John Deere 8rt Series Tractors Operator Manuals OMRE597275

Table of Content:

1 Introduction
1.1 Foreword
1.2 Emissions Performance and Tampering
1.3 Trademarks
2 Glossary
2.1 Glossary of Terms
3 Safety
3.1 Recognize Safety Information
3.2 Understand Signal Words
3.3 Follow Safety Instructions
3.4 Prepare for Emergencies
3.5 Wear Protective Clothing
3.6 Protect Against Noise
3.7 Handle Fuel Safely?Avoid Fires
3.8 Handle Starting Fluid Safely
3.9 Fire Prevention
3.10 In Case of Fire
3.11 Avoid Static Electricity Risk When Refueling
3.12 Keep ROPS Installed Properly
3.13 Use Foldable ROPS and Seat Belt Properly
3.14 Stay Clear of Rotating Drivelines
3.15 Use Steps and Handholds Correctly
3.16 Read Operator?s Manuals for ISOBUS Controllers
3.17 Use Seat Belt Properly
3.18 Operating the Tractor Safely
3.19 Avoid Backover Accidents
3.20 Limited Use in Forestry Operation
3.21 Operating the Loader Tractor Safely
3.22 Keep Riders Off Machine
3.23 Instructional Seat
3.24 Use Safety Lights and Devices
3.25 Transport Towed Equipment at Safe Speeds
3.26 Use Caution on Slopes, Uneven Terrain, and Rough Ground
3.27 Freeing a Mired Machine
3.28 Avoid Contact with Agricultural Chemicals
3.29 Handle Agricultural Chemicals Safely
3.30 Handling Batteries Safely
3.31 Avoid Heating Near Pressurized Fluid Lines
3.32 Remove Paint Before Welding or Heating
3.33 Handle Electronic Components and Brackets Safely
3.34 Practice Safe Maintenance
3.35 Avoid Hot Exhaust
3.36 Clean Exhaust Filter Safely
3.37 Work In Ventilated Area
3.38 Support Machine Properly
3.39 Prevent Machine Runaway
3.40 Park Machine Safely
3.41 Transport Tractor Safely
3.42 Service Cooling System Safely
3.43 Service Accumulator Systems Safely
3.44 Service Tires Safely
3.45 Service Front-Wheel Drive Tractor Safely
3.46 Tightening Wheel Retaining Bolts/Nuts
3.47 Avoid High-Pressure Fluids
3.48 Do Not Open High-Pressure Fuel System
3.49 Store Attachments Safely
3.50 Decommissioning ? Proper Recycling and Disposal of Fluids and Components
4 Safety Signs
4.1 Operator’s Manual
4.2 Seat Belt
4.3 Track Accumulators
4.4 Engine Cooling System (For China Only)
4.5 Rear Hitch (If Equipped for China Only)
4.6 Rear PTO (If Equipped for China Only)
5 Vehicle Overview
5.1 8RT Series Tractor
6 Engine Operation
6.1 Engine Settings?Access
6.2 Engine Settings
6.3 Engine Settings?Engine Power
6.4 Engine Settings?Engine Set Speed
6.5 Engine Settings?Max Engine Speed
6.6 Engine Settings?Exhaust Filter System Overview
6.7 Engine Settings?AUTO Exhaust Filter Cleaning
6.8 Engine Settings?Disable AUTO Exhaust Filter Cleaning
6.9 Engine Settings?Parked Filter Cleaning
6.10 Required Machine Stop Warning
6.11 Engine Fuel System and Power Rating
6.12 Battery Disconnect Switch
6.13 Start the Engine
6.14 Theft Deterrent Systems
6.15 Run the Engine
6.16 Stop the Engine
6.17 Restart Engine That Has Run Out of Fuel
6.18 Reduce Fuel Consumption
6.19 Battery Booster or Charger
7 Cold Weather Operation
7.1 Cold Weather Starting?Without Starting Aid
7.2 Cold Weather Starting?With Starting Aid
7.3 Change Starting Fluid Canister
7.4 Auxiliary Heaters Use
8 Emissions Equipment
8.1 Aftertreatment Indicators Overview
8.2 Selective Catalytic Reduction (SCR) System Overview
8.3 Diesel Particulate Filter (DPF) Service
9 Front Console
9.1 Front Console
9.2 Adjust Steering Wheel and Column
9.3 Operate Horn
9.4 Operate Wipers and Washers
9.5 Key Switch
9.6 Operate Turn Signals
9.7 Pedals
9.8 Operate Lights
10 Corner Post Display
10.1 Corner Post Display
11 CommandARM? Controls
11.1 CommandARM?
11.2 CommandARM? Hitch Controls
11.3 CommandARM? SCV Control Levers
11.4 CommandARM? PTO Control Levers
11.5 CommandARM? Climate, Radio, and Lighting Controls
11.6 Push-To-Talk (PTT)
11.7 CommandARM? Controls?Left Side
11.8 CommandARM? Secondary Brake Lever
11.9 CommandARM? Joystick
11.10 CommandARM? Navigation Bar
11.11 Adjust CommandARM? Position
12 CommandCenter?
12.1 Generation 4 Display
12.2 Machine Settings Overview
12.3 Automation Status Overview
12.4 Navigate Generation 4 CommandCenter?
12.5 Compatible Displays
12.6 Power Display On and Off
12.7 Change Pages and Values
12.8 Factory and Service ADVISOR? Installed Onscreen Help
12.9 Radar Calibration
12.10 Slip Calibration
12.11 Steering Settings?Access
12.12 Steering Settings
12.13 Steering Settings?Manual Steering Sensitivity
12.14 Steering Settings?Advanced
12.15 Controls Setup
12.16 Automation Status
12.17 Install Video Display Camera
13 CommandCenter? Audio and Phone
13.1 External Sources
13.2 Select Audio Source with Generation 4 CommandCenter?
13.3 AM/FM Home Page
13.4 USB Home Page
13.5 Bluetooth? Home Page
13.6 Auxiliary Home Page
13.7 Pair Bluetooth? Device to Generation 4 CommandCenter?
13.8 Manage Paired Bluetooth? Devices
13.9 Phone Operation
13.10 Contact List
13.11 Recent Calls
13.12 Clear Favorites and Call History
14 Intelligent Total Equipment Control (iTEC?)
14.1 CommandARM? Control Functions
14.2 iTEC? Station Description
14.3 CommandCenter? Pages Descriptions and Functions
14.4 Status Area
14.5 All Sequence Page
14.6 Add New Sequence
14.7 Sequence Step Status
14.8 Edit or Remove Sequence
14.9 Sequence Sets Page
14.10 Perform Sequence
14.11 Recommendations (AutoLearn)
14.12 iTEC Functions?IVT?/AutoPowr? Transmission
14.13 iTEC? Functions?Efficiency Manager?
15 Tractor-Implement Automation (TIA)
15.1 Tractor-Implement Automation (TIA)
15.2 Activate Tractor-Implement Automation (TIA) Equipment
15.3 Tractor-Implement Automation (TIA) ? Status Page
15.4 Operate Tractor-Implement Automation (TIA)
15.5 PTO Requirements
15.6 SCV Requirements
15.7 IVT?/AutoPowr? Requirements
15.8 IVT?/AutoPowr? with CommandPRO? Joystick Requirements
15.9 PowerShift? Transmission Requirements
15.10 AutoTrac? Guidance Requirements
15.11 Rear Hitch Requirements
15.12 Drive Strategy Requirements
16 Drivetrain
16.1 Drivetrain Overview
17 Brakes
17.1 Trailer Brake System Settings?Access
17.2 Trailer Brake System Settings
17.3 Trailer Brake System Settings?Brake Gain
17.4 Trailer Brake System Settings?Pre-Brake Offset
17.5 Trailer Brake System Settings?Trailer Brake Test
17.6 Trailer Brake System Settings?Advanced
17.7 Brake Use
17.8 AutoClutch
17.9 Trailer Brakes Regulation (EAEU-compliant Tractors Only)
17.10 Hydraulic Trailer Brakes
18 Transmission – General Information
18.1 Transmission Settings?Access Advanced
18.2 Transmission Settings?Advanced
18.3 Warm-Up Transmission-Hydraulic System
18.4 Backup Alarm
19 e23? Transmission
19.1 Operate Transmission?e23?
19.2 Shift Transmission?e23?
19.3 e23? Set Speeds and Efficiency Manager?
19.4 e23? Transmission Settings?Access
19.5 e23? Transmission Settings
19.6 e23? Transmission Settings?Mode
19.7 e23? Transmission Settings?Custom
19.8 e23? Transmission Settings?Droop
19.9 e23? Transmission Settings?ECO
19.10 e23? Transmission Settings?Max Speeds
20 IVT?/AutoPowr? Transmission
20.1 Operate Transmission?IVT?
20.2 Shift Transmission?IVT?
20.3 IVT? Set Speeds
20.4 IVT? Transmission Settings?Access
20.5 IVT? Transmission Settings
20.6 IVT? Transmission Settings?Mode
20.7 IVT? Transmission Settings?Pedal Mode
20.8 IVT? Transmission Settings?Custom
20.9 IVT? Transmission Settings?Droop
20.10 IVT? Transmission Settings?ECO
20.11 IVT? Transmission Settings?Max Speeds
21 IVT?/AutoPowr? Transmission with CommandPRO? Joystick
21.1 Operate Transmission?IVT? with CommandPRO? Joystick
21.2 Shift Transmission?IVT? with CommandPRO? Joystick
21.3 CommandPRO? Joystick
21.4 CommandPRO? Joystick?Acceleration/Deceleration Response
21.5 CommandPRO? Joystick?Enable Set Speeds
21.6 CommandPRO? Joystick?Adjust Travel Direction
21.7 CommandPRO? Joystick?Stopping
21.8 CommandPRO? Joystick?Operating on Hillsides
21.9 CommandPRO? Transmission Settings?Access
21.10 CommandPRO? Transmission Settings
21.11 CommandPRO? Transmission Settings?Mode
21.12 CommandPRO? Transmission Settings?Custom
21.13 CommandPRO? Transmission Settings?Droop
21.14 CommandPRO? Transmission Settings?Minimum Engine Speed
21.15 CommandPRO? Transmission Settings?Set Speeds
21.16 CommandPRO? Transmission Settings?Shuttle Shift Speeds
21.17 CommandPRO? Transmission Settings?Speed Limits
22 PTO, Hitch, and Drawbar
22.1 Attaching PTO-Driven Implement
22.2 PTO, Hitch, and SCV Remote Switches
22.3 Implement Guidelines
23 PTO – General Information
23.1 PTO Settings?Access
23.2 PTO Settings
23.3 PTO Settings?Advanced
23.4 PTO Settings?Engagement Rate
23.5 PTO Settings?Rear PTO Cruise
23.6 PTO Settings?Auto Disengage
23.7 Operating Instructions
23.8 Operate PTOs
23.9 External PTO Switches
23.10 Select Correct Engine Speed
24 Rear PTO
24.1 Rear PTO Shield
25 Rear Hitch
25.1 Hitch Lift Capacities
25.2 Rear Hitch Settings?Access
25.3 Rear Hitch Settings
25.4 Rear Hitch Settings?Upper Limit
25.5 Rear Hitch Settings?Drop Rate
25.6 Rear Hitch Settings?Raise Rate
25.7 Rear Hitch Settings?Load Depth
25.8 Rear Hitch Settings?Slip Sensitivity
25.9 Rear Hitch Settings?Position
25.10 Rear Hitch Settings?Advanced
25.11 Rear Hitch Settings?Position Control
25.12 Rear Hitch Settings?Draft Control
25.13 Hitch Control Lever Adjustments
25.14 Hitch Depth Set Point
25.15 Float Operation
25.16 Hitch Components
25.17 Rear Hitch Remote Switches
25.18 Draft Link Storage Position
25.19 Hitch Manual Lowering
25.20 Correct Center Link Position
25.21 Using Sway Blocks
25.22 Attach Implement to Quick-Hitch
25.23 Adjusting Implement Level
25.24 Adjust Lateral Float
25.25 Detaching Implement from Quick-Hitch
25.26 Converting Category 4N/3 Convertible Quick-Hitch Lower Hooks
25.27 Converting Category 4N/3 Convertible Quick-Hitch Upper Hook
26 Drawbar
26.1 Drawbar Load Limitations
26.2 Scraper Applications
26.3 Calculate Static Vertical Drawbar Load
26.4 Calculate Vertical Drawbar Load Distance Behind Rear Axle
26.5 Adjust Drawbar Length, Height, and Side-to-Side
27 Hydraulics – General Information
27.1 Hydraulic System Overview
28 Selective Control Valves
28.1 SCV Settings?Access
28.2 SCV Settings
28.3 SCV Settings?Standard Mode
28.4 SCV Settings?Independent Mode
28.5 SCV Settings?Feature Mode
28.6 SCV Settings?Flow Adjustment
28.7 SCV Settings?Time Adjustment
28.8 SCV Settings?Advanced
28.9 SCV Settings?Activating Independent Mode
28.10 SCV Settings?Automation
28.11 SCV Settings?Assignment
28.12 SCV Settings?Flow Adjustment Sensitivity
28.13 SCV Control Lever Adjustments
28.14 Total SCV Flow
28.15 Operate SCVs with CommandARM? Joystick
28.16 CommandARM? Joystick?Layout and Joystick Lever Functions
29 Hydraulic Connections
29.1 Connect/Disconnect Hydraulic Hoses
29.2 Component Identification and Location
29.3 Using Load-Sensing Hydraulic System?Power-Beyond
29.4 Examples Using Load-Sensing Hydraulic System?Power-Beyond
29.5 Using Hydraulic Spray Pumps
29.6 Using Hydraulic Motor Return
29.7 Using Hydraulic Motor Case Drain
29.8 Implement Connection Example 1?Pressure Control Valve Applications (Grain Drills or Air Seeders with Constant Down-Pressure System)
29.9 Implement Connection Example 2?Motor Application Using Motor Case Drain
29.10 Implement Connection Example 3?Motor Application Using SCV Retract and Auxiliary Motor Return
29.11 Implement Connection Example 4?Planter with Vacuum Motor and Return Line to SCV Using Motor Return Tip
29.12 Implement Connection Example 5?Planter with Vacuum Motor, Return Line to Motor Return and Lift Assist
29.13 Implement Connection Example 6?Planter with Vacuum Motor and Return Line to Motor Return
29.14 Using Implements Requiring Large Volumes of Oil
30 TouchSet? Depth Control
30.1 TouchSet? Depth Control Settings and Adjustments
30.2 Connect/Disconnect the Implement Position Connector
31 Laser Scraper Control
31.1 Laser Scraper?Scrapers Equipped with Scraper Control Unit
32 Tracks – General Information
32.1 General Track Use Guidelines
32.2 Tracks Service
33 Seats
33.1 Adjust Air Seat
33.2 Operator Presence Sensor
33.3 Adjust Instructional Seat
34 Mirrors
34.1 Adjust Mirrors
35 Lights
35.1 Light Identification
35.2 Lights Settings?Access
35.3 Lights Settings
35.4 Lights Settings?Field Lights Presets
35.5 Lights Settings?Hood/Belt Line Lights
35.6 Lights Settings?Advanced
35.7 Hazard and Extremity Lights
35.8 Trailering Lights
35.9 Beacon Light
35.10 7-Pin Outlet (Version A Lighting)
35.11 7-Pin Outlet (Version B Lighting)
36 Accessories
36.1 Right-Hand Side Console
36.2 CommandARM? Storage
36.3 Right-Hand Front Corner Post
36.4 Left-Hand Rear Corner Post
36.5 Right-Hand Rear Corner Post
36.6 Refrigerator and Cool/Storage Box
36.7 Sunshade
36.8 Storage Compartments
36.9 Monitor Bracket Mounts
36.10 Emergency Exit
36.11 Install Business Band/Citizens Band (CB) Antenna and/or Radio
36.12 Mount StarFire? Receiver
36.13 Mount RTK (Real-Time Kinematic) Radio
36.14 Implement Connector
36.15 RS232 Serial Communication Connection
37 HVAC
37.1 HVAC Settings?Access
37.2 HVAC Settings
37.3 HVAC Settings?Climate Control Automation
37.4 HVAC Settings?Set Temperature
37.5 HVAC Settings?Air Flow Mode
37.6 HVAC Settings?Fan Speed
37.7 HVAC Settings?Air Conditioning
38 Performance Ballasting
38.1 How to Calculate Permissible Towed Mass
38.2 General Ballasting Information
38.3 General Guidelines
38.4 General Weight Split Guidelines
38.5 Ballast Options
38.6 Measure Slip
38.7 Quik-Tatch? Weight Use
38.8 Idler Weight Use
38.9 Mounted Spray Tank Use
38.10 Calculate Tractor Ballast Package
38.11 Unballasted Tractor Weight Chart
38.12 Implement and Tractor Codes
39 Transport
39.1 Driving Tractor on Roads
39.2 Transporting
39.3 Towed Mass
39.4 Towing Loads
39.5 Tow Points
39.6 Tow Tractor
39.7 Tow Mode
39.8 Come Home Mode
39.9 Emergency Brake Steering
39.10 Carrier Transport
39.11 Freeing a Mired Tractor
40 Fuel, Lubricants, and Coolant – General Information
40.1 Determine Tractor Engine Type
40.2 Minimizing the Effect of Cold Weather on Diesel Engines
40.3 Oil Filters
41 Fuel
41.1 Diesel Fuel
41.2 Supplemental Diesel Fuel Additives
41.3 Biodiesel Fuel
41.4 Lubricity of Diesel Fuel
41.5 Handling and Storing Diesel Fuel
41.6 Fill Fuel Tank
41.7 Testing Diesel Fuel
41.8 Fuel Filters
42 Diesel Exhaust Fluid (DEF)
42.1 Diesel Exhaust Fluid (DEF) ? Use in Selective Catalytic Reduction (SCR) Equipped Engines
42.2 Storing Diesel Exhaust Fluid (DEF)
42.3 Refilling Diesel Exhaust Fluid (DEF) Tank
42.4 Fill DEF Tank
42.5 Testing Diesel Exhaust Fluid (DEF)
42.6 Disposal of Diesel Exhaust Fluid (DEF)
43 Engine Oil
43.1 Diesel Engine Oil Service Interval for Operation at High Altitude
43.2 Diesel Engine Break-In Oil ? Non-Emissions Certified and Certified Tier 1, Tier 2, Tier 3, Stage I, Stage II, and Stage III
43.3 Diesel Engine Oil ? Tier 2 and Stage II
43.4 Engine Oil and Filter Service Intervals ? Tier 2 and Stage II Engines
43.5 Diesel Engine Oil ? Tier 3 and Stage IIIA
43.6 Engine Oil and Filter Service Intervals ? Tier 3 and Stage III A ? PowerTech? Plus Engines
43.7 John Deere Break-In Plus? Engine Oil ? Interim Tier 4, Final Tier 4, Stage IIIB, Stage IV, and Stage V
43.8 Diesel Engine Oil ? Interim Tier 4, Final Tier 4, Stage IIIB, Stage IV, and Stage V
43.9 Engine Oil and Filter Service Intervals ? Interim Tier 4, Final Tier 4, Stage IIIB, Stage IV, and Stage V Engines
44 Engine Coolant
44.1 Diesel Engine Coolant (engine with wet sleeve cylinder liners)
44.2 Operating in Warm Temperature Climates
44.3 Water Quality for Mixing with Coolant Concentrate
44.4 Testing Coolant Freeze Point
44.5 Disposing of Coolant
45 Other Lubricants
45.1 Mixing of Lubricants
45.2 Alternative and Synthetic Lubricants
45.3 Lubricant Storage
45.4 Transmission and Hydraulic Oil
45.5 Mid-Frame Roller Oil
45.6 Gear Oil
45.7 Multipurpose Extreme Pressure (EP) Grease
45.8 Corn Head Grease
46 Service – General Information
46.1 Service Sections Overview
46.2 Service Tasks Performed As Required
46.3 Identify Tractor Engine Emissions Status
46.4 Open Hood
46.5 Access Battery Compartment
46.6 Remove Cab Rear Panel
46.7 Jack Up the Tractor – Lifting Points and Support Stand Placement
46.8 Service and Connect STC? (Snap-to-Connect) Fittings
46.9 High-Pressure Washer Use
46.10 Do Not Modify Fuel System
46.11 Bleed Fuel System
46.12 Identify Zinc-Flake Coated Fasteners
46.13 Unified Inch Bolt and Screw Torque Values
46.14 Metric Bolt and Screw Torque Values
47 Service – Break-In (100 Hours or Less)
47.1 Perform Break-In Services
47.2 Perform Track Systems Break-In
48 Service – Record Charts
48.1 Service Record Chart Overview
48.2 Service Interval Chart
48.3 Service Record Chart
49 Service – Clean
49.1 Access DEF Tank Drain Plug
49.2 Cleaning Diesel Exhaust Fluid (DEF) Tank
49.3 Tractor Exterior
49.4 Air Intake Valve
49.5 Clean Display
49.6 Clean Seat
49.7 Engine Cooling System
49.8 Dual Beam Radar Sensor
49.9 Suspension Compressor Filter, Compressor, and Air Bag
49.10 Hydraulic Oil Suction Screen
50 Service – Check
50.1 Windshield Washer Fluid Level
50.2 Engine Coolant Level
50.3 Coolant Freeze Point
50.4 Water Separator
50.5 Optional Fuel Water Separator (If Equipped)
50.6 Engine and Exhaust Compartments
50.7 Air Conditioning System
50.8 Engine Water Pump Weep Hole – Tier 2/Stage II or Tier 3/Stage IIIA Engines
50.9 Engine Water Pump Weep Hole – Final Tier 4/Stage V Engine
50.10 Fuel Tank Sump
50.11 Engine Oil Level
50.12 Transmission-Hydraulic Oil Level
50.13 Cab Suspension Components
50.14 Engine Air Intake System?Tier 2/Stage II
50.15 Engine Air Intake System?Tier 3/Stage IIIA Engine
50.16 Engine Air Intake System?Final Tier 4/Stage V Engine
50.17 Seat Belts
50.18 Auxiliary Drive Belt and Drive Belt Tensioner
50.19 Track Tension
50.20 Tread Settings
50.21 Track Adjustment
50.22 Align Track
50.23 Walking Beam Bumper Stops
50.24 Drive Wheel Hub Housing Oil Level
50.25 Mid-Rollers Oil Level
50.26 Idler Wheel Hub Oil Level
50.27 Mid-Rollers, Drive, and Idler Wheels
50.28 Track Wear
50.29 Trash Build-Up
50.30 Walking Beam Air Suspension System
50.31 Drive Wheel And Walking Beam Settings?Narrow Tread
50.32 Drive Wheel And Walking Beam Settings?Standard and Wide Tread
50.33 Engine Valve Clearance
50.34 Secondary Brake System
50.35 NEUTRAL Start System
50.36 Transmission PARK System
50.37 Drawbar Wear
51 Service – Tighten
51.1 Drive Wheel, Drive Wheel Sleeve, Wedges, Idler, and Mid-Roller Cap Screws
52 Service – Change
52.1 Engine Oil and Filter
52.2 Fuel Filters
52.3 Optional Fuel Water Separator Filter Element (If Equipped)
52.4 Cab Recirculation Air Filter
52.5 Cab Fresh Air Filter
52.6 Engine Primary and Secondary Air Filters
52.7 Transmission-Hydraulic Oil and Filters
52.8 Fuel Tank Vent Filter
52.9 SCV Pilot Valve Filter
52.10 Auxiliary Drive Belt
52.11 Chain Drive Oil
52.12 Walking Beam Bumper Stops
52.13 Front Suspension Air Compressor Inlet Filter
52.14 Steering Filter
52.15 Differential Oil
52.16 IVT?/AutoPowr? and e23?Transmissions-Hydraulic Oil
52.17 DEF Tank Vent Filter
52.18 Access In-Line DEF Filter
52.19 Change Diesel Exhaust Fluid (DEF) In-Line Filter
52.20 Access DEF Dosing Unit Filter
52.21 Change Diesel Exhaust Fluid (DEF) Dosing Unit Filter
52.22 Transmission Torsional Damper
52.23 Engine Crankshaft Damper
52.24 Engine Coolant
52.25 Remove and Install Track
53 Service – Lubricate
53.1 Rear Hitch
53.2 Draft Link Support Shaft Bushing
53.3 Track Tension Cylinders
54 Service – Electrical
54.1 Service – Electrical Overview
54.2 Welding Near Electronic Control Units
54.3 Keep Electronic Control Unit Connectors Clean
54.4 Compressed Air Use
54.5 High-Pressure Washers Use
54.6 Disconnect Battery
54.7 Service Batteries and Connectors
54.8 Access Load Center Fuses
54.9 Access Front Load Center
54.10 Access Master Fuses
54.11 Access Implement Power Relay Module Fuses
54.12 Handle Halogen Light Bulbs Safely
54.13 Change Halogen Bulbs
54.14 Change Front LED Headlight Assembly
54.15 Aim Halogen High-Beam Headlights
54.16 Aim Halogen Headlights
54.17 Aim LED High Beam Headlights
54.18 Aim LED Headlights
54.19 Aim Headlights
54.20 Change Auxiliary Driving Light
54.21 Change Wrap-Around Cab Light
54.22 Change Cab Roof Light
54.23 Change Rear Fender Light?Rear Indicator
54.24 Change Extremity Light?Cab
54.25 Change Cab Dome Light
55 Troubleshooting – Procedures
55.1 Perform Troubleshooting Process
55.2 Engine
55.3 Transmission
55.4 Hydraulic System
55.5 Hitch
55.6 Selective Control Valve (SCV)
55.7 TouchSet Depth Control
55.8 Electrical System
55.9 Operator Enclosure
55.10 Steering System
56 Troubleshooting – Diagnostic Trouble Codes (DTC)
56.1 STOP, Service, and Information Alerts on CommandCenter?
56.2 Access Diagnostic Trouble Codes
57 Service – Storage
57.1 Place Tractor in Storage
57.2 Remove Tractor from Storage
58 Specifications
58.1 Engine
58.2 Capacities
58.3 Hydraulic System
58.4 Transmission and Power Train
58.5 Hitch, Drawbar, and PTO
58.6 Electrical System
58.7 Integrated Technology
58.8 Overall Dimensions
58.9 Loads and Weights
58.10 Sound Level
58.11 Vibration Level
58.12 Cab Classification According to EN 15695-1 (for Application of Crop Protection Chemicals and Liquid Fertilizer)
58.13 Ground Speeds?e23? Transmission
58.14 Ground Speeds?IVT?/AutoPowr? Transmission
58.15 Machine Design Life
58.16 Eurasian Economic Union
58.17 Required Emission-Related Information
58.18 Carbon Dioxide Emissions (CO?)
59 Identification Numbers
59.1 Identification Plates
59.2 Product Identification Number (PIN)
59.3 Product Identification Number (PIN) (China Only)
59.4 Engine Serial Number
59.5 Cab Serial Number
59.6 Transmission Serial Number
59.7 Track Serial Numbers
59.8 Keep Proof of Ownership
59.9 Keep Machines Secure
60 Change of Ownership
60.1 Subsequent Ownership
61 Predelivery
61.1 Predelivery Checklist
61.2 Delivery Checklist and Certificate
62 Index
63 John Deere Service Literature Available
63.1 Technical Information
64 John Deere Service Keeps You on the Job
64.1 John Deere Parts
64.2 The Right Tools
64.3 Well-Trained Technicians
64.4 Prompt Service