replace Roof Hazard Light Bulb-Cab
28.23 Replace Hazard Light Bulb-OOS
28.24 Replace Tail and Turn Light Bulbs-OOS
28.25 Replace Tail and Turn Light Bulbs-Cab
28.26 Replace Worklight Element-OOS
28.27 Replace Worklight Element-Cab
28.28 Replace Dome Light Bulb-Cab
28.29 Replace Controls Illumination Light Bulb-Cab
28.30 Replace Rotary Beacon Light Bulb
29 Drive Train Maintenance
29.1 Check Neutral Start System
30 Transmission Maintenance
30.1 Check Hydraulic System Oil Level
30.2 Change Hydraulic System Oil
30.3 Replace Hydraulic System Oil Filter
31 MFWD and Front Axle Maintenance
31.1 Lubricate Front Axle Pivot Pins
31.2 Lubricate MFWD Axle Shaft
31.3 Lubricate Front Wheel Bearings (2WD)
31.4 Check MFWD Axle Wheel Hub Oil Level
31.5 Change MFWD Axle Wheel Hub Oil
31.6 Check MFWD Axle Housing Oil Level
31.7 Change MFWD Axle Housing Oil
32 Differential and Rear Axle Maintenance
32.1 Lubricate Rear Axle Bearings
32.2 Change High Crop Rear Axle Oil
33 Power Take Off (PTO) Maintenance
33.1 Lubricate PTO Stub Shaft
34 Steering and Brake Maintenance
34.1 Lubricate Steering Linkage
34.2 Adjust Brake Pedal Free Travel
34.3 Check and Adjust Secondary Brake Lever
35 Hydraulics Maintenance
35.1 Hydraulic Maintenance
35.2 Warm Hydraulic System Oil
36 Hitch and Drawbar Maintenance
36.1 Lubricate Hitch Components
37 Selective Control Valve Maintenance
37.1 Check Selective Control Valve
38 Wheels and Tires Maintenance
38.1 Service Tires Safely
38.2 Inspect Tractor for Loose Hardware
38.3 Inspect Tires
38.4 Tubeless Tire Repair
39 Ballasting Maintenance
39.1 Measure Wheel Slip-Manually
39.2 Install Rear Cast Iron Weights
39.3 Ballasting Front End for Transport
40 Additional Equipment Maintenance
40.1 Additional Equipment Maintenance
40.2 Check Front Loader Mounting Bracket Cap Screws Torque
41 Operator Station Maintenance
41.1 Keep Cab Protection System Installed Properly
41.2 Inspect Roll Over Protective Structure (ROPS) for Loose Hardware
41.3 Lubricate Operator’s Seat Slide Rails-OOS
41.4 Inspect Seat Belt
41.5 Clean Cab Air Filters
41.6 Service Air Conditioner-Cab
41.7 Adjust Hand Throttle Friction-Tier 0 Engine
42 Troubleshooting
42.1 Engine Troubleshooting
42.2 Electrical System Troubleshooting
42.3 Transmission Troubleshooting
42.4 Rockshaft and 3-Point Hitch Troubleshooting
42.5 Brakes Troubleshooting
42.6 Hydraulic System Troubleshooting
42.7 Selective Control Valves (SCV) Troubleshooting
42.8 Remote Hydraulic Cylinder Troubleshooting
42.9 Heater and A/C System (Cab) Troubleshooting
42.10 Wipers, Worklights, Dome Light, and Radio (Cab) Troubleshooting
43 On-Board Diagnostics (OBD)
43.1 STOP and Service Alert Indicators
43.2 On-Board Diagnostic (OBD) Tool
43.3 Diagnostic Trouble Code (DTC) Mode
43.4 Diagnostic Address (DA) Mode
44 Specifications
44.1 General Specifications
44.2 Certificate ? OCIMA
44.3 Overall Dimensions and Weights
44.4 Tires Sizes
44.5 Turning Radius-MFWD Axle
44.6 Turning Radius-2WD Axle
44.7 Estimated Vehicle Speed, PR with Creeper
44.8 Ground Speed
44.9 Metric Bolt and Screw Torque Values
44.10 Unified Inch Bolt and Screw Torque Values
45 Identifications Numbers
45.1 Identification Numbers
45.2 Product Identification Number
45.3 MFWD Axle Serial Number
45.4 Engine Serial Number
45.5 Fuel Injection Pump Serial Number
45.6 Cab Serial Number
45.7 Transaxle Serial Number
45.8 Keep Proof of Ownership
46 Certification and Warranty
46.1 Limited Battery Warranty
47 Service Records
47.1 Daily / 10 Hour Service Record
47.2 Weekly / 50 Hour Service Record
47.3 First 100 Hour Service Record
47.4 250 Hour Service Record
47.5 500 Hour Service Record
47.6 1000 Hour / Annual Service Record
47.7 2000 Hour / Two Year Service Record
47.8 3000 Hour / Three Year Service Record
47.9 5000 Hour / Five Year Service Record
47.10 As Required Service Record
48 Pre-Delivery Inspection
48.1 Notes on Pre-Delivery Inspection
48.2 Service Procedure
48.3 Copy for Owner
48.4 Copy for Dealer
49 Index