John Deere 9009A TerrainCut Rough Mower Operator Manual OMUC24993

Table of Content:

1 Introduction
1.1 Thank You for Purchasing a John Deere Product
1.2 Professional Use Only
1.3 Emissions Performance and Tampering
1.4 Using Your Operator’s Manual
1.5 Machine Use
1.6 Special Messages
1.7 Attachments for Your Machine
1.8 Service Literature
1.9 Parts
2 Contents
3 Product Identification
3.1 Record Identification Numbers
4 Safety Labels without Text
4.1 Safety Label Location
4.2 Understanding the Machine Safety Labels without Text
4.3 Avoid Injury From Crushing
4.4 Avoid Injury from Equipment Fires
4.5 Avoid Injury From Exposure to Loud Noise
4.6 Read Operator’s Manual
4.7 Avoid Injury From Thrown Objects
4.8 Avoid Injury From Tipping
4.9 Avoid Injury From Rotating Blades
5 Safety
5.1 Operator Training Required
5.2 Preparation
5.3 Operating Safely
5.4 Maintenance and Storage
5.5 Checking Mowing Area
5.6 Parking Safely
5.7 Rotating Blades Are Dangerous
5.8 Protect Children
5.9 Avoid Tipping
5.10 Avoid Injury From Drawbar
5.11 Use Seat Belt Properly
5.12 Keep ROPS Installed Properly
5.13 Keep Riders Off
5.14 Driving Safely on Public Roads
5.15 Checking Wheel Hardware
5.16 Wear Appropriate Clothing
5.17 Avoid High Pressure Fluids
5.18 Prevent Fires
5.19 Tire Safety
5.20 Handling Fuel Safely
5.21 Handling Waste Product and Chemicals
6 Machine Cleanout
6.1 General Cleaning Guidelines
6.2 Cleanout Areas
7 Operating Controls
7.1 Operator Station Controls
8 Operating Machine
8.1 Daily Operating Checklist
8.2 Avoid Damage to Plastic and Painted Surfaces
8.3 Understanding the TechControl Display
8.4 Understanding the TechControl Display Main Menu
8.5 Understanding Mode Icon
8.6 Understanding Machine Fault Diagnostic Icon
8.7 Understanding DTC Diagnostic Icon
8.8 Understanding Diesel Particulate Filter (DPF) Regeneration
8.9 Exhaust Filter System Overview
8.10 Active Regeneration
8.11 Inhibiting Active Regeneration
8.12 Parked Regeneration
8.13 Parked Regeneration Interlock Notification Pop-Ups
8.14 Recovery Regeneration
8.15 Starting Notifications
8.16 TechControl Display Setup
8.17 Using the Hour Meter
8.18 Using Key Switch
8.19 Using Seat Belt
8.20 Adjusting Seat
8.21 Adjusting Command Arm
8.22 Using Park Brake
8.23 Using Tilt Steering
8.24 Safety Interlock System
8.25 Starting The Engine
8.26 Using Pre-Heater
8.27 Warming and Idling Engine
8.28 Stopping Engine
8.29 Testing Safety Systems
8.30 Testing Safety System – Starting Engine
8.31 Testing Safety System – Engine Running
8.32 Using Mow-Transport (PTO) Switch
8.33 Using Lift-Lower Lever
8.34 Emergency Stopping
8.35 Using Travel Pedals
8.36 Using Cruise Control
8.37 Using Fuel Shutoff Valve
8.38 Transporting Machine
8.39 Driving Mower to Work Site
8.40 Moving Machine Manually
9 Operating Cutting Units
9.1 Using the TechControl for Mower Setup
9.2 Engaging Cutting Units
9.3 Emergency Stopping—Cutting Units
9.4 Adjusting Blade Rake
9.5 Mowing Tips
9.6 Cutting Taller Grass
9.7 Cutting Shorter Grass
9.8 Cleaning Cutting Units
10 Service Intervals
10.1 Servicing Your Machine
10.2 Before Each Use
10.3 After Each Use
10.4 Break-In (After First 5 Hours)
10.5 Break-In (After First 50 Hours)
10.6 Every 50 Hours
10.7 Every 250 Hours
10.8 Every 500 Hours or Yearly
10.9 Every 750 Hours or Yearly
10.10 Every 1000 Hours or Yearly
10.11 Every 2000 Hours or 24 Months
10.12 Service Intervals After Converting to Bio HyGard
11 Service Lubrication
11.1 Grease
11.2 Grease Locations—Machine
11.3 Grease Locations—Lift Arms and Lift Cylinders
11.4 Grease Locations—Rotary Deck
12 Service Engine
12.1 Engine Faults
12.2 Carbon Dioxide Emissions (CO₂)
12.3 Aftertreatment Indicators Overview
12.4 Diesel Particulate Filter Diagnostic Trouble Codes
12.5 Diesel Engine Oil — Final Tier 4, Stage IIIB, and Stage V
12.6 Avoid Fumes
12.7 Raising Hood
12.8 Raising and Lowering Seat
12.9 Checking Engine Oil Level
12.10 Changing Engine Oil and Filter
12.11 Checking Air Restriction Indicator
12.12 Changing Primary Air Cleaner Element
12.13 Changing Secondary Air Cleaner Element
12.14 Cleaning Dust Unloading Valve
12.15 Cleaning under Hood and Seat
12.16 Cleaning Radiator and Oil Cooler
12.17 Service Cooling System Safely
12.18 Diesel Engine Coolant
12.19 Service Cooling System
12.20 Checking Radiator Hoses and Clamps
12.21 Changing Fuel Filter
12.22 Priming Diesel Fuel System
12.23 Checking Water Separator Bowl
12.24 Fuel Injection Pump
12.25 Servicing Alternator-Fan Belt
13 Service Transmission
13.1 Hydraulic Oil Faults
13.2 Transmission and Hydraulic Oil
13.3 Converting From HY-GARD to BIO HY-GARD
13.4 Biodegradable Oil
13.5 Service Safely
13.6 Checking and Adding Hydraulic Oil
13.7 Changing Hydraulic Oil and Filter
13.8 Changing Hydraulic Oil Strainer
14 Service Cutting Units
14.1 Avoid Injury from Contacting Blades
14.2 Removing and Installing Blades
14.3 Removing and Installing Front and Rear Rollers
14.4 Adjusting Rotary Deck Height-of-Cut (HOC)
14.5 Adjusting Rear Roller to Discharge Chute Gap
14.6 Check and Adjust Height-of-Cut (HOC) Latch Free-Play
14.7 Height-of-Cut (HOC) Lever Service
14.8 Removing and Installing Cutting Units
14.9 Sharpening Blades
14.10 Balancing Blades
15 Service Electrical
15.1 Service the Battery Safely
15.2 Battery Voltage Faults
15.3 Cleaning Battery and Terminals
15.4 Checking Battery Electrolyte Level
15.5 Using Booster Battery
15.6 Removing and Installing Battery
15.7 Replacing Fuses
16 Service Miscellaneous
16.1 TechControl Service Menu
16.2 Diesel Fuel
16.3 Biodiesel Fuel
16.4 Filling Fuel Tank
16.5 Checking Tire Pressure
16.6 Checking and Adjusting Toe-In
16.7 Cleaning Plastic Surfaces
16.8 Cleaning and Repairing Metal Surfaces
17 Troubleshooting
17.1 Using Troubleshooting Chart
17.2 Engine
17.3 Electrical System
17.4 Steering
17.5 Cutting Units
17.6 Blade Selection
17.7 Diagnostic Trouble Codes (DTC) List
18 Storage
18.1 Storing Safety
18.2 Preparing Machine for Storage
18.3 Preparing Fuel and Engine For Storage
18.4 Removing Machine From Storage
18.5 Storage for BioDiesel Fuel
19 Specifications
19.1 Engine
19.2 Drivetrain and Travel Speeds
19.3 Electrical System
19.4 Fuel System
19.5 Steering and Brakes
19.6 Tires
19.7 Capacities
19.8 Dimensions
19.9 Weights
19.10 Torque Values
19.11 Recommended Lubricants
19.12 Sound Measurements
19.13 Vibration Measurements
20 Declaration of Conformity
20.1 EC Declaration of Conformity
21 John Deere Quality Statement
21.1 John Deere Quality
22 Service Records
22.1 Record Service Dates
23 Index